| * Copyright 2020 The SkyWater PDK Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * https://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| |
| * SKY130 Spice File. |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__tox_slope=0.80e-2 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__tox2_slope=0.86e-2 $ for L>=4 and W<=0.75 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__tox3_slope=0.55e-2 $ for L>=4 and W>=3.0 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__tox4_slope=2.55e-2 $ for L<=0.6 and W<=3.0 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__tox_offset=0.000 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__nfactor_slope=0.000 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__voff_slope=0.00375 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__voff2_slope=0.00850 $ for L>=4 and W=0.42 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__lint_slope=3.0e-09 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__lint1_slope=0.0e-09 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__wint_slope=0.0e-11 $ Not used |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_toxe_slope= .80e-2 |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_toxe_slope1= 2.05e-2 $ All W with L=0.5um |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_toxe_slope2= 1.00e-2 $ W=3 L=1 um All W with L=0.8um & L=0.6um |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_toxe_slope3= 0.67e-2 $ All W with L=4.0um |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_vth0_slope=0.000 $ All devices |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_voff_slope=0.13 $ All devices |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_nfactor_slope=0.12 $ All devices |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_lint_slope=0.0 $ All devices |
| .param sky130_fd_pr__rf_nfet_g5v0d10v5__b_wint_slope=0.0 $ All devices |
