Google Git
Sign in
foss-eda-tools / third_party / opencircuitdesign.com / open_pdks / 75dea45ea9e5b1c971cc7c2e12a35d3add3ec158 / VERSION
  1. 75dea45 Corrected a tiny but very bad typo in the magic techfile which by Tim Edwards · 3 years, 11 months ago 1.0.159
  2. 9930f07 Modified the PNP device patch to additionally change the PNP device by Tim Edwards · 3 years, 11 months ago
  3. a12a941 Modified the techfile to not add nwell under pfetarea in cifinput by Tim Edwards · 3 years, 11 months ago 1.0.157
  4. 00bfca5 Complete implementation of monte carlo simulation. Enables the by Tim Edwards · 3 years, 11 months ago
  5. 9fdf5f0 Added scripts to convert the statistics blocks to monte carlo by Tim Edwards · 3 years, 11 months ago 1.0.155
  6. 665c3fd Apparently didn't commit the change to the configure script after by Tim Edwards · 3 years, 11 months ago 1.0.154
  7. afed437 Changed the sed scripts in the sky130/Makefile to put a backslash by Tim Edwards · 4 years ago
  8. f63ee05 Added several patches and corrections to the device models: by Tim Edwards · 4 years ago
  9. 980e8f3 Small change to the configure script to properly mark the options that by Tim Edwards · 4 years ago
  10. 25972f8 Modified the Makefile to correct several errors when installing by Tim Edwards · 4 years ago
  11. 96fac88 Corrected typos in the name of the macro for sky130_ef_io__analog_pad in the by Tim Edwards · 4 years ago 1.0.149
  12. 4bc2df2 Made some chages to the "run_standard_drc.py" script so that it by Tim Edwards · 4 years ago 1.0.148
  13. 60211a2 Added a placeholder subcircuit definition for sky130_fd_io__condiode, by Tim Edwards · 4 years ago
  14. f788cea Updated the technology file to better represent the exact DRC by Tim Edwards · 4 years ago 1.0.146
  15. bafbda7 Added a new type "isosub" to the magic techfile, for isolating by Tim Edwards · 4 years ago 1.0.145
  16. ee44593 Added support for the 3.3V native nFET device (in addition to the by Tim Edwards · 4 years ago
  17. b6e8c7e Added the (corrected and verified) netlists for sky130_fd_io as a by Tim Edwards · 4 years ago 1.0.143
  18. 8c59e41 Modified the magic techfile "cifinput" section to always draw a pwell by Tim Edwards · 4 years ago 1.0.142
  19. f04c421 Corrected the sky130 Makefile so that if the repository is checked out by Tim Edwards · 4 years ago
  20. 10aa9ab Added spinit file under custom/models to get the correct startup by Tim Edwards · 4 years ago 1.0.140
  21. 053cff3 Modified the Makefile to install some of the common scripts into by Tim Edwards · 4 years ago 1.0.139
  22. 708a942 Added hooks to the Tcl code in magic for schematic-to-layout by Tim Edwards · 4 years, 1 month ago 1.0.138
  23. d486e08 Updated version with the merger of pull request #118 from Manar. by Tim Edwards · 4 years, 1 month ago 1.0.137
  24. 7dbca1a Slight extension to the "options=" option to allow the value to be by Tim Edwards · 4 years, 1 month ago 1.0.136
  25. dcfd6fd Updated version along with pull request #117. by Tim Edwards · 4 years, 1 month ago
  26. 2e6d629 Modified the netgen setup to allow parallelizing of a number of by Tim Edwards · 4 years, 1 month ago 1.0.134
  27. 22b9174 Updated the VERSION. by Tim Edwards · 4 years, 1 month ago 1.0.133
  28. 8830dfe Modified the Makefiles to include a "make uninstall" to remove an installed PDK. by Tim Edwards · 4 years, 1 month ago
  29. 43b065d Updated VERSION along with merging pull requests #115 and #116. by Tim Edwards · 4 years, 1 month ago 1.0.131
  30. 08288f6 Updated VERSION with the merge of pull request #114 by Tim Edwards · 4 years, 1 month ago 1.0.130
  31. ce8e284 Incremented VERSION to go along with pull request #113. by Tim Edwards · 4 years, 1 month ago 1.0.129
  32. c686c10 Corrected the sky130 setup file for netgen so that the poly resistor by Tim Edwards · 4 years, 1 month ago 1.0.128
  33. 9dce9de Updates to VERSION to go along with pull requests 111 and 112, and by Tim Edwards · 4 years, 1 month ago
