tech
    format 32
    TECHNAME-GDS
end

version
    version REVISION
    description "Google/SkyWater SKY130: Vendor GDS layers and supplementary DRC"
    requires magic-8.3.124
end

#------------------------------------------------------------------------------
# This tech file represents all GDS layers exactly in magic with no boolean
# transforms to generated layer types.  It can be used to manipulate GDS and
# is better for some DRC checks and for fill pattern generation.  However, it
# does not properly understand connectivity and cannot be used for extraction.
#------------------------------------------------------------------------------

planes
 dnwell,dw
 well,w
 implant1,i1
 implant2,i2
 implant3,i3
 implant4,i4
 implant5,i5
 implant6,i6
 implant7,i7
 implant8,i8
 active,a
 poly,p
 mcon,mc
 locali,li1,li
 licon,lc
 metal1,m1
#ifdef RERAM
 reram,rr
#endif
 via1,v1
 metal2,m2
 via2,v2
 metal3,m3
 cap1,c1
 via3,v3
 metal4,m4
 cap2,c2
 via4,v4
 metal5,m5
 glass,g
 blockd,bd
 blockp,bp
 blockl,bl
 block1,b1
 block2,b2
 block3,b3
 block4,b4
 block5,b5
 ident1,id1
 ident2,id2
 ident3,id3
 ident4,id4
 ident5,id5
 ident6,id6
 ident7,id7
 ident8,id8
 ident9,id9
 comment,c 
 error,e
end

types
 dw  DNWELL

 w   NWELL
 w   NWELLTXT
 w   NWELLPIN
 w   PWELL
 w   PWELLTXT
 w   PWELLPIN
 w   PWELLRES

 a   TAP
 a   DIFF
 a   DIFFTXT
 a   DIFFPIN
 a   DIFFRES
 a   DIFFCUT
 a   DIFFFILL

 i1  LVTN
 i1  HVTP
 i1  TUNM
 i1  NCM
 i2  THKOX
 i3  NPC
 i4  PSDM,PPLUS
 i5  NSDM,NPLUS
 i6  HVTR
 i6  RPM
 i6  URPM
 i7  LDNTM
 i8  HVNTM

 p   POLY
 p   POLYPIN
 p   POLYTXT
 p   POLYRES
 p   POLYMOD
 p   POLYCUT
 p   POLYGATE
 p   POLYFILL
 p   POLYSHORT

 mc  MCON

 li  LI1,LI
 li  LI1TXT,LITXT
 li  LI1PIN,LIPIN
 li  LI1RES,LIRES
 li  LI1FILL,LIFILL
 li  LI1SHORT,LISHORT

 lc  LICON1,LICON

 m1  MET1
 m1  MET1TXT
 m1  MET1PIN
 m1  MET1RES
 m1  MET1FILL
 m1  MET1SHORT

 v1  VIA1
#ifdef RERAM
#undef RERAM
 rr  RERAM
#define RERAM 1
#endif

 m2  MET2
 m2  MET2TXT
 m2  MET2PIN
 m2  MET2RES
 m2  MET2FILL
 m2  MET2SHORT

 v2  VIA2

 m3  MET3
 m3  MET3TXT
 m3  MET3PIN
 m3  MET3RES
 m3  MET3FILL
 m3  MET3SHORT

 c1  CAPM
 v3  VIA3

 m4  MET4
 m4  MET4TXT
 m4  MET4PIN
 m4  MET4RES
 m4  MET4FILL
 m4  MET4SHORT

 c2  CAPM2,CAP2M
 v4  VIA4

 m5  MET5
 m5  MET5TXT
 m5  MET5PIN
 m5  MET5RES
 m5  MET5FILL
 m5  MET5SHORT

 g   PAD
 g   PADTXT
 g   PADPIN

 id1 SUBCUT
 id2 COREID
 id2 HVNWELLID
 id3 STDCELLID
 id4 ESDID
 id5 BOUND
 id5 BOUND2
 id6 PNPID,PNP
 id6 NPNID,NPN
 id6 DIODEID,DIODE
 id6 PHOTOID,PHOTO
 id6 SEALID,SEAL
 id6 PADDIFFID
 id6 LVID,LOWVOLTAGE
 id7 INDID,IND
 id7 EDID,EXTDRAINID
 id7 CAPID,CAP
 id7 PADMETALID
 id8 LOWTAPDENSITY
 id8 PADCENTERID
 id8 OUTLINE
 id9 V5
 id9 V12
 id9 V20

 bd  DIFFBLOCK
 bp  POLYBLOCK
 bl  LIBLOCK
 b1  MET1BLOCK
 b2  MET2BLOCK
 b3  MET3BLOCK
 b4  MET4BLOCK
 b5  MET5BLOCK

 bp CP1MADD
 bp CP1MDROP
 bd CFOMDROP
 bl CLI1MADD
 bl CLI1MDROP
 id7 CNTMADD

 c   TEXT
 c   LVSTEXT
 c   COMMENT
 c   UNKNOWN1
 c   UNKNOWN2
 c   UNKNOWN3

 e   ERROR

end

contact
end

aliases
 ALLNWELL  NWELL,NWELLTXT,NWELLPIN
 ALLPWELL  PWELL,PWELLTXT,PWELLPIN,PWELLRES
 ALLDIFF  TAP,DIFF,DIFFTXT,DIFFPIN,DIFFRES,DIFFCUT
 ALLPOLY  POLY,POLYTXT,POLYPIN,POLYRES,POLYMOD,POLYCUT,POLYGATE
 ALLLI  LI1,LI1TXT,LI1PIN,LI1RES
 ALLM1  MET1,MET1TXT,MET1PIN,MET1RES
 ALLM2  MET2,MET2TXT,MET2PIN,MET2RES
 ALLM3  MET3,MET3TXT,MET3PIN,MET3RES
 ALLM4  MET4,MET4TXT,MET4PIN,MET4RES
 ALLM5  MET5,MET5TXT,MET5PIN,MET5RES
 ALLPAD PAD,PADTXT,PADPIN
end

