)]}'
{
  "commit": "19e1983e5acefd7b827624b3c180556a8b58a07a",
  "tree": "083ca8f39094a054fa99bc07c3c2a75ccd74dcde",
  "parents": [
    "c46b95326320cb7314d2c55d200c54533dedb97c"
  ],
  "author": {
    "name": "Tim Edwards",
    "email": "tim@opencircuitdesign.com",
    "time": "Mon Apr 12 16:23:09 2021 -0400"
  },
  "committer": {
    "name": "Tim Edwards",
    "email": "tim@opencircuitdesign.com",
    "time": "Mon Apr 12 16:23:09 2021 -0400"
  },
  "message": "Corrected the terminal resistance values for the xhigh_po (2000\nohms/sq. nominal) resistor, which were set to some old value\nleft over from cut-and-paste and not updated like the high_po\n(320 ohms/sq. nominal) resistor.  This error causes major\ndiscrepancies for the calculated device value when W is short.\nNote that this only affects the displayed value of the resistor\nin the device generator;  the device simulates according to the\ncorrect width and length.\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "861e11f287df83edda7a3bfa4c9d3f0c35db8ee6",
      "old_mode": 33188,
      "old_path": "sky130/magic/sky130.tcl",
      "new_id": "0ff4489b337ab7c5009305851f3ca5f924cbbd60",
      "new_mode": 33188,
      "new_path": "sky130/magic/sky130.tcl"
    }
  ]
}