  34. 5df1628 Continuing updates to the xcircuit installation for sky130. by Tim Edwards · 4 years, 1 month ago
  35. 6e20d4f Continued work on the xcircuit libraries for sky130. by Tim Edwards · 4 years, 1 month ago
  36. 9134eed Fixes to the (work in progress) xcircuit installation, and added a by Tim Edwards · 4 years, 1 month ago
  37. e4c4409 Added preliminary (and unfinished) xcircuit integration. by Tim Edwards · 4 years, 1 month ago 1.0.123
  38. 4afc592 Corrected the GDS file for the custom fill-12 cell. by Tim Edwards · 4 years, 2 months ago
  39. 3747060 Updated VERSION with pull request #105 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago
  40. 86e6b07 Additional fine-tuning of the fill generation of all metal layers by Tim Edwards · 4 years, 2 months ago 1.0.120
  41. 4e3acd0 Additional correction to the density check script to update the by Tim Edwards · 4 years, 2 months ago 1.0.119
  42. 9afaf3c Updated VERSION along with the last pull request #104 from Amr Gouhar. by Tim Edwards · 4 years, 2 months ago
  43. 4ab52d3 Updated the sky130gds.tech file to include an assortment of DRC by Tim Edwards · 4 years, 2 months ago 1.0.117
  44. 522a373 Added some complexity to the NPC implant layer generation to avoid by Tim Edwards · 4 years, 2 months ago
  45. 9297bd0 Corrections and updates to the bump-bond technology file and accompanying by Tim Edwards · 4 years, 2 months ago
  46. f42ccfb Updating VERSION with pull requests 101 and 102 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago
  47. f8d1c69 Updated VERSION by Tim Edwards · 4 years, 2 months ago
  48. b0f7839 Updated VERSION. by Tim Edwards · 4 years, 2 months ago 1.0.113
  49. b0b0675 Force GDS reads in magic to ignore layer 236:0, which is some kind by Tim Edwards · 4 years, 2 months ago
  50. 95c92cc Updated version after merging pull request #95 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago 1.0.111
  51. d6807dc Merged pull request 94 from Ahmed Ghazy. by Tim Edwards · 4 years, 2 months ago 1.0.110
  52. 3f0ab9d Merged pull request #93 from Ahmed Ghazy (Klayout DRC setup file). by Tim Edwards · 4 years, 2 months ago 1.0.109
  53. f46e26c Updated VERSION to go along with the merge of pull request 91 from Amr Gouhar. by Tim Edwards · 4 years, 2 months ago
  54. e6d41be Updated VERSION to go along with pull request #90 from Amr Gouhar. by Tim Edwards · 4 years, 2 months ago 1.0.107
  55. 7324f65 Corrected the metal5 fill patterning, as the size of the fill shapes by Tim Edwards · 4 years, 3 months ago 1.0.106
  56. 828a78d Corrected an error in the magic techfile which was left over from an by Tim Edwards · 4 years, 3 months ago
  57. 86b82b4 Corrected the sky130_ef_io__vdda_hvc_clamped_pad cell, which had the clamp by Tim Edwards · 4 years, 3 months ago
  58. 4e5bf21 Modified the magic techfile to remove the CELLRING templayer from the by Tim Edwards · 4 years, 3 months ago
  59. ad38fd9 Corrected the sky130_ef_io.gds file to correct the position of the overlay cell by Tim Edwards · 4 years, 3 months ago
  60. c02ef36 Initial None setting for tclscript to prevent referencing a non- by Tim Edwards · 4 years, 3 months ago 1.0.101
  61. 26ab496 Minor update which allows a custom Tcl script to be inserted in the by Tim Edwards · 4 years, 3 months ago 1.0.100
  62. 8255ead Made a very minor change to the README file to reflect the new by Tim Edwards · 4 years, 3 months ago 1.0.99
  63. ca85a19 Modified the corner cell in the padframe corner overlay to add by Tim Edwards · 4 years, 3 months ago
  64. b71e5f8 Added a full fill generation script which breaks a design up into by Tim Edwards · 4 years, 3 months ago
  65. b4d6a5d Corrected one error with an overlay pad, which was colliding with via3s in different by Tim Edwards · 4 years, 3 months ago
  66. d25b500 First draft of a complete CDL/SPICE netlist for the sky130_ef_io by Tim Edwards · 4 years, 3 months ago 1.0.95
  67. ccaea72 Changes from Donn to enhance the configuration script to allow specific by Tim Edwards · 4 years, 3 months ago