styles
 styletype	mos

 NWELL    nwell
 NWELLTXT nwell
 NWELLPIN nwell
 PWELL    pwell
 PWELLTXT pwell
 PWELLPIN pwell
 PWELLRES pwell poly_resist_stripes
 DNWELL   cwell
 TAP      pdiffusion
 DIFF     ndiffusion
 DIFFTXT  ndiffusion
 DIFFPIN  ndiffusion
 DIFFFILL ndiffusion
 DIFFCUT  ndiffusion
 DIFFRES  ndiffusion poly_resist_stripes
 BOUND    subcircuit
 BOUND2   subcircuit
 OUTLINE  subcircuit
 POLY     polysilicon
 POLYTXT   polysilicon
 POLYPIN   polysilicon
 POLYRES   poly_resist poly_resist_stripes
 POLYCUT   polysilicon
 POLYSHORT polysilicon
 POLYFILL polysilicon
 POLYGATE polysilicon
 POLYMOD  polysilicon
 PSDM   pdop_stripes
 NSDM   ndop_stripes
 MCON	contact_X'es
 LI1      metal1
 LI1TXT   metal1
 LI1PIN   metal1
 LI1FILL  metal1
 LI1RES   metal1 poly_resist_stripes
 LI1SHORT metal1
 LICON   metal1 metal2 via1
 MET1   metal2
 MET1TXT   metal2
 MET1PIN   metal2
 MET1FILL  metal2
 MET1RES   metal2 poly_resist_stripes
 MET1SHORT metal2
 VIA1   metal2 metal3 via2
 MET2   metal3
 MET2TXT   metal3
 MET2PIN   metal3
 MET2FILL  metal3
 MET2RES   metal3 poly_resist_stripes
 MET2SHORT metal3
 VIA2   metal3 metal4 via3
 MET3   metal4
 MET3TXT   metal4
 MET3PIN   metal4
 MET3FILL  metal4
 MET3RES   metal4 poly_resist_stripes
 MET3SHORT metal4
 CAPM     mim_top
 VIA3   metal4 metal5 via4
 MET4   metal5
 MET4TXT   metal5
 MET4PIN   metal5
 MET4FILL  metal5
 MET4SHORT metal5
 MET4RES   metal5 poly_resist_stripes
 CAP2M    mim_bottom
 VIA4   metal5 metal6 via5
 MET5   metal6
 MET5TXT   metal6
 MET5PIN   metal6
 MET5FILL  metal6
 MET5RES   metal6 poly_resist_stripes
 MET5SHORT metal6
 PAD   overglass
 PADTXT   overglass
 PADPIN   overglass
 THKOX    implant1
 NPC      implant2
 RPM      implant3
 URPM	  implant3
 LVTN     implant4
 LVTN	  implant1
 HVTP	  implant2
 TUNM	  implant3
 NCM	  implant4
 V5	  subcircuit
 V12	  subcircuit
 V20	  subcircuit
 HVTR	  implant1
 LDNTM	  implant2
 HVNTM	  implant3
 SUBCUT	  subcircuit
 STDCELLID subcircuit
 DIFFBLOCK poly_resist_stripes
 POLYBLOCK poly_resist_stripes
 LIBLOCK   poly_resist_stripes
 MET1BLOCK poly_resist_stripes
 MET2BLOCK poly_resist_stripes
 MET3BLOCK poly_resist_stripes
 MET4BLOCK poly_resist_stripes
 MET5BLOCK poly_resist_stripes
 TEXT	  electrode
 LVSTEXT  electrode
 COMMENT	comment
 ERROR		error_waffle
 error_p	error_waffle
 error_s	error_waffle
 error_ps	error_waffle
end

compose
end

connect
  # This is a very primitive connection table, and may not be useful.
  # It does not correctly handle ReRAM or MiM caps.
  DIFF MCON
  TAP  MCON
  POLY MCON
  MCON LI1
  LI1  LICON
  LICON MET1
  MET1 VIA1
  VIA1 MET2
  MET2 VIA2
  VIA2 MET3
  MET3 VIA3
  VIA3 MET4
  MET4 VIA4
  VIA4 MET5
end

cifoutput
style sky130 variants (),(altfill)
  scalefactor 10 nanometers
  options calma-permissive-labels
  gridlimit 1

 layer  NWELL ALLNWELL
 calma 64 20

 layer NWELLTXT
 labels NWELLTXT noport
 calma 64 16

 layer NWELLPIN
 labels NWELLPIN port
 calma 64 5

 layer PWELL PWELL
 labels PWELL
 calma 81 53

 layer PWELLTXT PWELLTXT
 labels PWELLTXT noport
 calma 122 16

 layer PWELLPIN PWELLPIN
 labels PWELLPIN port
 calma 64 59

 layer  DNWELL DNWELL
 labels DNWELL 
 calma 64 18

 layer  DIFF DIFF
 labels DIFF 
 calma 65 20

 layer  DIFFTXT
 labels DIFFTXT noport
 calma  65 6

 layer  DIFFPIN
 labels DIFFPIN noport
 calma  65 16

 layer DIFFRES DIFFRES
 labels DIFFRES
 calma 65 13

 layer DIFFCUT DIFFCUT
 labels DIFFCUT
 calma 65 14

 layer  TAP TAP
 labels TAP 
 calma 65 44

 layer  POLY ALLPOLY
 calma 66 20

 layer POLYTTXT
 labels POLYTXT noport
 calma 66 16

 layer POLYPIN
 labels POLYPIN port
 calma 66 5

 layer POLYCUT POLYCUT
 labels POLYCUT
 calma 66 14

 layer POLYGATE POLYGATE
 labels POLYGATE
 calma 66 9

 layer POLYMOD POLYMOD
 labels POLYMOD
 calma 66 83

 layer POLYSHORT POLYSHORT
 labels POLYSHORT
 calma 66 15

 layer  LVTN LVTN
 labels LVTN 
 calma 125 44

 layer  HVTP HVTP
 labels HVTP 
 calma 78 44

 layer  HVI THKOX
 labels  THKOX
 calma 75 20

 layer  TUNM TUNM
 labels TUNM 
 calma 80 20

 layer  NPC NPC
 labels NPC 
 calma 95 20

 layer  NCM NCM
 labels NCM
 calma 92 44

 layer  PSDM PSDM
 labels PSDM 
 calma 94 20

 layer  NSDM NSDM
 labels NSDM 
 calma 93 44

 layer  LICON1 LICON1
 labels LICON1 
 calma 66 44

 layer  LI1 ALLLI
 calma 67 20

 layer  LI1TXT
 labels LI1TXT noport
 calma 67 16

 layer  LI1PIN
 labels LI1PIN port
 calma 67 5

 layer  MET1 ALLM1
 calma 68 20

 layer  MET1TXT
 labels MET1TXT noport
 calma 68 16

 layer  MET1PIN
 labels MET1PIN port
 calma 68 5

 layer  MCON MCON
 labels MCON 
 calma 67 44

 layer  MET2 ALLM2
 calma 69 20

 layer  MET2TXT
 labels MET2TXT noport
 calma 69 16

 layer  MET2PIN
 labels MET2PIN port
 calma 69 5

 layer  VIA1 VIA1
 labels VIA1 
 calma 68 44

#ifdef RERAM
#undef RERAM
 layer  RERAM RERAM
 labels RERAM
 calma 201 20
#define RERAM 1
#endif

