Corrected a naming error in the magic techfile that was writing "05v0" in the device names for PNP and NPN devices instead of "05v5", resulting in a name that matches neither device models, or device names in the netgen setup file for LVS.
diff --git a/sky130/magic/sky130.tech b/sky130/magic/sky130.tech index bfc9635..85e5630 100644 --- a/sky130/magic/sky130.tech +++ b/sky130/magic/sky130.tech
@@ -63,9 +63,9 @@ # sky130_fd_pr__diode_pd2nw_05v5_lvt pdiodelvt low Vt p+ diff diode # sky130_fd_pr__diode_pd2nw_05v5_hvt pdiodehvt high Vt p+ diff diode # sky130_fd_pr__diode_pd2nw_11v0 mvpdiode thickox p+ diff diode -# sky130_fd_pr__npn_05v0 pbase NPN in deep nwell +# sky130_fd_pr__npn_05v5 pbase NPN in deep nwell # sky130_fd_pr__npn_11v0 pbase thick oxide gated NPN -# sky130_fd_pr__pnp_05v0 nbase PNP +# sky130_fd_pr__pnp_05v5 nbase PNP # sky130_fd_pr__cap_mim_m3_1 mimcap MiM cap 1st plate # sky130_fd_pr__cap_mim_m3_2 mimcap2 MiM cap 2nd plate # sky130_fd_pr__res_generic_nd rdn n+ diff resistor @@ -5286,8 +5286,8 @@ *mvnndiff nwell error l=l w=w a1=as a2=ad p1=ps p2=pd # Bipolars - device msubcircuit sky130_fd_pr__npn_05v0 npn *ndiff dnwell space/w error a2=area - device msubcircuit sky130_fd_pr__pnp_05v0 pnp *pdiff pwell,space/w a2=area + device msubcircuit sky130_fd_pr__npn_05v5 npn *ndiff dnwell space/w error a2=area + device msubcircuit sky130_fd_pr__pnp_05v5 pnp *pdiff pwell,space/w a2=area device msubcircuit sky130_fd_pr__npn_11v0 npn *mvndiff dnwell space/w error a2=area # Ignore the extended-drain FET geometry that forms part of the high-voltage