blob: 8e274ab5939567211a829a427b24bac06a7a5783 [file] [log] [blame]
* Copyright 2020 The SkyWater PDK Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* SKY130 Spice File.
.param sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre = 0.0
.param sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre = 0.0
.param sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre = 0.0
.param sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre = 0.0
* statistics {
* process {
* }
* mismatch {
* vary sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre dist=gauss std = 1.0
* vary sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre dist=gauss std = 1.0
* vary sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre dist=gauss std = 1.0
* vary sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre dist=gauss std = 1.0
* }
* }
.subckt sky130_fd_pr__nfet_03v3_nvt d g s b
+
.param l = 1 w = 1 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__nfet_03v3_nvt d g s b sky130_fd_pr__nfet_03v3_nvt__model l = {l} w = {w} ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__nfet_03v3_nvt__model.0 nmos
* DC IV MOS Parameters
+ lmin = 4.95e-07 lmax = 5.05e-07 wmin = 9.995e-06 wmax = 1.0005e-5
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {-0.0007337+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_0+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.27
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_0}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {116050+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_0}
+ ua = {5.1975e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_0}
+ ub = {5.727e-020+sky130_fd_pr__nfet_03v3_nvt__ub_diff_0}
+ uc = 1.3541e-10
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_0}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.091551+sky130_fd_pr__nfet_03v3_nvt__u0_diff_0}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_0}
+ keta = {0.0070658+sky130_fd_pr__nfet_03v3_nvt__keta_diff_0}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_0}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_0}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_0}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_0+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {2.0354+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_0+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_0}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0.017338+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_0}
+ etab = 0.0
+ dsub = 0.59286
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_0}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 6.234e-7
+ alpha1 = 0.0
+ beta0 = 21.814
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_0}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_0}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.33884+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_0}
+ kt2 = 0.0
+ at = 40500.0
+ ute = -1.716
+ ua1 = 1.0e-9
+ ub1 = -1.18e-17
+ uc1 = -3.696e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.745e-6
+ sbref = 1.74e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.1 nmos
* DC IV MOS Parameters
+ lmin = 4.95e-07 lmax = 5.05e-07 wmin = 9.95e-07 wmax = 1.005e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {-0.0007337+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_1+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.27
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_1}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.018557
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {125130+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_1}
+ ua = {4.848e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_1}
+ ub = {5.727e-020+sky130_fd_pr__nfet_03v3_nvt__ub_diff_1}
+ uc = 1.3541e-10
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_1}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.087889+sky130_fd_pr__nfet_03v3_nvt__u0_diff_1}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_1}
+ keta = {0.019064+sky130_fd_pr__nfet_03v3_nvt__keta_diff_1}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_1}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_1}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_1}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_1+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {2.0354+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_1+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_1}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0.0017338+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_1}
+ etab = 1.0e-10
+ dsub = 0.59286
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_1}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 4.8972e-7
+ alpha1 = 0.03
+ beta0 = 20.82
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_1}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_1}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.33884+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_1}
+ kt2 = -0.02
+ at = 40500.0
+ ute = -1.716
+ ua1 = 1.0e-9
+ ub1 = -1.2744e-17
+ uc1 = -2.5133e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.745e-6
+ sbref = 1.74e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.2 nmos
* DC IV MOS Parameters
+ lmin = 5.95e-07 lmax = 6.05e-07 wmin = 9.95e-07 wmax = 1.005e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {0.068092+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_2+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.33502
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_2}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {118050+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_2}
+ ua = {4.145e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_2}
+ ub = {3.7798e-019+sky130_fd_pr__nfet_03v3_nvt__ub_diff_2}
+ uc = 1.3541e-10