 layer  MET3 ALLM3
 calma 70 20

 layer  MET3TXT
 labels MET3TXT noport
 calma 70 16

 layer  MET3PIN
 labels MET3PIN port
 calma 70 5

 layer  VIA2 VIA2
 labels VIA2 
 calma 69 44

 layer  CAPM CAPM
 labels CAPM
 calma 89 44

 layer  MET4 ALLM4
 calma 71 20

 layer  MET4TXT
 labels MET4TXT noport
 calma 71 16

 layer  MET4PIN
 labels MET4PIN port
 calma 71 5

 layer  VIA3 VIA3
 labels VIA3 
 calma 70 44

 layer  CAP2M CAP2M
 labels CAP2M
 calma 97 44

 layer  MET5 ALLM5
 calma 72 20

 layer  MET5TXT
 labels MET5TXT noport
 calma 72 16

 layer  MET5PIN
 labels MET5PIN port
 calma 72 5

 layer  VIA4 VIA4
 labels VIA4 
 calma 71 44

 layer  PAD ALLPAD
 calma 76 20

 layer  PADTXT
 labels PADTXT noport
 calma 76 16

 layer  PADPIN
 labels PADPIN port
 calma 76 5

 layer  STDCELLID STDCELLID
 labels STDCELLID
 calma 81 4

 layer  TEXT TEXT
 labels TEXT
 calma 83 44

 layer HVTR HVTR
 labels HVTR
 calma 18 20

 layer RPM RPM
 labels RPM
 calma 86 20

 layer URPM URPM
 labels URPM
 calma 79 20

 layer LDNTM LDNTM
 labels LDNTM
 calma 11 44

 layer HVNTM HVNTM
 labels HVNTM
 calma 125 20

 layer PNP PNP
 labels PNP
 calma 82 44

 layer NPN NPN
 labels NPN
 calma 82 20

 layer CAP CAP
 labels CAP
 calma 82 64

 layer IND IND
 labels IND
 calma 82 24

 layer LVID LVID
 labels LVID
 calma 81 60

 layer CP1MADD CP1MADD
 labels CP1MADD
 calma 33 43 

 layer CP1MDROP CP1MDROP
 labels CP1MDROP
 calma 33 42 

 layer CFOMDROP CFOMDROP
 labels CFOMDROP
 calma 22 22

 layer CLI1MADD CLI1MADD
 labels CLI1MADD
 calma 115 43

 layer CLI1MDROP CLI1MDROP
 labels CLI1MDROP
 calma 115 42

 layer CNTMADD CNTMADD
 labels CNTMADD
 calma 22 21

 layer PWELLRES PWELLRES
 labels PWELLRES
 calma 64 13

 layer POLYRES POLYRES
 labels POLYRES
 calma 66 13

 layer DIODE DIODE
 labels DIODE
 calma 81 23

 layer COREID COREID
 labels COREID
 calma 81 2

 # Is BOUND2 preferable here?
 layer BOUND BOUND
 labels BOUND
 calma 235 4

 layer BOUND2 BOUND2
 labels BOUND2
 calma 235 0

 layer OUTLINE OUTLINE
 labels OUTLINE
 calma 236 0

 layer ESDID ESDID
 labels ESDID
 calma 81 19

 layer UNKNOWN1 UNKNOWN1
 labels UNKNOWN1
 calma 230 241

 layer UNKNOWN2 UNKNOWN2
 labels UNKNOWN2
 calma 230 242

 layer UNKNOWN3 UNKNOWN3
 labels UNKNOWN3
 calma 64 44

 variants ()

 layer DIFFFILL DIFFFILL
 labels DIFFFILL
 calma 23 28

 layer POLYFILL POLYFILL
 labels POLYFILL
 calma 28 28

 layer LI1FILL LI1FILL
 labels LI1FILL
 calma 56 28

 layer MET1FILL MET1FILL
 labels MET1FILL
 calma 36 28

 layer MET2FILL MET2FILL
 labels MET2FILL
 calma 41 28

 layer MET3FILL MET3FILL
 labels MET3FILL
 calma 34 28

 layer MET4FILL MET4FILL
 labels MET4FILL
 calma 51 28

 layer MET5FILL MET5FILL
 labels MET5FILL
 calma 59 28

 layer DIFFBLOCK DIFFBLOCK
 labels DIFFBLOCK
 calma 22 24

 layer POLYBLOCK POLYBLOCK
 labels POLYBLOCK
 calma 33 24

 layer MET1BLOCK MET1BLOCK
 labels MET1BLOCK
 calma 62 24

 layer MET2BLOCK MET2BLOCK
 labels MET2BLOCK
 calma 105 52

 layer MET3BLOCK MET3BLOCK
 labels MET3BLOCK
 calma 107 24

 layer MET4BLOCK MET4BLOCK
 labels MET4BLOCK
 calma 112 4

 layer MET5BLOCK MET5BLOCK
 labels MET5BLOCK
 calma 117 4

 variants (altfill)

