)]}'
{
  "commit": "d9fe00033574bd0d8e68d262a5631f7d8b793b31",
  "tree": "21addcafc5ec3a63fbc20fb3764a48b9a026b2ab",
  "parents": [
    "22a943e6b61497cfda0d00c9ea18a0bdd8be1f51"
  ],
  "author": {
    "name": "Tim Edwards",
    "email": "tim@opencircuitdesign.com",
    "time": "Tue Jul 14 21:53:24 2020 -0400"
  },
  "committer": {
    "name": "Tim Edwards",
    "email": "tim@opencircuitdesign.com",
    "time": "Tue Jul 14 21:53:24 2020 -0400"
  },
  "message": "Corrected the Makefile, which was using the \"exclude\" option on the\nstandard cell verilog that was supposed to be used on the standard\ncell LEF.  Mostly all this does is to change the nature of the error\nthat occurs.  Ultimately the source of the LEF files needs to be\nfixed, which will happen eventually.  Also corrected the generate()\nroutine in soc_floorplanner.  This fixes the behavior in which\nclicking on the \"Generate\" button in the floorplanner app causes\nan error.\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "238d6e882a08cec91c9bf37bd210147a0c968798",
      "old_mode": 33188,
      "old_path": "VERSION",
      "new_id": "b0f3d96f877256ed9ae03858ecc5185a989b1d1b",
      "new_mode": 33188,
      "new_path": "VERSION"
    },
    {
      "type": "modify",
      "old_id": "959a6237d96b67ee195c996311ad8a76320e2fc9",
      "old_mode": 33261,
      "old_path": "common/soc_floorplanner.py",
      "new_id": "31c6b8f2be935dcb1304b91e938fac64ebe64bc7",
      "new_mode": 33261,
      "new_path": "common/soc_floorplanner.py"
    },
    {
      "type": "modify",
      "old_id": "adcaa9a6d2402176efa63ad30102edaf940948e1",
      "old_mode": 33188,
      "old_path": "sky130/Makefile",
      "new_id": "186ff6bd652195f8afce3edb74eb28cf6ee03e94",
      "new_mode": 33188,
      "new_path": "sky130/Makefile"
    },
    {
      "type": "modify",
      "old_id": "4da410eb986bf3f003ca6c0c4380b8006e3d0211",
      "old_mode": 33188,
      "old_path": "sky130/magic/sky130.tech",
      "new_id": "1bbf87744ad918f5c479d3f0f3ea3572c3d136bb",
      "new_mode": 33188,
      "new_path": "sky130/magic/sky130.tech"
    }
  ]
}