)]}'
{
  "commit": "fb6f374beff316f9a8e0b5585facfc18008c0f2d",
  "tree": "1770e7432fd10f46daeec667976c1b9070ce7da9",
  "parents": [
    "e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066"
  ],
  "author": {
    "name": "Tim Edwards",
    "email": "tim@opencircuitdesign.com",
    "time": "Fri Jul 29 09:55:29 2022 -0400"
  },
  "committer": {
    "name": "Tim Edwards",
    "email": "tim@opencircuitdesign.com",
    "time": "Fri Jul 29 09:55:29 2022 -0400"
  },
  "message": "Updated VERSION after merging pull request #267.  Edited the\nasynchronous (extended-drain) devices in the netgen config file\nto change the width tolerance from 7% to 1%, since the 7% value\ngot copied up from the ESD FET devices below, where the higher\ntolerance is needed to account for the difference in interpretation\nof device width where there is a flanged gate on the device layout.\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "b87f6d814d7056e88cccf8df653ea14881c28323",
      "old_mode": 33188,
      "old_path": "VERSION",
      "new_id": "0a897c072ac59a61cf8987e6df72db688b3fb7b5",
      "new_mode": 33188,
      "new_path": "VERSION"
    },
    {
      "type": "modify",
      "old_id": "2162a3929524509073cda1520ff750cda5747ada",
      "old_mode": 33188,
      "old_path": "sky130/netgen/sky130_setup.tcl",
      "new_id": "4323a0d656062cde8e19d65534b69b5cdf62d846",
      "new_mode": 33188,
      "new_path": "sky130/netgen/sky130_setup.tcl"
    }
  ]
}