* Copyright 2020 The SkyWater PDK Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
*     https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.

* SKY130 Spice File.
.param sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre = 0.0
.param sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre = 0.0
* statistics {
*   process {
*   }
*   mismatch {
*     vary sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre dist=gauss std = 1.0
*     vary sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre dist=gauss std = 1.0
*   }
* }
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM02 d g s b
+ 
.param  l = 1 w = 1 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM02 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model l = {l} w = {w} ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.0 nmos
* DC IV MOS Parameters
+ lmin = 1.45e-07 lmax = 1.55e-07 wmin = 1.645e-06 wmax = 1.655e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.14e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.498+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_0+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_0}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.64e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_0}
+ ua = {-2.21e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_0}
+ ub = {2.525e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_0}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_0}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_0}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_0}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_0}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_0}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_0}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2166+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_0}
+ nfactor = {2.991+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_0}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.3604
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.2056+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_0}
+ pdiblc1 = 0.238
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.4074
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03842
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2709+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_0}
+ kt2 = -0.02437
+ at = 7.8725e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {900*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {8.2e-07+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.389e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {4e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {1.4e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {7e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.0
+ dlc = {2.3e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.00255*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9977
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {4.213e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.1 nmos
* DC IV MOS Parameters
+ lmin = 1.75e-07 lmax = 1.85e-07 wmin = 1.645e-06 wmax = 1.655e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.011e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.502+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_1+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_1}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.54e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_1}
+ ua = {-1.786e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_1}
+ ub = {2.173e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_1}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_1}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03224+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_1}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_1}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_1}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_1}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_1}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2036+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_1}
+ nfactor = {2.685+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_1}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 1.0e-10
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.227+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_1}
+ pdiblc1 = 0.2584
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.39
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03138
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2709+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_1}
+ kt2 = -0.02437
+ at = 6.700e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {900*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.26e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.389e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.95e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {8.5e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.5e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.8
+ voffcv = -0.07
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.5
+ cjswgs = {2.813e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.2 nmos
* DC IV MOS Parameters
+ lmin = 2.45e-07 lmax = 2.55e-07 wmin = 1.645e-06 wmax = 1.655e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.14e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.498+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_2+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_2}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.56e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_2}
+ ua = {-1.901e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_2}
+ ub = {2.515e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_2}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_2}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_2}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_2}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_2}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_2}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_2}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.1949+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_2}
+ nfactor = {2.991+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_2}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.3604
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.204+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_2}
+ pdiblc1 = 0.238
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.4074
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03842
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.3000+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_2}
+ kt2 = -0.02437
+ at = 6.1806e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.14e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {900*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.33e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000992
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.859e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {4.35e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {2e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.2e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.2
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0025*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.222
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.913e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.1
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM02
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM02W3p00 d g s b
+ 
.param  l = 1 w = 3.01 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM02W3p00 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model l = {l} w = 3.01 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.3 nmos
* DC IV MOS Parameters
+ lmin = 1.45e-07 lmax = 1.55e-07 wmin = 3.005e-06 wmax = 3.015e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4788+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_3+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_3}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.56e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_3}
+ ua = {-1.984e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_3}
+ ub = {2.376e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_3}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_3}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03224+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_3}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_3}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_3}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_3}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_3}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2256+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_3}