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_2}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.083529+sky130_fd_pr__nfet_03v3_nvt__u0_diff_2}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_2}
+ keta = {-0.016684+sky130_fd_pr__nfet_03v3_nvt__keta_diff_2}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_2}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_2}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_2}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_2+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {0.77345+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_2+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_2}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_2}
+ etab = 0.0
+ dsub = 0.071143
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_2}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 8.3952e-7
+ alpha1 = 0.33
+ beta0 = 23.0
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_2}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_2}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.29818+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_2}
+ kt2 = -0.02
+ at = 37260.0
+ ute = -1.613
+ ua1 = 1.0e-9
+ ub1 = -8.411e-18
+ uc1 = -2.5133e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.95e-6
+ sbref = 1.94e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.3 nmos
* DC IV MOS Parameters
+ lmin = 4.95e-07 lmax = 5.05e-07 wmin = 3.995e-06 wmax = 4.005e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {-0.0007337+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_3+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.27
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_3}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {118050+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_3}
+ ua = {5.05e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_3}
+ ub = {5.727e-020+sky130_fd_pr__nfet_03v3_nvt__ub_diff_3}
+ uc = 1.3541e-10
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_3}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.087889+sky130_fd_pr__nfet_03v3_nvt__u0_diff_3}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_3}
+ keta = {0.0070658+sky130_fd_pr__nfet_03v3_nvt__keta_diff_3}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_3}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_3}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_3}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_3+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {2.0354+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_3+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_3}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0.017338+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_3}
+ etab = 0.0
+ dsub = 0.59286
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_3}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 7.6956e-7
+ alpha1 = 0.0
+ beta0 = 22.396
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_3}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_3}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.33884+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_3}
+ kt2 = -0.02
+ at = 40500.0
+ ute = -1.716
+ ua1 = 1.0e-9
+ ub1 = -1.2744e-17
+ uc1 = -2.5133e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.745e-6
+ sbref = 1.74e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.4 nmos
* DC IV MOS Parameters
+ lmin = 4.95e-07 lmax = 5.05e-07 wmin = 4.15e-07 wmax = 4.25e-7
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {-0.022934+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_4+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.30326
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_4}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {133130+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_4}
+ ua = {4.1034e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_4}
+ ub = {4.971e-020+sky130_fd_pr__nfet_03v3_nvt__ub_diff_4}
+ uc = 2.1124e-11
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_4}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.084373+sky130_fd_pr__nfet_03v3_nvt__u0_diff_4}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_4}
+ keta = {0.030502+sky130_fd_pr__nfet_03v3_nvt__keta_diff_4}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_4}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_4}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_4}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_4+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {2.0354+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_4+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_4}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0.00020806+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_4}
+ etab = 1.0e-10
+ dsub = 0.59286
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_4}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 5.4233e-7
+ alpha1 = 0.0
+ beta0 = 21.174
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_4}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_4}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.35239+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_4}
+ kt2 = -0.02
+ at = 40500.0
+ ute = -1.5444
+ ua1 = 1.0e-9
+ ub1 = -9.4306e-18
+ uc1 = -1.2064e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.745e-6
+ sbref = 1.74e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.5 nmos
* DC IV MOS Parameters
+ lmin = 5.95e-07 lmax = 6.05e-07 wmin = 4.15e-07 wmax = 4.25e-7
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {0.007535+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_5+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.33965
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_5}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {127800+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_5}
