Google Git
Sign in
foss-eda-tools / third_party / opencircuitdesign.com / open_pdks / 3c1dd9a814f53f3d01baaeb04639040547457f02 / sky130 / magic / sky130.tech
  1. 3c1dd9a Revised the code that generates MiM caps in the PDK Tcl scripts, by Tim Edwards · 4 years, 4 months ago 1.0.75
  2. 374485b To go along with the last commit, diffusion resistors must be included by Tim Edwards · 4 years, 4 months ago
  3. c664d8c Removed the rndiff, rpdiff spacing to contact rules, which do not by Tim Edwards · 4 years, 4 months ago
  4. 5ad4eb4 Corrected rule cap2m.8, as it implies that stacked MiM caps may not by Tim Edwards · 4 years, 4 months ago
  5. 9314dea Corrected the MiM cap rules (some of which were more conservative by Tim Edwards · 4 years, 4 months ago
  6. 3f7ee64 Corrected rule poly.9 so that it is not flagged by type "rmp", which by Tim Edwards · 4 years, 4 months ago
  7. 22ff74f Corrected "corelocali" layer rules so that magic does not raise by Tim Edwards · 4 years, 4 months ago 1.0.73
  8. d53c800 Corrected magic extraction rule for the high-resistance poly by Tim Edwards · 4 years, 4 months ago
  9. 7d5c22f Corrected latchup DRC rules for nwells to include the special pnp layer by Tim Edwards · 4 years, 4 months ago 1.0.70
  10. 2f132fd Corrected misspellings of device model names as pointed out by by Tim Edwards · 4 years, 4 months ago
  11. ab7cf0d Reworked the THKOX (HVI) layer output generation rules; it now by Tim Edwards · 4 years, 4 months ago 1.0.68
  12. eacb0a6 Change to the magic techfile to more properly handle the THKOX by Tim Edwards · 4 years, 4 months ago
  13. 94513d4 Modified the seal ring abstract view so that it shows as DRC clean by Tim Edwards · 4 years, 4 months ago 1.0.65
  14. fe5a33e Corrected the other cifinput style (vendorimport) with the same by Tim Edwards · 4 years, 4 months ago 1.0.64
  15. b04723d Modified DRC rule for li to allow 45 degree angles inside the SRAM core by Tim Edwards · 4 years, 4 months ago 1.0.63
  16. ec2e28b Removed redundant extraction entries for two of the nFET devices by Tim Edwards · 4 years, 4 months ago
  17. 8d30fd3 Corrected the GDS read-in so that it correctly separates out the by Tim Edwards · 4 years, 4 months ago
  18. 0747adc Modified the definition of device ppu to include HVTP, as otherwise by Tim Edwards · 4 years, 4 months ago
  19. 2bdf3b9 Revised the rule for checking (effectively) HVI to nwell spacing. This by Tim Edwards · 4 years, 4 months ago
  20. e15b352 Moved two DRC-CIF rules out of the drc(fast) variant because that by Tim Edwards · 4 years, 4 months ago 1.0.62
  21. 0984f47 Added additional rule for HVNTM spacing, especially for nhvnative by Tim Edwards · 4 years, 4 months ago
  22. a91a117 Added additional rules for HV nwell spacing, taps without contacts, by Tim Edwards · 4 years, 4 months ago
  23. e363ce4 Added a missing DRC rule for poly to HV-diffusion spacing. by Tim Edwards · 4 years, 4 months ago
  24. ef20cbd And one more typo fixed. by Tim Edwards · 4 years, 4 months ago 1.0.61
  25. 01718ed Corrected minor typo in the last commit. by Tim Edwards · 4 years, 4 months ago
  26. e162c05 Corrected rules for poly spacing to poly resistor, which was causing by Tim Edwards · 4 years, 4 months ago
  27. 3271291 Corrected typos that crept into the MiM2 cap section after copy and by Tim Edwards · 4 years, 5 months ago 1.0.59
  28. faac36a Removed the "cellname delete \(UNNAMED\)" commands from the by Tim Edwards · 4 years, 5 months ago 1.0.58
  29. 281a882 Changed seal ring generator to round up widths on layouts with odd-numbered lambda by Tim Edwards · 4 years, 5 months ago
  30. c2662b9 Corrected a problem in the last commit in which an extra block of by Tim Edwards · 4 years, 5 months ago 1.0.56
  31. 363c7e0 Corrected errors related to the standard cells and the DRC rules for by Tim Edwards · 4 years, 5 months ago
  32. be6f120 Finally corrected all of the eight diode types, which had a lot of by Tim Edwards · 4 years, 5 months ago
  33. a443116 Corrected the sky130.tech file for the required tap surrounding by Tim Edwards · 4 years, 5 months ago
  34. c40fe0f Removed parameters from the ignored devices, as that is irrelevant by Tim Edwards · 4 years, 5 months ago
  35. aea401b Added handling of the 11V NPN and corrected for the problem of extracting by Tim Edwards · 4 years, 5 months ago
  36. fcec644 Added the npn_11v0 devices to the extraction types. Note that the 11V by Tim Edwards · 4 years, 5 months ago
  37. fa35ae2 Provisional additions of under-bump material and redistribution by Tim Edwards · 4 years, 5 months ago 1.0.50