+ nfactor = {2.991+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_3}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.2183+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_3}
+ pdiblc1 = 0.238
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03202
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2507+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_3}
+ kt2 = -0.02437
+ at = 7.705e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -6.0024e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {440*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {8.75e-07+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.0
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000992
+ tcjsw = 0.0
+ tcjswg = 0.0
+ cgdo = {3.289e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.2e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {1.9e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.513e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.5
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.4 nmos
* DC IV MOS Parameters
+ lmin = 1.75e-07 lmax = 1.85e-07 wmin = 3.005e-06 wmax = 3.015e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-4e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.502+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_4+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_4}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.54e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_4}
+ ua = {-1.984e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_4}
+ ub = {2.492e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_4}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_4}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03224+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_4}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_4}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_4}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_4}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_4}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2166+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_4}
+ nfactor = {1.974+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_4}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 1.0e-10
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.2183+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_4}
+ pdiblc1 = 0.219
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03138
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.25432+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_4}
+ kt2 = -0.02437
+ at = 6.432e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {440*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.35e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.389e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.8e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.5e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.9
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.5
+ cjswgs = {2.813e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.5 nmos
* DC IV MOS Parameters
+ lmin = 2.45e-07 lmax = 2.55e-07 wmin = 3.005e-06 wmax = 3.015e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-4e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.482+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_5+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_5}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.611e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_5}
+ ua = {-1.884e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_5}
+ ub = {2.432e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_5}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_5}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.029+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_5}
+ a0 = {1.883+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_5}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.4465+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_5}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_5}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_5}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2166+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_5}
+ nfactor = {1.074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_5}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 1.0e-10
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.3465
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1223+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_5}
+ pdiblc1 = 0.1445
+ pdiblc2 = 0.01136
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.02761
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2543+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_5}
+ kt2 = -0.02437
+ at = 6.432e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {440*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.35e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.389e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.8e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {9.4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.1e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.9
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.5
+ cjswgs = {2.813e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM02W3p00
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00 d g s b
+ 
.param  l = 1 w = 5.05 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model l = {l} w = 5.05 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.6 nmos
* DC IV MOS Parameters
+ lmin = 1.45e-07 lmax = 1.55e-07 wmin = 5.045e-06 wmax = 5.055e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-5.962e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.477+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_6+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_6}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.606e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_6}
+ ua = {-1.944e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_6}
+ ub = {2.18e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_6}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_6}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03354+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_6}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_6}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_6}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_6}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_6}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.23+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_6}
+ nfactor = {2.931+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_6}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1907+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_6}
+ pdiblc1 = 0.2121
+ pdiblc2 = 0.02195
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.02453
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2507+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_6}
+ kt2 = -0.02437
+ at = 7.705e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -6.0024e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {190*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.092e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.189e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.2e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {2e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.4e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0022*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.222
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.513e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.5
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00L0p18 d g s b
+ 
.param  l = 0.18 w = 5.05 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00L0p18 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model l = 0.18 w = 5.05 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.7 nmos
* DC IV MOS Parameters
+ lmin = 1.75e-07 lmax = 1.85E-07 wmin = 5.045E-06 wmax = 5.055e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-4e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.489+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_7+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_7}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.5e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_7}
+ ua = {-1.984e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_7}
