diff --git a/README.md b/README.md
index 34b9a05..3dacd8b 100644
--- a/README.md
+++ b/README.md
@@ -2,10 +2,45 @@
 
 [![License](https://img.shields.io/badge/License-Apache%202.0-blue.svg)](https://opensource.org/licenses/Apache-2.0) [![UPRJ_CI](https://github.com/efabless/caravel_project_example/actions/workflows/user_project_ci.yml/badge.svg)](https://github.com/efabless/caravel_project_example/actions/workflows/user_project_ci.yml) [![Caravel Build](https://github.com/efabless/caravel_project_example/actions/workflows/caravel_build.yml/badge.svg)](https://github.com/efabless/caravel_project_example/actions/workflows/caravel_build.yml)
 
-| :exclamation: Important Note            |
+| :exclamation: GF180mcuC shuttle MPW0            |
 |-----------------------------------------|
 
-## Please fill in your project documentation in this README.md file 
+## Binary Counter
+
+This is a binary counter with `clock`, `reset`, `data_in`, `scanload`, and `count_out`.
+
+The counter design (gdsii file) is located at [here](https://github.com/AyaseErii/gf180-demo-sequential_counter/tree/main/openlane/cntr_example/runs/cntr_example/results/final/gds) and the wrappered counter (gdsii file) is located at [here](https://github.com/AyaseErii/gf180-demo-sequential_counter/tree/main/openlane/user_project_wrapper/runs/user_project_wrapper/results/final/gds).
+
+### Step 1: Create the Digital Counter Design
+Before running the design flow, please make sure the gf180 PDK was installed correctly. For the information about switching PDK from `sky130` to `gf180mcuC`, you may refer to [this video](https://www.youtube.com/watch?v=4-kISttsPbY). (Great thanks to Matt)
+
+Once you have done with PDK setups, you can simply follow the commands below after you changed the corresponding [cntr_example.v](https://github.com/AyaseErii/gf180-demo-sequential_counter/blob/main/verilog/rtl/cntr_example.v), [config.tcl](https://github.com/AyaseErii/gf180-demo-sequential_counter/blob/main/openlane/cntr_example/config.tcl) file, all files in the [includes](https://github.com/AyaseErii/gf180-demo-sequential_counter/tree/main/verilog/includes) directory, and the [user_netlist.v](https://github.com/AyaseErii/gf180-demo-sequential_counter/blob/main/verilog/rtl/uprj_netlists.v) of the counter:
+```
+git clone https://github.com/AyaseErii/gf180-demo-binary_counter.git
+cd gf180-demo-binary_counter
+make cntr_example
+```
+
+The command above will generate the digital counter design (gdsii) and all necessary files for the next step---wrapper the design in to `user_project_wrapper`.
+
+### Step 2: Create the Wrappered Digital Counter
+
+Before running the flow of `user_project_wrapper`, please make sure you changed the [user_project_wrapper.v](https://github.com/AyaseErii/gf180-demo-sequential_counter/blob/main/verilog/rtl/user_project_wrapper.v), [config.tcl](https://github.com/AyaseErii/gf180-demo-sequential_counter/blob/main/openlane/user_project_wrapper/config.tcl) of the `user_project_wrapper.v`, and [macro.cfg](https://github.com/AyaseErii/gf180-demo-sequential_counter/blob/main/openlane/user_project_wrapper/macro.cfg) for macro placement.
+
+Once you have done with the above commands, you need to go to `gf180-demo-binary_counter` directory again, and use the command below:
+```
+make user_project_wrapper
+```
+
+After the flow compeleted, you can repeat the Step 2 iteratively until you get a satisfied design.
+
+## Contributors
+Jun (Jerry) Yin, Ceylan M. Morgul, Rahul Sreekumar, Xuanjia (Eric) Bi, and Mircea R. Stan.
+
+ECE department of University of Virginia
+
+
+## Additional Information about Caravel
 
 Refer to [README](docs/source/index.rst#section-quickstart) for a quickstart of how to use caravel_user_project