Google Git
Sign in
foss-eda-tools / third_party / opencircuitdesign.com / open_pdks / e993c83c88a43938b052b3f218718377c03d721e
  1. e993c83 Perform substitution on the PDN config side by Ahmed Ghazy · 4 years, 2 months ago 1.0.121
  2. 8aa4680 Once again updated the density pattern generator for what I hope are by Tim Edwards · 4 years, 2 months ago
  3. 3747060 Updated VERSION with pull request #105 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago
  4. 64a0956 Fixes and reorganization of the KLayout DRC deck by Ahmed Ghazy · 4 years, 2 months ago
  5. 86e6b07 Additional fine-tuning of the fill generation of all metal layers by Tim Edwards · 4 years, 2 months ago 1.0.120
  6. 4e3acd0 Additional correction to the density check script to update the by Tim Edwards · 4 years, 2 months ago 1.0.119
  7. c5c7379 Updated clear area density limits based on input from SkyWater. by Tim Edwards · 4 years, 2 months ago 1.0.118
  8. 177a318 Adjusted LI coarse fill spacing from 600 to 650 to reduce the maximum by Tim Edwards · 4 years, 2 months ago
  9. 9afaf3c Updated VERSION along with the last pull request #104 from Amr Gouhar. by Tim Edwards · 4 years, 2 months ago
  10. 6eaca1c Add yosys mux mapping. by agorararmard · 4 years, 2 months ago
  11. 4ab52d3 Updated the sky130gds.tech file to include an assortment of DRC by Tim Edwards · 4 years, 2 months ago 1.0.117
  12. 522a373 Added some complexity to the NPC implant layer generation to avoid by Tim Edwards · 4 years, 2 months ago
  13. 3ee5f11 [yosys] copy latch mapping.. by agorararmard · 4 years, 2 months ago
  14. 0708640 [openlane] add pointer to no synth list -- first step to design specific lists by agorararmard · 4 years, 2 months ago
  15. 3267bbb [openlane] set default cell pad to 4 by agorararmard · 4 years, 2 months ago
  16. 0528408 Added "mask-hints" output capability for layers LVTN and HVTP, which by Tim Edwards · 4 years, 2 months ago 1.0.116
  17. 9297bd0 Corrections and updates to the bump-bond technology file and accompanying by Tim Edwards · 4 years, 2 months ago
  18. 4d081b8 Added a set of Tcl routines for generating bump bonds for the Micross by Tim Edwards · 4 years, 2 months ago 1.0.115
  19. 367711e Added IRSIM parameter files to libs.tech/irsim/ as part of the installation. by Tim Edwards · 4 years, 2 months ago
  20. f42ccfb Updating VERSION with pull requests 101 and 102 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago
  21. 6f713ba Correct 'fd' -> 'ef' in fakediode by Ahmed Ghazy · 4 years, 2 months ago
  22. 6a2161a Fix fakediode name by Anton Blanchard · 4 years, 2 months ago
  23. af622f5 Fix fakediode views by Ahmed Ghazy · 4 years, 2 months ago 1.0.114
  24. f8d1c69 Updated VERSION by Tim Edwards · 4 years, 2 months ago
  25. 19260c2 Don't recursively expand SKYWATER_PATH by Ahmed Ghazy · 4 years, 2 months ago
  26. b0f7839 Updated VERSION. by Tim Edwards · 4 years, 2 months ago 1.0.113
  27. 66e53e5 Applied patch from Mohamed Gaber that fixes the issue of the by Tim Edwards · 4 years, 2 months ago
  28. ec43817 Added "random seed" to the magic startup file so that the behavior by Tim Edwards · 4 years, 2 months ago 1.0.112
  29. bb8ab29 Added verilog file for the "fake diode" cell used by openlane in sky130_fd_sc_hd. by Tim Edwards · 4 years, 2 months ago
  30. b0b0675 Force GDS reads in magic to ignore layer 236:0, which is some kind by Tim Edwards · 4 years, 2 months ago
  31. 95c92cc Updated version after merging pull request #95 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago 1.0.111
  32. 3238548 Check for 'patch' in configure script by Ahmed Ghazy · 4 years, 2 months ago
  33. 7875f1e Add missing MINENCLOSEDAREA as patches for now... by Ahmed Ghazy · 4 years, 2 months ago
  34. d6807dc Merged pull request 94 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago 1.0.110