 layer DIFFFILL DIFFFILL
 labels DIFFFILL
 calma 65 99

 layer POLYFILL POLYFILL
 labels POLYFILL
 calma 66 99

 layer LI1FILL LI1FILL
 labels LI1FILL
 calma 67 99

 layer MET1FILL MET1FILL
 labels MET1FILL
 calma 68 99

 layer MET2FILL MET2FILL
 labels MET2FILL
 calma 69 99

 layer MET3FILL MET3FILL
 labels MET3FILL
 calma 70 99

 layer MET4FILL MET4FILL
 labels MET4FILL
 calma 71 99

 layer MET5FILL MET5FILL
 labels MET5FILL
 calma 72 99

 layer DIFFBLOCK DIFFBLOCK
 labels DIFFBLOCK
 calma 65 98

 layer POLYBLOCK POLYBLOCK
 labels POLYBLOCK
 calma 67 98

 layer MET1BLOCK MET1BLOCK
 labels MET1BLOCK
 calma 68 98

 layer MET2BLOCK MET2BLOCK
 labels MET2BLOCK
 calma 69 98

 layer MET3BLOCK MET3BLOCK
 labels MET3BLOCK
 calma 70 98

 layer MET4BLOCK MET4BLOCK
 labels MET4BLOCK
 calma 71 98

 layer MET5BLOCK MET5BLOCK
 labels MET5BLOCK
 calma 72 98

 variants *

 layer  LISHORT LISHORT
 labels LISHORT
 calma 67 15

 layer  MET1SHORT MET1SHORT
 labels MET1SHORT
 calma 68 15

 layer  MET2SHORT MET2SHORT
 labels MET2SHORT
 calma 69 15

 layer  MET3SHORT MET3SHORT
 labels MET3SHORT
 calma 70 15

 layer  MET4SHORT MET4SHORT
 labels MET4SHORT
 calma 71 15

 layer  MET5SHORT MET5SHORT
 labels MET5SHORT
 calma 72 15

 layer  MET1RES MET1RES
 labels MET1RES
 calma 68 13

 layer  MET2RES MET2RES
 labels MET2RES
 calma 69 13

 layer  MET3RES MET3RES
 labels MET3RES
 calma 70 13

 layer  MET4RES MET4RES
 labels MET4RES
 calma 71 13

 layer  MET5RES MET5RES
 labels MET5RES
 calma 72 13

#----------------------------------------------------------------
style wafflefill variants (),(tiled)
#----------------------------------------------------------------
# Style used by scripts for automatically generating fill layers
# NOTE: Be sure to generate output on flattened layout.
#----------------------------------------------------------------
 scalefactor 10  nanometers
 options calma-permissive-labels
 gridlimit 5

#----------------------------------------------------------------
# Generate and retain a layer representing the bounding box.
#
# For variant ():
# The bounding box is the full extent of geometry on the top level
# cell.
#
# For variant (tiled):
# Use with a script that breaks layout into flattened tiles and runs
# fill individually on each.  The tiles should be larger than the
# step size, and each should draw a layer "COMMENT" the size of the
# step box.
#----------------------------------------------------------------

 variants ()
     templayer	topbox
	 bbox	top

 variants (tiled)
     templayer	topbox COMMENT
	 # Each tile imposes the full keepout distance rule of
	 # 3um on all sides.
	 shrink 1500

 variants *

#----------------------------------------------------------------
# Generate guard-band around nwells to keep FOM from crossing
# Spacing from LV nwell = Diff/Tap 9 = 0.34um
# Spacing from HV nwell = Diff/Tap 18 = 0.43um (= 0.18 + 0.25)
# Enclosure by nwell = Diff/Tap 8 = 0.18um
#----------------------------------------------------------------

 templayer alldiffmv ALLDIFF
	and THKOX
	
 templayer mvnwell
 	bloat-all alldiffmv ALLNWELL

 templayer lvnwell ALLNWELL
	and-not mvnwell

 templayer	well_shrink mvnwell
	shrink 	250
	or lvnwell
	shrink	180

 templayer	well_guardband ALLNWELL
	grow	340
	and-not	well_shrink

# Generate guard-band around THKOX edge to keep FOM from crossing
# spacing from THKOX to diff 0.18um

 templayer	hvi_shrink THKOX
	shrink	180

 templayer	hvi_guardband THKOX
	grow	180
	and-not	hvi_shrink

#---------------------------------------------------
# Diffusion and poly keep-out areas
#---------------------------------------------------
 templayer      obstruct_fom ALLDIFF,ALLPOLY,DIFFFILL,POLYFILL,DIFFBLOCK,POLYBLOCK
	or	PWELLRES,PNP,NPN
        grow    500
	or	well_guardband,hvi_guardband,NSDM,PSDM

 templayer      obstruct_poly ALLDIFF,ALLPOLY,DIFFFILL,POLYFILL,DIFFBLOCK,POLYBLOCK
	or	PWELLRES,PNP,NPN
	grow	1000
	or	NSDM,PSDM

#---------------------------------------------------
# FOM and POLY fill
#---------------------------------------------------
 templayer	fomfill_pass1 topbox
        slots   0 4080 1600 0 4080 1600 1360 0
        and-not obstruct_fom
	and	topbox
	orthogonal remove
        shrink  2035
        grow    2035

#---------------------------------------------------

 templayer      obstruct_poly_pass1 fomfill_pass1
        grow    300
	or	obstruct_poly
 templayer	polyfill_pass1 topbox
        slots   0 720 360 0 720 360 240 0
        and-not obstruct_poly_pass1
	and	topbox
	orthogonal remove
        shrink  355
        grow    355

#---------------------------------------------------

 templayer      obstruct_fom_pass2 fomfill_pass1
        grow    1290
	or	polyfill_pass1
        grow    300
	or	obstruct_fom
 templayer	fomfill_pass2 topbox
        slots   0 2500 1320 0 2500 1320 1360 0
        and-not obstruct_fom_pass2
	and	topbox
	orthogonal remove
        shrink  1245
        grow    1245

#---------------------------------------------------

 templayer      obstruct_poly_coarse polyfill_pass1
	grow	60
	or	fomfill_pass1,fomfill_pass2
	grow	300
	or	obstruct_poly
 templayer	polyfill_coarse topbox
        slots   0 720 360 0 720 360 240 120
        and-not obstruct_poly_coarse
	and	topbox
	orthogonal remove
        shrink  355
        grow    355

#---------------------------------------------------
 templayer      obstruct_poly_medium polyfill_pass1,polyfill_coarse
	grow	60
	or	fomfill_pass1,fomfill_pass2
        grow    300
	or	obstruct_poly
 templayer	polyfill_medium topbox
        slots   0 540 360 0 540 360 240 100
        and-not obstruct_poly_medium
	and	topbox
	orthogonal remove
        shrink  265
        grow    265

#---------------------------------------------------
 templayer      obstruct_poly_fine polyfill_pass1,polyfill_coarse,polyfill_medium
	grow	60
	or	fomfill_pass1,fomfill_pass2
	grow	300
	or	obstruct_poly
 templayer	polyfill_fine topbox
        slots   0 480 360 0 480 360 240 200
        and-not obstruct_poly_fine
	and	topbox
	orthogonal remove
        shrink  235
        grow    235

#---------------------------------------------------

 templayer      obstruct_fom_coarse fomfill_pass1,fomfill_pass2
        grow    1290
	or	polyfill_pass1,polyfill_coarse,polyfill_medium,polyfill_fine
	grow	300
	or	obstruct_fom
 templayer	fomfill_coarse topbox
        slots   0 1500 1320 0 1500 1320 1360 0
        and-not obstruct_fom_coarse
	and	topbox
	orthogonal remove
        shrink  745
        grow    745

