blob: 9efe3f875e248e1434dfa3e0196d74d6d4bc514d [file] [log] [blame]
/**
* Copyright 2020 The SkyWater PDK Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* SPDX-License-Identifier: Apache-2.0
*/
`ifndef SKY130_FD_SC_LS__A311OI_TB_V
`define SKY130_FD_SC_LS__A311OI_TB_V
/**
* a311oi: 3-input AND into first input of 3-input NOR.
*
* Y = !((A1 & A2 & A3) | B1 | C1)
*
* Autogenerated test bench.
*
* WARNING: This file is autogenerated, do not modify directly!
*/
`timescale 1ns / 1ps
`default_nettype none
`include "sky130_fd_sc_ls__a311oi.v"
module top();
// Inputs are registered
reg A1;
reg A2;
reg A3;
reg B1;
reg C1;
reg VPWR;
reg VGND;
reg VPB;
reg VNB;
// Outputs are wires
wire Y;
initial
begin
// Initial state is x for all inputs.
A1 = 1'bX;
A2 = 1'bX;
A3 = 1'bX;
B1 = 1'bX;
C1 = 1'bX;
VGND = 1'bX;
VNB = 1'bX;
VPB = 1'bX;
VPWR = 1'bX;
#20 A1 = 1'b0;
#40 A2 = 1'b0;
#60 A3 = 1'b0;
#80 B1 = 1'b0;
#100 C1 = 1'b0;
#120 VGND = 1'b0;
#140 VNB = 1'b0;
#160 VPB = 1'b0;
#180 VPWR = 1'b0;
#200 A1 = 1'b1;
#220 A2 = 1'b1;
#240 A3 = 1'b1;
#260 B1 = 1'b1;
#280 C1 = 1'b1;
#300 VGND = 1'b1;
#320 VNB = 1'b1;
#340 VPB = 1'b1;
#360 VPWR = 1'b1;
#380 A1 = 1'b0;
#400 A2 = 1'b0;
#420 A3 = 1'b0;
#440 B1 = 1'b0;
#460 C1 = 1'b0;
#480 VGND = 1'b0;
#500 VNB = 1'b0;
#520 VPB = 1'b0;
#540 VPWR = 1'b0;
#560 VPWR = 1'b1;
#580 VPB = 1'b1;
#600 VNB = 1'b1;
#620 VGND = 1'b1;
#640 C1 = 1'b1;
#660 B1 = 1'b1;
#680 A3 = 1'b1;
#700 A2 = 1'b1;
#720 A1 = 1'b1;
#740 VPWR = 1'bx;
#760 VPB = 1'bx;
#780 VNB = 1'bx;
#800 VGND = 1'bx;
#820 C1 = 1'bx;
#840 B1 = 1'bx;
#860 A3 = 1'bx;
#880 A2 = 1'bx;
#900 A1 = 1'bx;
end
sky130_fd_sc_ls__a311oi dut (.A1(A1), .A2(A2), .A3(A3), .B1(B1), .C1(C1), .VPWR(VPWR), .VGND(VGND), .VPB(VPB), .VNB(VNB), .Y(Y));
endmodule
`default_nettype wire
`endif // SKY130_FD_SC_LS__A311OI_TB_V