  68. 59a7846 Added the netlist_to_layout python script that reads a SPICE netlist by Tim Edwards · 4 years, 3 months ago
  69. 6ead3cf Added some devices to the sky130_setup.tcl file that had not been by Tim Edwards · 4 years, 3 months ago 1.0.92
  70. d16294d Forgot to update VERSION in the previous commit. by Tim Edwards · 4 years, 3 months ago
  71. ebc20a2 Corrected the widespacing rules in the techfile so that they are by Tim Edwards · 4 years, 3 months ago
  72. bcf59aa Added support for Paul Schulz's alphanumeric font character library by Tim Edwards · 4 years, 3 months ago 1.0.89
  73. 5bd81e4 Updated the technology file to use the "requires" keyword, which by Tim Edwards · 4 years, 3 months ago
  74. ea38676 Added some exclusions for COREID areas to cifinput recipes that are by Tim Edwards · 4 years, 3 months ago 1.0.87
  75. cc521e8 Corrected the handling of POLYTXT and POLYPIN layers on GDS reads, by Tim Edwards · 4 years, 4 months ago
  76. 27543d4 Added SITE and SYMMETRY entries for the sky130_ef_sc_hd__fakediode_2 LEF view. by Tim Edwards · 4 years, 4 months ago
  77. 9f60b62 Updated VERSION to go along with the pull of the CI yaml file for CloudV. by Tim Edwards · 4 years, 4 months ago
  78. 0666931 Corrected the configuration script to correctly handle an absent by Tim Edwards · 4 years, 4 months ago
  79. 9ad3045 Modifications to the waffle fill pattern generator output style. by Tim Edwards · 4 years, 4 months ago 1.0.82
  80. cdb9c29 Added a bare wirebond pad structure to the list of cells in the sky130_ef_io by Tim Edwards · 4 years, 4 months ago
  81. fe967d6 Corrected minor offsets in the metal positions of the special I/O bus connect by Tim Edwards · 4 years, 4 months ago 1.0.80
  82. 22fdb44 Modified the LEF views of the I/O padring filler cells so that they do not cover by Tim Edwards · 4 years, 4 months ago
  83. e0f2c05 Updated revision to go along with the latest pull request merge. by Tim Edwards · 4 years, 4 months ago
  84. 8688323 Updated the revision to go along with recent pull request merges. by Tim Edwards · 4 years, 4 months ago 1.0.77
  85. 8469aa6 Added option to the poly resistor to use a high-voltage well for the guard ring. by Tim Edwards · 4 years, 4 months ago
  86. 9314dea Corrected the MiM cap rules (some of which were more conservative by Tim Edwards · 4 years, 4 months ago
  87. 3f7ee64 Corrected rule poly.9 so that it is not flagged by type "rmp", which by Tim Edwards · 4 years, 4 months ago
  88. 60d84c2 Added the layouts used for DRC ruleset development to sky130/custom/drc/. by Tim Edwards · 4 years, 4 months ago
  89. 02c0193 Added a new script in common/ "cleanup_unref.py" which removes all by Tim Edwards · 4 years, 4 months ago
  90. 275e28d Updated the version number and corrected a typo preventing vias from by Tim Edwards · 4 years, 4 months ago
  91. 7d5c22f Corrected latchup DRC rules for nwells to include the special pnp layer by Tim Edwards · 4 years, 4 months ago 1.0.70
  92. 2f132fd Corrected misspellings of device model names as pointed out by by Tim Edwards · 4 years, 4 months ago
  93. ab7cf0d Reworked the THKOX (HVI) layer output generation rules; it now by Tim Edwards · 4 years, 4 months ago 1.0.68
  94. ad548dc Updated version to go along with the pull request and other changes by Tim Edwards · 4 years, 4 months ago 1.0.67
  95. c3baf46 Changed the Makefile.in file so that it sets the "version" value in by Tim Edwards · 4 years, 4 months ago 1.0.66
  96. 94513d4 Modified the seal ring abstract view so that it shows as DRC clean by Tim Edwards · 4 years, 4 months ago 1.0.65
  97. fe5a33e Corrected the other cifinput style (vendorimport) with the same by Tim Edwards · 4 years, 4 months ago 1.0.64
  98. 2bdf3b9 Revised the rule for checking (effectively) HVI to nwell spacing. This by Tim Edwards · 4 years, 5 months ago
  99. e363ce4 Added a missing DRC rule for poly to HV-diffusion spacing. by Tim Edwards · 4 years, 5 months ago
  100. c31a41f Updated the sky130/README file to include adding sky130_fd_io as a by Tim Edwards · 4 years, 5 months ago