#---------------------------------------------------

 templayer      obstruct_fom_fine fomfill_pass1,fomfill_pass2,fomfill_coarse
        grow    1290
	or	polyfill_pass1,polyfill_coarse,polyfill_medium,polyfill_fine
	grow	300
	or	obstruct_fom
 templayer	fomfill_fine topbox
        slots   0 500 400 0 500 400 160 0
        and-not obstruct_fom_fine
	and	topbox
	orthogonal remove
        shrink  245
        grow    245

#---------------------------------------------------
 layer  FOMFILL fomfill_pass1 
	or	fomfill_pass2
	or	fomfill_coarse
	or	fomfill_fine
 	# calma 	23 28
 	calma 65 99

 layer	POLYFILL polyfill_pass1 
	or	 polyfill_coarse
	or	 polyfill_medium
	or	 polyfill_fine
 	# calma 	28 28
	calma 66 99

#---------------------------------------------------------
# LI fill
# Note requirement that LI fill may not overlap (non-fill)
# diff or poly.
#
# Important note:  sky130 does not define an LI mask fill
# blockage layer, because LI fill requirements were added
# to the process after the open PDK was made.  While
# obstruction layers can be used in magic to block LI
# fill, this does not translate into GDS, so running fill
# on a GDS top level cell will result in LI fill shapes
# being placed in the corner and under the seal ring.  To
# work around this, I have added obsm1 to the layers that
# obstruct LI, which is a bit of a hack but should not
# cause issues in practice.
#---------------------------------------------------------

 templayer      obstruct_li_coarse ALLLI,LI1FILL,LIBLOCK
        grow    2800
	or	ALLDIFF,ALLPOLY
	grow	200
	or	MET1BLOCK
 templayer	lifill_coarse topbox
        # slots   0 3000 650 0 3000 650 700 0
        slots   0 3000 900 0 3000 900 700 0
        and-not obstruct_li_coarse
	and	topbox
	orthogonal remove
        shrink  1495
        grow    1495

 templayer      obstruct_li_medium ALLLI,LI1FILL,LIBLOCK
        grow    2500
	or	lifill_coarse
	grow	300
	or	ALLDIFF,ALLPOLY
        grow    200
	or	MET1BLOCK
 templayer	lifill_medium topbox
        slots   0 1500 500 0 1500 500 700 0
        and-not obstruct_li_medium
	and	topbox
	orthogonal remove
        shrink  745
        grow    745

 templayer      obstruct_li_fine ALLLI,LI1FILL,LIBLOCK
	or	lifill_coarse,lifill_medium
	grow	300
	or	ALLDIFF,ALLPOLY
        grow    200
	or	MET1BLOCK
 templayer	lifill_fine topbox
        slots   0 580 500 0 580 500 700 0
        and-not obstruct_li_fine
	and	topbox
	orthogonal remove
        shrink  285
        grow    285

 layer	LIFILL  lifill_coarse
	or	lifill_medium
	or	lifill_fine
 	# calma 	56 28
	calma 67 99

#---------------------------------------------------
# MET1 fill
#---------------------------------------------------

 templayer      obstruct_m1_coarse ALLM1,PAD,MET1FILL,MET1BLOCK
        grow    3000
 templayer	met1fill_coarse topbox
        # slots   0 2000 200 0 2000 200 700 0
        slots   0 2000 800 0 2000 800 700 350
        and-not obstruct_m1_coarse
	and	topbox
	orthogonal remove
        shrink  995
        grow    995

 templayer      obstruct_m1_medium ALLM1,PAD,MET1FILL,MET1BLOCK
        grow    2800
	or	met1fill_coarse
        grow    200
 templayer	met1fill_medium topbox
        slots   0 1000 200 0 1000 200 700 0
        and-not obstruct_m1_medium
	and	topbox
	orthogonal remove
        shrink  495
        grow    495

 templayer      obstruct_m1_fine ALLM1,PAD,MET1FILL,MET1BLOCK
        grow    300
	or	met1fill_coarse,met1fill_medium
        grow    200
 templayer	met1fill_fine topbox
        slots   0 580 200 0 580 200 700 0
        and-not obstruct_m1_fine
	and	topbox
	orthogonal remove
        shrink  285
        grow    285

 templayer      obstruct_m1_veryfine ALLM1,PAD,MET1FILL,MET1BLOCK
        grow    100
	or	met1fill_coarse,met1fill_medium,met1fill_fine
        grow    200
 templayer	met1fill_veryfine topbox
        slots   0 300 200 0 300 200 100 50
        and-not obstruct_m1_veryfine
	and	topbox
	orthogonal remove
        shrink  145
        grow    145

 layer	MET1FILL met1fill_coarse
	or	met1fill_medium
	or	met1fill_fine
	or	met1fill_veryfine
 	# calma 	36 28
 	calma 	68 99

#---------------------------------------------------
# MET2 fill
#---------------------------------------------------
 templayer      obstruct_m2 ALLM2,PAD,MET2FILL,MET2BLOCK
        grow    3000
 templayer	met2fill_coarse topbox
        # slots   0 2000 200 0 2000 200 700 350
        slots   0 2000 800 0 2000 800 700 350
        and-not obstruct_m2
	and	topbox
	orthogonal remove
        shrink  995
        grow    995

 templayer      obstruct_m2_medium ALLM2,PAD,MET2FILL,MET2BLOCK
        grow    2800
	or	met2fill_coarse
        grow    200
 templayer	met2fill_medium topbox
        slots   0 1000 200 0 1000 200 700 350
        and-not obstruct_m2_medium
	and	topbox
	orthogonal remove
        shrink  495
        grow    495

 templayer      obstruct_m2_fine ALLM2,PAD,MET2FILL,MET2BLOCK
        grow    300
	or	met2fill_coarse,met2fill_medium
        grow    200
 templayer	met2fill_fine topbox
        slots   0 580 200 0 580 200 700 350
        and-not obstruct_m2_fine
	and	topbox
	orthogonal remove
        shrink  285
        grow    285

 templayer      obstruct_m2_veryfine ALLM2,PAD,MET2FILL,MET2BLOCK
        grow    100
	or	met2fill_coarse,met2fill_medium,met2fill_fine
        grow    200
 templayer	met2fill_veryfine topbox
        slots   0 300 200 0 300 200 100 100
        and-not obstruct_m2_veryfine
	and	topbox
	orthogonal remove
        shrink  145
        grow    145

 layer	MET2FILL met2fill_coarse
	or met2fill_medium
	or met2fill_fine
	or met2fill_veryfine
 	# calma 	41 28
 	calma 69 99

