*** P+ Poly Preres Corner Parameters ***
.param
+hrpoly_var_mult = -5
+camimc=  2.231e-15  $Units:  F/um^2
+cpmimc = 0.35e-15 $Units:  F/um
+cvpp_cor = 1.136
+cvpp3_cor = 1.3
+cvpp4_cor = 1.3
+cvpp5_cor = 1.3
+cm3m2_vpp = 1.620 $ This is with S8Q/S8P variation
+c0m5m4_vpp = 1.487
+c1m5m4_vpp = 1.419
+c0m5m4_vpp0p4shield = 3.04132
+c1m5m4_vpp0p4shield = 1.50414
+c0m4m3_vpp = 1.487
+c1m4m3_vpp = 1.419
+c0m5m3_vpp = 1.366
+c1m5m3_vpp = 1.496
+cpl2s_vpp = 1.460
+cpl2s_vpp0p4shield = 1.5250
+cli2s_vpp = 1.347
+xcmvpp8p6x7p9_m3_lishield_cor = 1.190
+xcmvpp4p4x4p6_m3_lishield_cor = 1.225
+xcmvpp11p5x11p7_m3_lishield_cor = 1.145
+xcmvpp8p6x7p9_cor = 1.173
+xcmvpp4p4x4p6_cor = 1.204
+xcmvpp11p5x11p7_cor = 1.132
+xcmvpp1p8x1p8_cor = 1.214
+xcmvpp8p6x7p9_lishield_cor = 1.173
+xcmvpp4p4x4p6_lishield_cor = 1.204
+xcmvpp11p5x11p7_lishield_cor = 1.132
+xcmvpp8p6x7p9_m3shield_cor = 1.154
+xcmvpp4p4x4p6_m3shield_cor = 1.184
+xcmvpp11p5x11p7_m3shield_cor = 1.115
+xcmvpp1p8x1p8_m3shield_cor = 1.123
+xcmvpp11p5x11p7_m5shield_cor = 1.144
+xcmvpp11p5x11p7_polym5shield_cor = 1.144
+xcmvpp11p5x11p7_lim5shield_cor = 1.144
+xcmvpp8p6x7p9_m3_lim5shield_cor = 1.208
+xcmvpp6p8x6p1_cor = 1.2
+xcmvpp11p5x11p7_m4shield_cor = 1.2
+xcmvpp_atlas_cor = 1.2
+xcmvpp_hd5_cor = 1.2

* To use S8D/S8T variation for M3-to-M2 cap, add the following line (remove *) in your simulation deck to overwrite parameter:
*.param cm3m2_vpp = 1.362

.include "xcmvpp_all_cu.mod"