+ ub = {2.352e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_7}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_7}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03124+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_7}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_7}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_7}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_7}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_7}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2166+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_7}
+ nfactor = {2.053+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_7}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 1.0e-10
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.227+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_7}
+ pdiblc1 = 0.2278
+ pdiblc2 = 0.005138
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03138
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2543+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_7}
+ kt2 = -0.02437
+ at = 6.432e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {200*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 1.35e-6
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.289e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.6e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.7e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.9
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.5
+ cjswgs = {2.813e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00L0p18
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00L0p25 d g s b
+ 
.param  l = 0.25 w = 5.05 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00L0p25 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model l = 0.25 w = 5.05 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM02__model.8 nmos
* DC IV MOS Parameters
+ lmin = 2.45e-07 lmax = 2.55E-07 wmin = 5.045E-06 wmax = 5.055e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-4e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.474+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vth0_diff_8+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__k2_diff_8}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.581e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__vsat_diff_8}
+ ua = {-1.874e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ua_diff_8}
+ ub = {2.472e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ub_diff_8}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__rdsw_diff_8}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.0305+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__u0_diff_8}
+ a0 = {1.883+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__a0_diff_8}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.4465+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__ags_diff_8}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b0_diff_8}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__b1_diff_8}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2166+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__voff_diff_8}
+ nfactor = {1.074+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__nfactor_diff_8}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 1.0e-10
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.3465
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1223+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__pclm_diff_8}
+ pdiblc1 = 0.1445
+ pdiblc2 = 0.008634
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03258
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2543+sky130_fd_pr__rf_nfet_01v8_lvt_bM02__kt1_diff_8}
+ kt2 = -0.02437
+ at = 6.432e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {200*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 1.35e-6
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.489e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.4e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {9.4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.7e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.9
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0014*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.5
+ cjswgs = {2.813e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM02W5p00L0p25
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM04 d g s b
+ 
.param  l = 1 w = 1 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM04 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model l = {l} w = {w} ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.0 nmos
* DC IV MOS Parameters
+ lmin = 1.45e-07 lmax = 1.55e-07 wmin = 1.645e-06 wmax = 1.655e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.14e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.972
+ rnoib = 0.20
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4908+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_0+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_0}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.651e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_0}
+ ua = {-2.21e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_0}
+ ub = {2.424e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_0}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_0}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.0309+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_0}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_0}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_0}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_0}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_0}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2166+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_0}
+ nfactor = {2.991+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_0}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.3604
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1603+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_0}
+ pdiblc1 = 0.238
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.4074
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03842
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2709+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_0}
+ kt2 = -0.02437
+ at = 7.873e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {1800*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.16e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.299e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.9e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {6e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.18e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.513e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.5
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.1 nmos
* DC IV MOS Parameters
+ lmin = 1.75e-07 lmax = 1.85e-07 wmin = 1.645e-06 wmax = 1.655e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.072e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.51+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_1+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_1}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.448e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_1}
+ ua = {-1.822e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_1}
+ ub = {2.193e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_1}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_1}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03224+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_1}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_1}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_1}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_1}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_1}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2036+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_1}
+ nfactor = {2.087+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_1}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 1.0e-10
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.3323+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_1}
+ pdiblc1 = 0.2584
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.39
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.0182
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2709+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_1}
+ kt2 = -0.02437
+ at = 6.7e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {1800*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.25e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.689e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {4.15e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {8.5e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.5e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.8
+ voffcv = -0.07
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.5