+ ua = {3.7751e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_5}
+ ub = {4.4739e-020+sky130_fd_pr__nfet_03v3_nvt__ub_diff_5}
+ uc = 6.2248e-11
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_5}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.079311+sky130_fd_pr__nfet_03v3_nvt__u0_diff_5}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_5}
+ keta = {0.0018301+sky130_fd_pr__nfet_03v3_nvt__keta_diff_5}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_5}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_5}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_5}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_5+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {2.0354+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_5+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_5}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0.00020806+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_5}
+ etab = 1.0e-10
+ dsub = 0.59286
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_5}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 5.3596e-7
+ alpha1 = 0.0
+ beta0 = 21.074
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_5}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_5}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.33884+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_5}
+ kt2 = -0.02
+ at = 40500.0
+ ute = -1.5444
+ ua1 = 1.0e-9
+ ub1 = -8.6659e-18
+ uc1 = -2.5133e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.95e-6
+ sbref = 1.94e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.6 nmos
* DC IV MOS Parameters
+ lmin = 7.95e-07 lmax = 8.05e-07 wmin = 4.15e-07 wmax = 4.25e-7
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {0.071092+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_6+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.40202
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_6}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {117770+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_6}
+ ua = {2.9844e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_6}
+ ub = {3.7798e-019+sky130_fd_pr__nfet_03v3_nvt__ub_diff_6}
+ uc = 7.3121e-11
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_6}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.073506+sky130_fd_pr__nfet_03v3_nvt__u0_diff_6}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_6}
+ keta = {0+sky130_fd_pr__nfet_03v3_nvt__keta_diff_6}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_6}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_6}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_6}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_6+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {0.77345+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_6+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_6}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_6}
+ etab = 0.0
+ dsub = 0.071143
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_6}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 8.5632e-7
+ alpha1 = 0.09
+ beta0 = 21.989
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_6}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_6}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.30496+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_6}
+ kt2 = -0.02
+ at = 28350.0
+ ute = -1.613
+ ua1 = 1.0e-9
+ ub1 = -6.8818e-18
+ uc1 = -1.3069e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 2.34e-6
+ sbref = 2.34e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.7 nmos
* DC IV MOS Parameters
+ lmin = 4.95e-07 lmax = 5.05e-07 wmin = 6.95e-07 wmax = 7.05e-7
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {-0.011467+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_7+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.2808
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_7}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {128010+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_7}
+ ua = {4.4602e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_7}
+ ub = {8.0178e-020+sky130_fd_pr__nfet_03v3_nvt__ub_diff_7}
+ uc = 7.0413e-11
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_7}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.084373+sky130_fd_pr__nfet_03v3_nvt__u0_diff_7}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_7}
+ keta = {0.019064+sky130_fd_pr__nfet_03v3_nvt__keta_diff_7}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_7}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_7}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_7}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_7+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {2.0354+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_7+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_7}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0.00020806+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_7}
+ etab = 1.0e-10
+ dsub = 0.59286
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_7}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 3.9877e-7
+ alpha1 = 0.15
+ beta0 = 20.36
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_7}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_7}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.34562+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_7}
+ kt2 = -0.02
+ at = 40500.0
+ ute = -1.613
+ ua1 = 1.0e-9
+ ub1 = -1.1724e-17
+ uc1 = -2.5133e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.745e-6
+ sbref = 1.74e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.model sky130_fd_pr__nfet_03v3_nvt__model.8 nmos
* DC IV MOS Parameters
+ lmin = 5.95e-07 lmax = 6.05e-07 wmin = 6.95e-07 wmax = 7.05e-7
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 1.16e-8