#---------------------------------------------------
# MET3 fill
#---------------------------------------------------
 templayer      obstruct_m3 ALLM3,PAD,MET3FILL,MET3BLOCK
        grow    3000
 templayer	met3fill_coarse topbox
        # slots   0 2000 300 0 2000 300 700 700
        slots   0 2000 800 0 2000 800 700 350
        and-not obstruct_m3
	and	topbox
	orthogonal remove
        shrink  995
        grow    995

 templayer      obstruct_m3_medium ALLM3,PAD,MET3FILL,MET3BLOCK
        grow    2700
	or	met3fill_coarse
        grow    300
 templayer	met3fill_medium topbox
        slots   0 1000 300 0 1000 300 700 700
        and-not obstruct_m3_medium
	and	topbox
	orthogonal remove
        shrink  495
        grow    495

 templayer      obstruct_m3_fine CAPM
	grow	840
	or	ALLM3,PAD,MET3FILL,MET3BLOCK
        grow    200
	or	met3fill_coarse,met3fill_medium
        grow    300
 templayer	met3fill_fine topbox
        slots   0 580 300 0 580 300 700 700
        and-not obstruct_m3_fine
	and	topbox
	orthogonal remove
        shrink  285
        grow    285

 templayer      obstruct_m3_veryfine CAPM
	grow	940
	or	ALLM3,PAD,MET3FILL,MET3BLOCK
	# Note: Adding 0.1 to waffle rule to clear wide spacing rule
        grow    100
	or	met3fill_coarse,met3fill_medium,met3fill_fine
        grow    300
 templayer	met3fill_veryfine topbox
        slots   0 500 300 0 500 300 150 200
        and-not obstruct_m3_veryfine
	and	topbox
	orthogonal remove
        shrink  245
        grow    245

 layer	MET3FILL met3fill_coarse
	or	met3fill_medium
	or	met3fill_fine
	or	met3fill_veryfine
 	# calma 	34 28
 	calma 70 99

#---------------------------------------------------
# MET4 fill
#---------------------------------------------------
 templayer      obstruct_m4 PAD
	grow	2500
 	or	ALLM4,MET4FILL,MET4BLOCK
        grow    3000
 templayer	met4fill_coarse topbox
        # slots   0 2000 300 0 2000 300 700 1050
        slots   0 2000 800 0 2000 800 700 350
        and-not obstruct_m4
	and	topbox
	orthogonal remove
        shrink  995
        grow    995

 templayer	obstruct_m4_medium PAD
	grow	2500
	or	ALLM4,MET4FILL,MET4BLOCK
        grow    2700
	or	met4fill_coarse
        grow    300
 templayer	met4fill_medium topbox
        slots   0 1000 300 0 1000 300 700 1050
        and-not obstruct_m4_medium
	and	topbox
	orthogonal remove
        shrink  495
        grow    495

 templayer      obstruct_m4_fine PAD
	grow	4160
	or	CAPM2
	grow	840
 	or	ALLM4,MET4FILL,MET4BLOCK
        grow    200
	or	met4fill_coarse,met4fill_medium
        grow    300
 templayer	met4fill_fine topbox
        slots   0 580 300 0 580 300 700 1050
        and-not obstruct_m4_fine
	and	topbox
	orthogonal remove
        shrink  285
        grow    285

 templayer      obstruct_m4_veryfine PAD
	grow	4160
	or	CAPM2
	grow	940
	or	ALLM4,MET4FILL,MET4BLOCK
	# Note: Adding 0.1 to waffle rule to clear wide spacing rule
        grow    100
	or	met4fill_coarse,met4fill_medium,met4fill_fine
        grow    300
 templayer	met4fill_veryfine topbox
        slots   0 500 300 0 500 300 150 300
        and-not obstruct_m4_veryfine
	and	topbox
	orthogonal remove
        shrink  245
        grow    245

 layer	MET4FILL met4fill_coarse
	or	met4fill_medium
	or	met4fill_fine
	or	met4fill_veryfine
 	# calma 	51 28
	calma 71 99

#---------------------------------------------------
# MET5 fill
#---------------------------------------------------
 templayer      obstruct_m5 ALLM5,PAD,MET5FILL,MET5BLOCK
        grow    3000
 templayer	met5fill_coarse topbox
        slots   0 5000 1600 0 5000 1600 1000 100
        and-not obstruct_m5
	and	topbox
	orthogonal remove
        shrink  2495
        grow    2495

 templayer      obstruct_m5_medium ALLM5,PAD,MET5FILL,MET5BLOCK
        grow    1400
	or	met5fill_coarse
        grow    1600
 templayer	met5fill_medium topbox
        slots   0 3000 1600 0 3000 1600 1000 100
        and-not obstruct_m5_medium
	and	topbox
	orthogonal remove
        shrink  1495
        grow    1495

 layer	MET5FILL met5fill_coarse
	or	met5fill_medium
 	# calma 	59 28
	calma 72 99
end

cifinput
style sky130
 scalefactor 10 nanometers
 layer DNWELL  DNWELL

 layer NWELL  NWELL,NWELLTXT,NWELLPIN
 labels NWELL
 labels NWELLPIN port
 labels NWELLTXT text

 layer PWELL  PWELL,PWELLTXT,PWELLPIN
 labels PWELL
 labels PWELLPIN port
 labels PWELLTXT text

 layer LVTN  LVTN
 layer HVTP  HVTP
 layer THKOX HVI
 layer TUNM  TUNM

 layer DIFF  DIFF,TAP,DIFFTXT,DIFFPIN
 labels DIFF
 labels DIFFPIN port
 labels DIFFTXT text

 layer DIFFCUT DIFFCUT
 layer DIFFRES DIFFRES
 layer DIFFFILL DIFFFILL,ALTDIFFFILL
 layer DIFFBLOCK DIFFBLOCK,ALTDIFFBLOCK

 layer POLY  POLY,POLYTXT,POLYPIN
 labels POLY
 labels POLYPIN port
 labels POLYTXT text

 layer POLYMOD POLYMOD
 layer POLYRES POLYRES
 layer POLYCUT POLYCUT
 layer POLYGATE POLYGATE
 layer POLYFILL POLYFILL,ALTPOLYFILL
 layer POLYBLOCK POLYBLOCK,ALTPOLYBLOCK
 layer POLYSHORT POLYSHORT

 layer NPC NPC
 layer NCM NCM
 layer PSDM PSDM
 layer NSDM NSDM

 layer LICON LICON1

 layer LI1 LI1,LI1TXT,LI1PIN
 labels LI1
 labels LI1PIN port
 labels LI1TXT text

 layer LI1RES LI1RES
 layer LI1FILL LI1FILL,ALTLI1FILL
 layer LIBLOCK LIBLOCK,ALTLIBLOCK,OLDLIBLOCK
 layer LISHORT LISHORT