+ cjswgs = {2.213e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.2
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.2 nmos
* DC IV MOS Parameters
+ lmin = 2.45e-07 lmax = 2.55e-07 wmin = 1.645e-06 wmax = 1.655e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.14e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.852
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.499+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_2+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_2}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.49e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_2}
+ ua = {-1.871e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_2}
+ ub = {2.402e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_2}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_2}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_2}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_2}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_2}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_2}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_2}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.1949+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_2}
+ nfactor = {2+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_2}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.3604
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.204+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_2}
+ pdiblc1 = 0.2723
+ pdiblc2 = 0.003569
+ pdiblcb = -1.0
+ drout = 0.4074
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03842
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2709+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_2}
+ kt2 = -0.02437
+ at = 5.328e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {1800*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.35e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {4.009e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {4.15e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {1.05e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.0e-11
+ cle = 1.9
+ dlc = {2.2e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 0.8
+ voffcv = -0.07
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.002*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.1
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM04
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM04W3p00 d g s b
+ 
.param  l = 1 w = 3.01 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM04W3p00 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model l = {l} w = 3.01 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.3 nmos
* DC IV MOS Parameters
+ lmin = 1.45e-07 lmax = 1.55e-07 wmin = 3.005e-06 wmax = 3.015e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-4e-10+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4788+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_3+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_3}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.556e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_3}
+ ua = {-1.924e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_3}
+ ub = {2.336e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_3}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_3}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03224+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_3}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_3}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_3}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_3}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_3}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2256+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_3}
+ nfactor = {2.931+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_3}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.2239+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_3}
+ pdiblc1 = 0.238
+ pdiblc2 = 0.004705
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.02433
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2779+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_3}
+ kt2 = -0.02437
+ at = 7.203e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {880*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.35e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {2.809e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {2.8e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {5e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {5e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.7e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0025*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.513e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.5
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.4 nmos
* DC IV MOS Parameters
+ lmin = 1.75e-07 lmax = 1.85e-07 wmin = 3.005e-06 wmax = 3.015e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.128e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4959+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_4+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_4}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.56e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_4}
+ ua = {-1.992e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_4}
+ ub = {2.361e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_4}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_4}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03224+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_4}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_4}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_4}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_4}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_4}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.1865+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_4}
+ nfactor = {2.991+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_4}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1703+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_4}
+ pdiblc1 = 0.2047
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.3367
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03202
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2779+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_4}
+ kt2 = -0.02437
+ at = 7.203e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {880*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.35e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.189e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3.1e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {7.4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.8e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.3
+ pbswgs = 0.9964
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.5 nmos
* DC IV MOS Parameters
+ lmin = 2.45e-07 lmax = 2.55E-07 wmin = 3.005E-06 wmax = 3.015e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.128e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.852
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4921+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_5+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_5}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.52e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_5}
+ ua = {-1.972e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_5}
+ ub = {2.511e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_5}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_5}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.02944+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_5}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_5}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_5}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_5}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_5}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.1865+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_5}
+ nfactor = {1.795+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_5}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1703+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_5}
+ pdiblc1 = 0.2047
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.3367
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03202
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2779+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_5}
+ kt2 = -0.02437
+ at = 7.203e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {880*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 1.35e-6