  38. 859ff4b Another few follow-up corrections. by Tim Edwards · 4 years, 5 months ago
  39. e6a454b Finished pass through the DRC rule templates and fixed all of them by Tim Edwards · 4 years, 5 months ago 1.0.48
  40. 5b50e7a Corrected and updated about half of the known missing/incorrect by Tim Edwards · 4 years, 5 months ago
  41. 95effb3 Corrections in the magic techfile for the PPLUS and NPLUS auto-generated by Tim Edwards · 4 years, 5 months ago
  42. 2788f17 Corrected the Magic device generator to paint nwell under pFETs by Tim Edwards · 4 years, 5 months ago 1.0.47
  43. bb30e32 Modified the cifinput section of the magic techfile to always draw by Tim Edwards · 4 years, 6 months ago 1.0.45
  44. b1a1842 Corrected capacitor extraction (needed type "csubcircuit" and not by Tim Edwards · 4 years, 6 months ago
  45. 48db3e1 One more addition to the magic techfile, to make metal1 electrically by Tim Edwards · 4 years, 6 months ago 1.0.40
  46. d44d18d Modified the techfile to make use of a techfile extension added to by Tim Edwards · 4 years, 6 months ago
  47. 6990114 Corrected the names of the mrdp_hv and mrdn_hv devices to match the by Tim Edwards · 4 years, 6 months ago 1.0.39
  48. 42f79a3 Added resistor type short as a custom modification to the device by Tim Edwards · 4 years, 6 months ago
  49. c879cf0 Messed with the MiM cap definition before finally determining by Tim Edwards · 4 years, 6 months ago 1.0.38
  50. 28cea2f Corrected the DRC rule checking for metal1 hole area. It was not by Tim Edwards · 4 years, 6 months ago 1.0.37
  51. 3af6a1e Corrected a typo in the magic techfile. by Tim Edwards · 4 years, 6 months ago 1.0.36
  52. 3360b9e Corrected one typo in the techfile. by Tim Edwards · 4 years, 6 months ago
  53. 96c1e83 Removed a lot of locks on layers, leaving mostly just obstruction and by Tim Edwards · 4 years, 6 months ago
  54. 1021f55 Corrected the area parameter passed to the bipolar devices in the by Tim Edwards · 4 years, 6 months ago 1.0.35
  55. d7289eb Substantially revised the technology file for magic, the PDK device by Tim Edwards · 4 years, 6 months ago 1.0.34
  56. 769d362 Finished implementing the three types of 20V extended drain devices by Tim Edwards · 4 years, 7 months ago 1.0.33
  57. c5a8481 Added preliminary support for extended drain devices (reading and extraction). by Tim Edwards · 4 years, 7 months ago
  58. 862eeac Added support for bipolar transistor types (using the pwell or by Tim Edwards · 4 years, 7 months ago
  59. 88baa8e Split the cifinput section into two, because SkyWater sources have by Tim Edwards · 4 years, 7 months ago
  60. 475b527 Corrections, mostly to spectre_to_spice to handle various issues, by Tim Edwards · 4 years, 7 months ago 1.0.29
  61. 78cc9eb Started the conversion of device model names to the new naming by Tim Edwards · 4 years, 7 months ago 1.0.26
  62. 7ac1f03 Updated the magic techfile with the first draft of the completed by Tim Edwards · 4 years, 7 months ago 1.0.25
  63. bf5ec17 Corrections to the device generation script and magic techfile to by Tim Edwards · 4 years, 8 months ago
  64. eba70cf Changed "convert_spectre.py" to "spectre_to_spice.py". Corrected the script by Tim Edwards · 4 years, 8 months ago
  65. 5ebe4cf Updated the magic techfile to correct a few errors and extend the by Tim Edwards · 4 years, 8 months ago 1.0.19
  66. 0a0272b Enabled the REDISTRIBUTION option in the Makefile for sky130A. by Tim Edwards · 4 years, 8 months ago 1.0.18
  67. b4da28f Fix for naming conventions (only comments changed). by Tim Edwards · 4 years, 8 months ago 1.0.15
  68. 282d954 Modified sky130.tech magic techfile to add nwell and pwell as by Tim Edwards · 4 years, 8 months ago 1.0.9
  69. d9fe000 Corrected the Makefile, which was using the "exclude" option on the by Tim Edwards · 4 years, 8 months ago 1.0.8
  70. ba66a98 Corrected the surround rule for metal4 around via3 in the DRC and by Tim Edwards · 4 years, 8 months ago
  71. 411f5d1 Corrected sidewall values for poly through metal2, which had been by Tim Edwards · 4 years, 9 months ago
  72. a043e43 Corrected all of the parasitic capacitance values in the tables by Tim Edwards · 4 years, 9 months ago 1.0.5
  73. 5778c23 Reorganized the top level so that most working files for EDA tool setup are in by Tim Edwards · 4 years, 9 months ago[Renamed from sky130/sky130.tech]
  74. ab5bae8 Modified names in files to match the correct Google/SkyWater conventions. by Tim Edwards · 4 years, 9 months ago
  75. 55f4d0e Initial commit of public repository open_pdks. by Tim Edwards · 4 years, 9 months ago