blob: 11166772f86207b3312303ec69992cd74da00405 [file] [log] [blame]
#!/bin/tcsh
#---------------------------------------------------------------
# Shell script setting up all variables used by the qflow scripts
# for this project
#---------------------------------------------------------------
# The LEF file containing standard cell macros
#ifdef EF_FORMAT
set leffile=STAGING_PATH/TECHNAME/libs.ref/lef/LIBRARY/LIBRARY.lef
#else (!EF_FORMAT)
set leffile=STAGING_PATH/TECHNAME/libs.ref/LIBRARY/lef/LIBRARY.lef
#endif (!EF_FORMAT)
# The SPICE netlist containing subcell definitions for all the standard cells
#ifdef EF_FORMAT
set spicefile=STAGING_PATH/TECHNAME/libs.ref/spice/LIBRARY/LIBRARY.spice
#else (!EF_FORMAT)
set spicefile=STAGING_PATH/TECHNAME/libs.ref/LIBRARY/spice/LIBRARY.spice
#endif (!EF_FORMAT)
# The liberty format file containing standard cell timing and function information
#ifdef EF_FORMAT
set libertyfile=STAGING_PATH/TECHNAME/libs.ref/lib/LIBRARY/LIBRARY.lib
#else (!EF_FORMAT)
set libertyfile=STAGING_PATH/TECHNAME/libs.ref/LIBRARY/lib/LIBRARY.lib
#endif (!EF_FORMAT)
# If there is another LEF file containing technology information
# that is separate from the file containing standard cell macros,
# set this. Otherwise, leave it defined as an empty string.
#ifdef METAL5
#ifdef EF_FORMAT
set techleffile=STAGING_PATH/TECHNAME/libs.ref/techLEF/LIBRARY/LIBRARY_tech.lef
#else (!EF_FORMAT)
set techleffile=STAGING_PATH/TECHNAME/libs.ref/LIBRARY/techlef/LIBRARY.tlef
#endif (!EF_FORMAT)
#else
# NOTE: There is no technology LEF file for the 3-metal stack!
#endif
# All cells below should be the lowest output drive strength value,
# if the standard cell set has multiple cells with different drive
# strengths. Comment out any cells that do not exist.
set bufcell=BUFX2 ;# Minimum drive strength buffer cell
set bufpin_in=A ;# Name of input port to buffer cell
set bufpin_out=Y ;# Name of output port to buffer cell
set clkbufcell=BUFX2 ;# Minimum drive strength buffer cell
set clkbufpin_in=A ;# Name of input port to buffer cell
set clkbufpin_out=Y ;# Name of output port to buffer cell
set fillcell=FILL ;# Spacer (filler) cell (prefix, if more than one)
set decapcell="DECAP" ;# Decap (filler) cell (prefix, if more than one)
set antennacell="ANT" ;# Antenna (filler) cell (prefix, if more than one)
set antennapin_in="A" ;# Antenna cell input connection
set bodytiecell="" ;# Body tie (filler) cell (prefix, if more than one)
# yosys tries to eliminate use of these; depends on source .v
set tiehi="TIEHI" ;# Cell to connect to power, if one exists
set tiehipin_out="Y" ;# Output pin name of tiehi cell, if it exists
set tielo="TIELO" ;# Cell to connect to ground, if one exists
set tielopin_out="Y" ;# Output pin name of tielo cell, if it exists
set gndnet="vdd" ;# Name used for ground pins in standard cells
set vddnet="vss" ;# Name used for power pins in standard cells
set separator="" ;# Separator between gate names and drive strengths
set techfile=STAGING_PATH/TECHNAME/MAGIC_CURRENT/TECHNAME.tech ;# magic techfile
set magicrc=STAGING_PATH/TECHNAME/MAGIC_CURRENT/TECHNAME.magicrc ;# magic startup script
set magic_display="XR" ;# magic display, defeat display query and OGL preference
set netgen_setup=STAGING_PATH/TECHNAME/libs.tech/netgen/TECHNAME_setup.tcl ;# netgen setup file for LVS
#ifdef EF_FORMAT
set gdsfile=STAGING_PATH/TECHNAME/libs.ref/gds/LIBRARY/LIBRARY.gds ;# GDS database of standard cells
set verilogfile=STAGING_PATH/TECHNAME/libs.ref/verilog/LIBRARY/LIBRARY.v ;# Verilog models of standard cells
#else (!EF_FORMAT)
set gdsfile=STAGING_PATH/TECHNAME/libs.ref/LIBRARY/gds/LIBRARY.gds ;# GDS database of standard cells
set verilogfile=STAGING_PATH/TECHNAME/libs.ref/LIBRARY/verilog/LIBRARY.v ;# Verilog models of standard cells
#endif (!EF_FORMAT)
# Set a conditional default in the project_vars.sh file for this process
set postproc_options=""
#ifdef METAL5
# Normally one does not want to use the top metal for signal routing
set route_layers = 5
#else
set route_layers = 3
#endif
set fill_ratios="100,0,0,0"
set fanout_options="-l 100 -c 10"
set addspacers_options="-stripe 1.6 40.0 PG"
set xspice_options="-io_time=250p -time=50p -idelay=20p -odelay=50p -cload=250f"