 layer MCON MCON

 layer MET1 MET1,MET1TXT,MET1PIN
 labels MET1
 labels MET1PIN port
 labels MET1TXT text

 layer MET1RES MET1RES
 layer MET1FILL MET1FILL,ALTMET1FILL
 layer MET1BLOCK MET1BLOCK,ALTMET1BLOCK,OLDMET1BLOCK
 layer MET1SHORT MET1SHORT

 layer VIA1 VIA1

 layer MET2 MET2,MET2TXT,MET2PIN
 labels MET2
 labels MET2PIN port
 labels MET2TXT text

 layer MET2RES MET2RES
 layer MET2FILL MET2FILL,ALTMET2FILL
 layer MET2BLOCK MET2BLOCK,ALTMET2BLOCK,OLDMET2BLOCK
 layer MET2SHORT MET2SHORT

 layer VIA2 VIA2

 layer MET3 MET3,MET3TXT,MET3PIN
 labels MET3
 labels MET3PIN port
 labels MET3TXT text

 layer MET3RES MET3RES
 layer MET3FILL MET3FILL,ALTMET3FILL
 layer MET3BLOCK MET3BLOCK,ALTMET3BLOCK,OLDMET3BLOCK
 layer MET3SHORT MET3SHORT

 layer VIA3 VIA3

 layer MET4 MET4,MET4TXT,MET4PIN
 labels MET4
 labels MET4PIN port
 labels MET4TXT text

 layer MET4RES MET4RES
 layer MET4FILL MET4FILL,ALTMET4FILL
 layer MET4BLOCK MET4BLOCK,ALTMET4BLOCK,OLDMET4BLOCK
 layer MET4SHORT MET4SHORT

 layer VIA4 VIA4

 layer MET5 MET5,MET5TXT,MET5PIN
 labels MET5
 labels MET5PIN port
 labels MET5TXT text

 layer MET5RES MET5RES
 layer MET5FILL MET5FILL,ALTMET5FILL
 layer MET5BLOCK MET5BLOCK,ALTMET5BLOCK,OLDMET5BLOCK
 layer MET5SHORT MET5SHORT

 layer PAD PAD,PADTXT,PADPIN
 labels PAD
 labels PADPIN port
 labels PADTXT text

 layer STDCELLID STDCELLID
 layer COREID COREID
 layer TEXT TEXT
 layer HVTR HVTR
 layer RPM RPM
 layer URPM URPM
 layer LDNTM LDNTM
 layer HVNTM HVNTM
 layer PNP PNP
 layer NPN NPN
 layer CAP CAP
 layer LVID LVID
 layer IND IND
 layer ESD ESDID
 layer DIODE DIODE
 layer BOUND BOUND
 layer BOUND2 BOUND2
 layer OUTLINE OUTLINE
#ifdef RERAM
#undef RERAM
 layer RERAM RERAM
#define RERAM 1
#endif
 layer CAPM  CAPM
 layer CAP2M  CAP2M
 layer PWELLRES PWELLRES
 layer LOWTAPDENSITY LOWTAPDENSITY
 layer PADDIFFID PADDIFFID
 layer PADMETALID PADMETALID
 layer PADCENTERID PADCENTERID
 layer CP1MADD CP1MADD
 layer CP1MDROP CP1MDROP
 layer CNTMADD CNTMADD
 layer CLI1MADD CLI1MADD
 layer CLI1MDROP CLI1MDROP
 layer CFOMDROP CFOMDROP
 layer UNKNOWN1 UNKNOWN1
 layer UNKNOWN2 UNKNOWN2
 layer UNKNOWN3 UNKNOWN3

 calma NWELL  64 20
 calma PWELL  81 53
 calma DNWELL 64 18
 calma DIFF   65 20
 calma TAP    65 44
 calma LVTN  125 44
 calma HVTP   78 44
 calma HVI    75 20
 calma TUNM   80 20
 calma POLY   66 20
 calma NPC    95 20
 calma NCM    92 44
 calma PSDM   94 20
 calma NSDM   93 44
 calma LICON1 66 44
 calma LI1    67 20
 calma LI1TXT 67 16
 calma LI1PIN 67 5
 calma MCON   67 44
 calma MET1   68 20
 calma MET1TXT  68 16
 calma MET1PIN  68 5
 calma VIA1   68 44
#ifdef RERAM
#undef RERAM
 calma RERAM 201 20
#define RERAM 1
#endif
 calma MET2   69 20
 calma MET2TXT  69 16
 calma MET2PIN  69 5
 calma VIA2   69 44
 calma MET3   70 20
 calma MET3TXT  70 16
 calma MET3PIN  70 5
 calma CAPM	89 44
 calma VIA3   70 44
 calma MET4   71 20
 calma MET4TXT  71 16
 calma MET4PIN  71 5
 calma CAP2M	97 44
 calma VIA4   71 44
 calma MET5   72 20
 calma MET5TXT  72 16
 calma MET5PIN  72 5
 calma PAD    76 20
 calma PADTXT 76 16
 calma PADPIN 76 5
 calma STDCELLID 81 4
 calma TEXT   83 44
 calma HVTR   18 20
 calma RPM    86 20
 calma URPM   79 20
 calma LDNTM  11 44
 calma HVNTM 125 20
 calma PNP    82 44
 calma NPN    82 20
 calma CAP    82 64
 calma LVID   81 60
 calma IND    82 24
 calma LOWTAPDENSITY 81 14
 calma PWELLRES  64 13
 calma POLYRES 66 13
 calma POLYGATE 66 9
 calma POLYCUT 66 14
 calma DIFFRES 65 13
 calma DIFFCUT 65 14
 calma DIODE  81 23
 calma POLYMOD 66 83
 calma COREID 81 2
 calma PADDIFFID 81 6
 calma PADMETALID 81 8
 calma PADCENTERID 81 20
 calma CP1MADD 33 43
 calma CP1MDROP 33 42
 calma CNTMADD 22 21
 calma CLI1MADD 115 43
 calma CLI1MDROP 115 42
 calma CFOMDROP 22 22
 calma UNKNOWN1 230 241
 calma UNKNOWN2 230 242
 calma UNKNOWN3 64 44
 calma NWELLTXT  64 16
 calma PWELLTXT 122 16
 calma NWELLPIN  64 5
 calma POLYTXT  66 16
 calma POLYPIN  66 5
 calma PWELLPIN 64 59
 calma BOUND  235 4
 calma BOUND2 235 0
 calma OUTLINE 236 0
 calma ESDID 81 19
 calma DIFFBLOCK 22 24
 calma POLYBLOCK 33 24
 calma LIBLOCK 67 10
 calma MET1BLOCK 62 24
 calma MET2BLOCK 105 52
 calma MET3BLOCK 107 24
 calma MET4BLOCK 112 4
 calma MET5BLOCK 117 4
 calma DIFFFILL 23 28
 calma POLYFILL 28 28
 calma LI1FILL  56 28
 calma MET1FILL 36 28
 calma MET2FILL 41 28
 calma MET3FILL 34 28
 calma MET4FILL 51 28
 calma MET5FILL 59 28
 calma POLYSHORT 66 15
 calma LISHORT 67 15
 calma MET1SHORT 68 15
 calma MET2SHORT 69 15
 calma MET3SHORT 70 15
 calma MET4SHORT 71 15
 calma MET5SHORT 72 15
 calma LI1RES 67 13
 calma MET1RES 68 13
 calma MET2RES 69 13
 calma MET3RES 70 13
 calma MET4RES 71 13
 calma MET5RES 72 13
 calma ALTDIFFFILL 65 99
 calma ALTPOLYFILL 66 99
 calma ALTLI1FILL  67 99
 calma ALTMET1FILL 68 99
 calma ALTMET2FILL 69 99
 calma ALTMET3FILL 70 99
 calma ALTMET4FILL 71 99
 calma ALTMET5FILL 72 99
 calma ALTDIFFBLOCK 65 98
 calma ALTPOLYBLOCK 66 98
 calma ALTLIBLOCK 67 98
 calma ALTMET1BLOCK 68 98
 calma ALTMET2BLOCK 69 98
 calma ALTMET3BLOCK 70 98
 calma ALTMET4BLOCK 71 98
 calma ALTMET5BLOCK 72 98
 calma OLDLIBLOCK 67 10
 calma OLDMET1BLOCK 68 10
 calma OLDMET2BLOCK 69 10
 calma OLDMET3BLOCK 70 10
 calma OLDMET4BLOCK 71 10
 calma OLDMET5BLOCK 72 10

