Initial commit
diff --git a/verilog/rtl/defines.v b/verilog/rtl/defines.v
new file mode 100644
index 0000000..44a29a0
--- /dev/null
+++ b/verilog/rtl/defines.v
@@ -0,0 +1,66 @@
+// SPDX-FileCopyrightText: 2020 Efabless Corporation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+
+`default_nettype none
+
+`ifndef __GLOBAL_DEFINE_H
+// Global parameters
+`define __GLOBAL_DEFINE_H
+
+`define MPRJ_IO_PADS_1 19 /* number of user GPIO pads on user1 side */
+`define MPRJ_IO_PADS_2 19 /* number of user GPIO pads on user2 side */
+`define MPRJ_IO_PADS (`MPRJ_IO_PADS_1 + `MPRJ_IO_PADS_2)
+
+`define MPRJ_PWR_PADS_1 2 /* vdda1, vccd1 enable/disable control */
+`define MPRJ_PWR_PADS_2 2 /* vdda2, vccd2 enable/disable control */
+`define MPRJ_PWR_PADS (`MPRJ_PWR_PADS_1 + `MPRJ_PWR_PADS_2)
+
+// Analog pads are only used by the "caravan" module and associated
+// modules such as user_analog_project_wrapper and chip_io_alt.
+
+`define ANALOG_PADS_1 5
+`define ANALOG_PADS_2 6
+
+`define ANALOG_PADS (`ANALOG_PADS_1 + `ANALOG_PADS_2)
+
+// Size of soc_mem_synth
+
+// Type and size of soc_mem
+// `define USE_OPENRAM
+`define USE_CUSTOM_DFFRAM
+// don't change the following without double checking addr widths
+`define MEM_WORDS 256
+
+// Number of columns in the custom memory; takes one of three values:
+// 1 column : 1 KB, 2 column: 2 KB, 4 column: 4KB
+`define DFFRAM_WSIZE 4
+`define DFFRAM_USE_LATCH 0
+
+// not really parameterized but just to easily keep track of the number
+// of ram_block across different modules
+`define RAM_BLOCKS 1
+
+// Clock divisor default value
+`define CLK_DIV 3'b010
+
+// GPIO control default mode and enable for most I/Os
+// Most I/Os set to be user input pins on startup.
+// NOTE: To be modified, with GPIOs 5 to 35 being set from a build-time-
+// programmable block.
+`define MGMT_INIT 1'b0
+`define OENB_INIT 1'b0
+`define DM_INIT 3'b001
+
+`endif // __GLOBAL_DEFINE_H
\ No newline at end of file
