--- 
# TinyTapeout project information
project:
  wokwi_id:    341610418650743378        # If using wokwi, set this to your project's ID
#  source_files:        # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here. Source files must be in ./src
#    - counter.v
#    - decoder.v
#  top_module:  "seven_segment_seconds"      # put the name of your top module here, make it unique by prepending your github username

# As everyone will have access to all designs, try to make it easy for someone new to your design to know what
# it does and how to operate it.
#
# Here is an example: https://github.com/mattvenn/tinytapeout_m_segments/blob/main/info.yaml
#
# This info will be automatically collected and used to make a datasheet for the chip.
documentation: 
  author:       "Thorsten Knoll"      # Your name
  discord:      ""      # Your discord handle
  title:        "8x8 Bit Pattern Player"      # Project title
  description:  "8x8 bit serial programmable, addressable and playable memory."      # Short description of what your project does
  how_it_works: "The 8x8 memory is a 64-bit shiftregister, consisting of 64 serial chained D-FlipFlops (data: IN0, clk_sr: IN1). 8 memoryslots of each 8 bit can be directly addressed via addresslines (3 bit: IN2, IN3, IN4) or from a clockdriven player (3 bit counter, clk_pl: IN7). A mode selector line (mode: IN5) sets the operation mode to addressing or to player. The 8 outputs are driven by the 8 bit of the addressed memoryslot."      # Longer description of how the project works
  how_to_test:  "Programm the memory: Start by filling the 64 bit shiftregister via data and clk_sr, each rising edge on clk_sr shifts a new data bit into the register. Select mode: Set mode input for direct addressing or clockdriven player. Address mode: Address a memoryslot via the three addresslines and watch the memoryslot at the outputs. Player mode: Each rising edge at clk_pl enables the next memoryslot to the outputs."      # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed
  external_hw:  "You could programm, address and play the 8x8 Bit Pattern Player with a breadboard, two clock buttons and some dipswitches on the input side. Add some LED to the output side. Just like the WOKWI simulation."      # Describe any external hardware needed
  language:     "wokwi" # other examples include Verilog, Amaranth, VHDL, etc
  doc_link:     ""      # URL to longer form documentation, eg the README.md in your repository
  clock_hz:     0       # Clock frequency in Hz (if required)
  picture:      ""      # relative path to a picture in your repository
  inputs:
    - data
    - clk_sr
    - address_0
    - address_1
    - address_2
    - mode
    - none
    - clk_pl
  outputs:
    - bit 0
    - bit 1
    - bit 2
    - bit 3
    - bit 4
    - bit 5
    - bit 6
    - bit 7