end
 
mzrouter
end

#---------------------------------------------------------------------
# DRC style used to check DRC errors GDS layers directly.  Generally,
# this covers rules not found in sky130A.tech
#---------------------------------------------------------------------

drc
 scalefactor 10

 # NPC rules

 width NPC 270 "NPC width < %d (NPC.1)"
 spacing NPC NPC 270 touching_ok "NPC to NPC spacing < %d (NPC.2)"
 spacing NPC LICON 90 surround_ok "NPC to non-poly LICON spacing < %d (LICON.13)"
 angles NPC 45 "Only 45 degree angles allowed on NPC (X.3)"
 off_grid NPC 5 "NPC shape not on %d grid (X.1b)"

 # HVTP rules

 width HVTP 380 "HVTP width < %d (HVTP.1)"
 spacing HVTP HVTP 700 touching_ok "HVTP to HVTP spacing < %d (HVTP.2)"
 area HVTP 265000 380 "HVTP minimum area < %a (HVTP.5)"
 angles HVTP 45 "Only 45 degree angles allowed on HVTP (X.3)"
 off_grid HVTP 5 "HVTP shape not on %d grid (X.1b)"

 # THKOX rules

 width THKOX 600 "HVI width < %d (HVI.1)"
 spacing THKOX THKOX 700 touching_ok "THKOX to THKOX spacing < %d (HVI.2)"
 spacing THKOX NWELL 700 surround_ok "THKOX to NWELL spacint < %d (HVI.5)"
 no_overlap THKOX TUNM
 off_grid THKOX 5 "THKOX shape not on %d grid (X.1b)"

 # NSDM rules

 width NSDM 380 "NSDM width < %d (NSDM.1)"
 spacing NSDM NSDM 380 touching_ok "NSDM to NSDM spacing < %d (NSDM.2)"
 angles NSDM 45 "Only 45 degree angles allowed on NSDM (X.3)"
 off_grid NSDM 5 "NSDM shape not on %d grid (X.1b)"

 # PSDM rules

 width PSDM 380 "PSDM width < %d (PSDM.1)"
 spacing PSDM PSDM 380 touching_ok "PSDM to PSDM spacing < %d (PSDM.2)"
 angles PSDM 45 "Only 45 degree angles allowed on PSDM (X.3)"
 off_grid PSDM 5 "PSDM shape not on %d grid (X.1b)"

end

extract
style default
 planeorder dw  0
 planeorder w   1
 planeorder i1  2
 planeorder i2  3
 planeorder i3  4
 planeorder i4  5
 planeorder i5  6
 planeorder i6  7
 planeorder i7  8
 planeorder i8  9
 planeorder a   10
 planeorder p   11
 planeorder mc  12
 planeorder li  13
 planeorder lc  14
#ifdef RERAM
 planeorder rr  15
 planeorder m1  16
 planeorder v1  17
 planeorder m2  18
 planeorder v2  19
 planeorder m3  20
 planeorder c1  21
 planeorder v3  22
 planeorder m4  23
 planeorder c2  24
 planeorder v4  25
 planeorder m5  26
 planeorder g   27
 planeorder bd  28
 planeorder bp  29
 planeorder bl  30
 planeorder b1  31
 planeorder b2  32
 planeorder b3  33
 planeorder b4  34
 planeorder b5  35
 planeorder id1 36
 planeorder id2 37
 planeorder id3 38
 planeorder id4 39
 planeorder id5 40
 planeorder id6 41
 planeorder id7 42
 planeorder id8 43
 planeorder id9 44
 planeorder c 	45
 planeorder e	46
#else
 planeorder m1  15
 planeorder v1  16
 planeorder m2  17
 planeorder v2  18
 planeorder m3  19
 planeorder c1  20
 planeorder v3  21
 planeorder m4  22
 planeorder c2  23
 planeorder v4  24
 planeorder m5  25
 planeorder g   26
 planeorder bd  27
 planeorder bp  28
 planeorder bl  29
 planeorder b1  30
 planeorder b2  31
 planeorder b3  32
 planeorder b4  33
 planeorder b5  34
 planeorder id1 35
 planeorder id2 36
 planeorder id3 37
 planeorder id4 38
 planeorder id5 39
 planeorder id6 40
 planeorder id7 41
 planeorder id8 42
 planeorder id9 43
 planeorder c 	44
 planeorder e	45
#endif
end