  35. 145911d Add a KLayout report description by Ahmed Ghazy · 4 years, 2 months ago
  36. 3f0ab9d Merged pull request #93 from Ahmed Ghazy (Klayout DRC setup file). by Tim Edwards · 4 years, 2 months ago 1.0.109
  37. dfe9eb5 Some fixes to sky130A klayout DRC script by Ahmed Ghazy · 4 years, 2 months ago
  38. f066456 Modified the metal5 density pattern generation to make up a small by Tim Edwards · 4 years, 2 months ago 1.0.108
  39. f46e26c Updated VERSION to go along with the merge of pull request 91 from Amr Gouhar. by Tim Edwards · 4 years, 2 months ago
  40. 1a6ece5 The lazy workaround for the utf-8 encoding issue by agorararmard · 4 years, 2 months ago
  41. 2256158 auto generate drc run_set by agorararmard · 4 years, 2 months ago
  42. c3a2319 add klayout lydrc from @laurentc2 by agorararmard · 4 years, 2 months ago
  43. e494740 Corrected density check script, and corrected the LI fill generation by Tim Edwards · 4 years, 2 months ago
  44. e6d41be Updated VERSION to go along with pull request #90 from Amr Gouhar. by Tim Edwards · 4 years, 2 months ago 1.0.107
  45. d79b010 Update config.tcl by Amr A. Gouhar · 4 years, 2 months ago
  46. fce0ba7 add @laurentc2 klayout setup to replace the current klayout setup by agorararmard · 4 years, 2 months ago
  47. f687d7d add GDS_FILES pointer and a KLAYOUT_TECH, PROPERTIES pointers by agorararmard · 4 years, 2 months ago
  48. 113b083 Corrected the fill generation script to avoid dropping fill outside by Tim Edwards · 4 years, 2 months ago
  49. 7324f65 Corrected the metal5 fill patterning, as the size of the fill shapes by Tim Edwards · 4 years, 2 months ago 1.0.106
  50. 9ff76c5 Added a cifoutput section called "density" for more efficient density checking. by Tim Edwards · 4 years, 2 months ago 1.0.105
  51. 7904e76 Tweaked the fill pattern slots operators to ensure a maximum fill by Tim Edwards · 4 years, 2 months ago
  52. a1b8740 Removed a wayward line from the tech file that was a non-syntactical by Tim Edwards · 4 years, 2 months ago
  53. 828a78d Corrected an error in the magic techfile which was left over from an by Tim Edwards · 4 years, 2 months ago
  54. 16a9caa Created the wrong filename for the GDS of the custom sky130_ef_io in the by Tim Edwards · 4 years, 3 months ago 1.0.104
  55. 86b82b4 Corrected the sky130_ef_io__vdda_hvc_clamped_pad cell, which had the clamp by Tim Edwards · 4 years, 3 months ago
  56. acba407 Changed the layer assignments for the fill layers to match what by Tim Edwards · 4 years, 3 months ago 1.0.103
  57. a7915ea Added parameter handling in extraction of MOSFET devices for source by Tim Edwards · 4 years, 3 months ago
  58. d14571f Corrected the sky130 Makefile to put the special handling of the by Tim Edwards · 4 years, 3 months ago
  59. 4e5bf21 Modified the magic techfile to remove the CELLRING templayer from the by Tim Edwards · 4 years, 3 months ago
  60. 49fc712 Once again edited the same clamp-connected pad layouts, this time to remove a by Tim Edwards · 4 years, 3 months ago 1.0.102
  61. ad38fd9 Corrected the sky130_ef_io.gds file to correct the position of the overlay cell by Tim Edwards · 4 years, 3 months ago
  62. c02ef36 Initial None setting for tclscript to prevent referencing a non- by Tim Edwards · 4 years, 3 months ago 1.0.101
  63. 26ab496 Minor update which allows a custom Tcl script to be inserted in the by Tim Edwards · 4 years, 3 months ago 1.0.100
  64. 8255ead Made a very minor change to the README file to reflect the new by Tim Edwards · 4 years, 3 months ago 1.0.99
  65. 0b1a873 Changed one instance of licon in the sky130.tcl PDK file to mcon. by Tim Edwards · 4 years, 3 months ago 1.0.98
  66. c9b68fa Removed the name "licon" from the magic techfile, as it is used by Tim Edwards · 4 years, 3 months ago
  67. 14db348 Changed the magic tech file so that it recognizes "obsactive" and by Tim Edwards · 4 years, 3 months ago