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__nfet_03v3_nvt__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {0+sky130_fd_pr__nfet_03v3_nvt__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 0.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 0.0
+ tempmod = 0.0
+ lintnoi = 0.0
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 0.0
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.89
+ rnoib = 0.38
+ tnoia = 6.4e+6
+ tnoib = 7.2e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult+sky130_fd_pr__nfet_03v3_nvt__toxe_slope_spectre*(1.16e-008*sky130_fd_pr__nfet_03v3_nvt__toxe_mult*(sky130_fd_pr__nfet_03v3_nvt__toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = 0.1
+ rsh = {1*sky130_fd_pr__nfet_03v3_nvt__rshn_mult}
* Threshold Voltage Parameters
+ vth0 = {0.071092+sky130_fd_pr__nfet_03v3_nvt__vth0_diff_8+sky130_fd_pr__nfet_03v3_nvt__vth0_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.33502
+ k2 = {0+sky130_fd_pr__nfet_03v3_nvt__k2_diff_8}
+ k3 = 0.0
+ dvt0 = 1.0e-10
+ dvt1 = 0.536
+ dvt2 = -0.05
+ dvt0w = 0.0
+ dvt1w = 5000000.0
+ dvt2w = -0.032
+ w0 = 0.0
+ k3b = 0.0
* NEW BSIM4 Parameters for Level 54
+ phin = 0.01855708
+ lpe0 = -1.0e-10
+ lpeb = 0.0
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {120770+sky130_fd_pr__nfet_03v3_nvt__vsat_diff_8}
+ ua = {4.145e-009+sky130_fd_pr__nfet_03v3_nvt__ua_diff_8}
+ ub = {3.7798e-019+sky130_fd_pr__nfet_03v3_nvt__ub_diff_8}
+ uc = 1.3541e-10
+ rdsw = {0+sky130_fd_pr__nfet_03v3_nvt__rdsw_diff_8}
+ prwb = 0.0
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.083529+sky130_fd_pr__nfet_03v3_nvt__u0_diff_8}
+ a0 = {0.00031139121+sky130_fd_pr__nfet_03v3_nvt__a0_diff_8}
+ keta = {0.0047834+sky130_fd_pr__nfet_03v3_nvt__keta_diff_8}
+ a1 = 0.0
+ a2 = 0.6218093
+ ags = {0.00014554757+sky130_fd_pr__nfet_03v3_nvt__ags_diff_8}
+ b0 = {0+sky130_fd_pr__nfet_03v3_nvt__b0_diff_8}
+ b1 = {0+sky130_fd_pr__nfet_03v3_nvt__b1_diff_8}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 0.0
+ rdwmin = 0.0
+ rsw = 0.0
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.098774+sky130_fd_pr__nfet_03v3_nvt__voff_diff_8+sky130_fd_pr__nfet_03v3_nvt__voff_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__voff_slope/sqrt(l*w*mult))}
+ nfactor = {0.77345+sky130_fd_pr__nfet_03v3_nvt__nfactor_diff_8+sky130_fd_pr__nfet_03v3_nvt__nfactor_slope_spectre*(sky130_fd_pr__nfet_03v3_nvt__nfactor_slope/sqrt(l*w*mult))}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = {0+sky130_fd_pr__nfet_03v3_nvt__tvoff_diff_8}
+ cit = -3.3686011e-37
+ cdsc = 0.0
+ cdscb = -0.0001
+ cdscd = 1.5e-5
+ eta0 = {0+sky130_fd_pr__nfet_03v3_nvt__eta0_diff_8}
+ etab = 0.0
+ dsub = 0.071143
* BSIM4 - Sub-threshold parameters
+ voffl = -2.9752837e-11
+ minv = 0.0
* Rout Parameters
+ pclm = {2.8944111+sky130_fd_pr__nfet_03v3_nvt__pclm_diff_8}
+ pdiblc1 = 0.87012255
+ pdiblc2 = 0.032974
+ pdiblcb = -0.05
+ drout = 0.27268
+ pscbe1 = 4.24e+9
+ pscbe2 = 1.0e-8
+ pvag = 5.2718232
+ delta = 0.01
+ alpha0 = 3.498e-7
+ alpha1 = 0.35
+ beta0 = 21.582
* BSIM4 - Rout Parameters
+ fprout = 10.125
+ pdits = {5.666761e-016+sky130_fd_pr__nfet_03v3_nvt__pdits_diff_8}
+ pditsl = 0.0
+ pditsd = {0+sky130_fd_pr__nfet_03v3_nvt__pditsd_diff_8}
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.8
+ egidl = 0.5
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 0.43
+ bigbacc = 0.054
+ cigbacc = 0.075
+ nigbacc = 1.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 3.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 1.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 1.16e-8
* Temperature Effects Parameters
+ kt1 = {-0.30496+sky130_fd_pr__nfet_03v3_nvt__kt1_diff_8}
+ kt2 = -0.02
+ at = 34830.0
+ ute = -1.6817
+ ua1 = 1.0e-9
+ ub1 = -9.9403e-18
+ uc1 = -2.5133e-10
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 12.0
+ xrcrg2 = 1.0
+ rbpb = 50.0
+ rbpd = 50.0
+ rbps = 50.0
+ rbdb = 50.0
+ rbsb = 50.0
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 2.5e+41
+ noib = 0.0
+ noic = 0.0
+ em = 4.1000000e+7
+ af = 1.0
+ ef = 1.0
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 0.0
+ xgl = 0.0
+ ngcon = 1.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.5764
+ jss = 0.00042966
+ jsws = 8.040000000000001e-10
+ xtis = 0.0
+ bvs = 12.69
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0019685
+ tpbsw = 0.001
+ tpbswg = 0.0
+ tcj = 0.00083
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgso = {3.2646e-010*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cgdl = {5e-011*sky130_fd_pr__nfet_03v3_nvt__overlap_mult}
+ cf = 0.0
+ clc = 1.0e-7
+ cle = 0.6
+ dlc = {6.5233e-008+sky130_fd_pr__nfet_03v3_nvt__dlc_diff+sky130_fd_pr__nfet_03v3_nvt__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__nfet_03v3_nvt__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.4
+ moin = 15.0
+ noff = 4.00
+ voffcv = -0.14208
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0008602*sky130_fd_pr__nfet_03v3_nvt__ajunction_mult}
+ mjs = 0.28329
+ pbs = 0.66345
+ cjsws = {8.5152e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjsws = 0.057926
+ pbsws = 1.0
+ cjswgs = {3.58e-011*sky130_fd_pr__nfet_03v3_nvt__pjunction_mult}
+ mjswgs = 0.33
+ pbswgs = 0.2442
* Stress Parameters
+ saref = 1.95e-6
+ sbref = 1.94e-6
+ wlod = {0+sky130_fd_pr__nfet_03v3_nvt__wlod_diff}
+ kvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__kvth0_diff}
+ lkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__lkvth0_diff}
+ wkvth0 = {0+sky130_fd_pr__nfet_03v3_nvt__wkvth0_diff}
+ pkvth0 = 0.0
+ llodvth = 0.0
+ wlodvth = 1.0
+ stk2 = 0.0
+ lodk2 = 1.0
+ lodeta0 = 1.0
+ ku0 = {0+sky130_fd_pr__nfet_03v3_nvt__ku0_diff}
+ lku0 = {0+sky130_fd_pr__nfet_03v3_nvt__lku0_diff}
+ wku0 = {0+sky130_fd_pr__nfet_03v3_nvt__wku0_diff}
+ pku0 = 0.0
+ llodku0 = 0.0
+ wlodku0 = 1.0
+ kvsat = {0+sky130_fd_pr__nfet_03v3_nvt__kvsat_diff}
+ steta0 = 0.0
+ tku0 = 0.0
.ends sky130_fd_pr__nfet_03v3_nvt