  68. ca85a19 Modified the corner cell in the padframe corner overlay to add by Tim Edwards · 4 years, 3 months ago
  69. 1213189 Update routing version of the IOs by Ahmed Ghazy · 4 years, 3 months ago 1.0.97
  70. 5b88ed4 Fill violating met1 holes in the clamp overlays by Ahmed Ghazy · 4 years, 3 months ago
  71. fe360fe Remove 0.015um met5 notch on {,dis}connect cells by Ahmed Ghazy · 4 years, 3 months ago
  72. a0cdd34 Corrected one typo in the fill generation script. by Tim Edwards · 4 years, 3 months ago
  73. 4d46bac Added the fill generation to the make script so that it gets installed by Tim Edwards · 4 years, 3 months ago
  74. b71e5f8 Added a full fill generation script which breaks a design up into by Tim Edwards · 4 years, 3 months ago
  75. debc0a4 Additional support for automatically searching standard places for by Tim Edwards · 4 years, 3 months ago 1.0.96
  76. b4d6a5d Corrected one error with an overlay pad, which was colliding with via3s in different by Tim Edwards · 4 years, 3 months ago
  77. 916492d A number of changes to the magic techfile: (1) Added more mask-hints by Tim Edwards · 4 years, 3 months ago
  78. d25b500 First draft of a complete CDL/SPICE netlist for the sky130_ef_io by Tim Edwards · 4 years, 3 months ago 1.0.95
  79. c7ab1ea Corrected a comment line in the Makefile to match the text of the by Tim Edwards · 4 years, 3 months ago 1.0.94
  80. 8292c90 Ran last commit from the wrong directory and didn't catch most of the by Tim Edwards · 4 years, 3 months ago
  81. 942a14f Updates from Donn to enable open_pdks to clone and install repositories by Tim Edwards · 4 years, 3 months ago
  82. 0e6036e Moved the fill type GDS import into the regular GDS import instead by Tim Edwards · 4 years, 3 months ago
  83. 2548294 Changes to the techfile and netgen setup file in support of the by Tim Edwards · 4 years, 3 months ago
  84. ccaea72 Changes from Donn to enhance the configuration script to allow specific by Tim Edwards · 4 years, 3 months ago
  85. 8c1ff41 Reapply connect/disconnect cell fixes from fe967d6 by Ahmed Ghazy · 4 years, 3 months ago 1.0.93
  86. bba9bd1 Added support in the magic tech file for ESD devices of the 5V nFET by Tim Edwards · 4 years, 3 months ago
  87. 48e7c84 Added ESD devices for the 5V nFET and pFET, which are essentially by Tim Edwards · 4 years, 3 months ago
  88. 9a5ad98 Remove leftover pin declarations in a clamped pad by Ahmed Ghazy · 4 years, 3 months ago
  89. d6e4aa8 PAD GROUND -> PAD POWER by Ahmed Ghazy · 4 years, 3 months ago
  90. 8b0e07a Restore I/O bus fillers from 0ad7fc94a by Ahmed Ghazy · 4 years, 3 months ago
  91. 59a7846 Added the netlist_to_layout python script that reads a SPICE netlist by Tim Edwards · 4 years, 3 months ago
  92. 5dca478 Corrected the netgen setup file, which was missing the nfet 5V by Tim Edwards · 4 years, 3 months ago
  93. 6ead3cf Added some devices to the sky130_setup.tcl file that had not been by Tim Edwards · 4 years, 3 months ago 1.0.92
  94. 44b715a Ignore fill and tap cells in device level LVS by Mitch Bailey · 4 years, 3 months ago 1.0.91
  95. d16294d Forgot to update VERSION in the previous commit. by Tim Edwards · 4 years, 3 months ago
  96. 94aa2af Added eight more overlay combination cells; these create connections between by Tim Edwards · 4 years, 3 months ago
  97. 88bd42e Added a filter to transform the sky130_ml_xx_hd library from by Tim Edwards · 4 years, 3 months ago 1.0.90
  98. ebc20a2 Corrected the widespacing rules in the techfile so that they are by Tim Edwards · 4 years, 3 months ago
  99. bcf59aa Added support for Paul Schulz's alphanumeric font character library by Tim Edwards · 4 years, 3 months ago 1.0.89
  100. 045bf8e Modified the magic tech file so that fill patterns are all generated by Tim Edwards · 4 years, 3 months ago 1.0.88