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.659e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {2e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {7.4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.7e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = 0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0011*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {1.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.3
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM04W3p00
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00 d g s b
+ 
.param  l = 1 w = 5.05 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model l = {l} w = 5.05 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.6 nmos
* DC IV MOS Parameters
+ lmin = 1.45e-07 lmax = 1.55e-07 wmin = 5.045e-06 wmax = 5.055e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-3.312e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4788+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_6+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_6}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.646e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_6}
+ ua = {-1.974e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_6}
+ ub = {2.469e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_6}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_6}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03324+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_6}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_6}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_6}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_6}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_6}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.2473+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_6}
+ nfactor = {2.931+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_6}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1616+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_6}
+ pdiblc1 = 0.2525
+ pdiblc2 = 0.01568
+ pdiblcb = -1.0
+ drout = 0.4244
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.02725
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2779+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_6}
+ kt2 = -0.02437
+ at = 7.203e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {380*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = {1.35e-06+sky130_fd_pr__rf_nfet_01v8_lvt_b__xgw_diff}
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.089e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {2.8e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {2e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.8e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0025*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.422
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.513e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.5
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00L0p18 d g s b
+ 
.param  l = 0.18 w = 5.05 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00L0p18 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model l = 0.18 w = 5.05 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.7 nmos
* DC IV MOS Parameters
+ lmin = 1.75e-07 lmax = 1.85E-07 wmin = 5.045E-06 wmax = 5.055e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.128e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.912
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4889+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_7+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_7}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.56e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_7}
+ ua = {-1.992e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_7}
+ ub = {2.511e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_7}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_7}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.03344+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_7}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_7}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_7}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_7}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_7}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.1865+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_7}
+ nfactor = {1.795+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_7}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1703+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_7}
+ pdiblc1 = 0.2047
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.3367
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03202
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2779+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_7}
+ kt2 = -0.02437
+ at = 7.203e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {400*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 1.35e-6
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.029e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {7.4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.8e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.0024*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.3
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00L0p18
.subckt  sky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00L0p25 d g s b
+ 
.param  l = 0.25 w = 5.05 ad = 0 as = 0 pd = 0 ps = 0 nrd = 0 nrs = 0 sa = 0 sb = 0 sd = 0 mult = 1 nf = 1.0
msky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00L0p25 d g s b sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model l = 0.25 w = 5.05 ad = {ad} as = {as} pd = {pd} ps = {ps} nrd = {nrd} nrs = {nrs} sa = {sa} sb = {sb} sd = {sd} nf = {nf}
.model sky130_fd_pr__rf_nfet_01v8_lvt_bM04__model.8 nmos
* DC IV MOS Parameters
+ lmin = 2.45e-07 lmax = 2.55E-07 wmin = 5.045E-06 wmax = 5.055e-6
+ level = 54.0
+ tnom = 30.0
+ version = 4.5
+ toxm = 4.148e-9
+ xj = 1.5e-7
+ lln = 1.0
+ lwn = 1.0
+ wln = 1.0
+ wwn = 1.0
+ lint = {-1.128e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__lint_diff}
+ ll = 0.0
+ lw = 0.0
+ lwl = 0.0
+ wint = {9.181e-09+sky130_fd_pr__rf_nfet_01v8_lvt_b__wint_diff}
+ wl = 0.0
+ ww = 0.0
+ wwl = 0.0
+ xl = 0.0
+ xw = 0.0
+ mobmod = 0.0
+ binunit = 2.0
+ dwg = 0.0
+ dwb = 0.0
* BSIM4 - Model Selectors
+ igcmod = 0.0
+ igbmod = 0.0
+ rgatemod = 3.0
+ rbodymod = 1.0
+ trnqsmod = 0.0
+ acnqsmod = 0.0
+ fnoimod = 1.0
+ tnoimod = 1.0
+ permod = 1.0
+ geomod = 0.0
+ rdsmod = 1.0
+ tempmod = 0.0
+ lintnoi = -3.0e-7
+ vfbsdoff = 0.0
+ lambda = 0.0
+ vtl = 2.0e+5
+ lc = 5.0e-9
+ xn = 3.0
+ rnoia = 0.852
+ rnoib = 0.26
+ tnoia = 2.5e+7
+ tnoib = 9.9e+6
* BSIM4 - Process Parameters
+ epsrox = 3.9
+ toxe = {4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult+sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope_spectre*(4.148e-09*sky130_fd_pr__rf_nfet_01v8_lvt_b__toxe_mult*(sky130_fd_pr__rf_nfet_01v8_lvt__b_toxe_slope/sqrt(l*w*mult)))}
+ dtox = 0.0
+ ndep = 1.7e+17
+ nsd = 1.0e+20
+ rshg = {49.2+sky130_fd_pr__rf_nfet_01v8_lvt_b__rshg_diff}
+ rsh = 1.0
* Threshold Voltage Parameters
+ vth0 = {0.4869+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vth0_diff_8+sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope_spectre*(sky130_fd_pr__rf_nfet_01v8_lvt__b_vth0_slope/sqrt(l*w*mult))}
+ k1 = 0.5415
+ k2 = {-0.07197+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__k2_diff_8}
+ k3 = 3.0
+ dvt0 = 0.0
+ dvt1 = 0.53
+ dvt2 = -0.032
+ dvt0w = -0.2864
+ dvt1w = 1.671e+6
+ dvt2w = -0.3571
+ w0 = 0.0
+ k3b = 1.48
* NEW BSIM4 Parameters for Level 54
+ phin = 0.0
+ lpe0 = 1.342e-7
+ lpeb = -7.224e-8
+ vbm = -3.0
+ dvtp0 = 0.0
+ dvtp1 = 0.0
* Mobility Parameters
+ vsat = {1.51e+05+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__vsat_diff_8}
+ ua = {-1.992e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ua_diff_8}
+ ub = {2.621e-18+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ub_diff_8}
+ uc = 7.917e-11
+ rdsw = {98.95+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__rdsw_diff_8}
+ prwb = 0.008
+ prwg = 0.0
+ wr = 1.0
+ u0 = {0.0307+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__u0_diff_8}
+ a0 = {1.471+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__a0_diff_8}
+ keta = 0.1378
+ a1 = 0.0
+ a2 = 0.4239
+ ags = {0.5074+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__ags_diff_8}
+ b0 = {-1.502e-07+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b0_diff_8}
+ b1 = {1.902e-09+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__b1_diff_8}
* BSIM4 - Mobility Parameters
+ eu = 1.67
+ rdswmin = 0.0
+ rdw = 98.95
+ rdwmin = 0.0
+ rsw = 98.95
+ rswmin = 0.0
* Subthreshold Current Parameters
+ voff = {-0.1865+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__voff_diff_8}
+ nfactor = {1.795+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__nfactor_diff_8}
+ up = 0.0
+ ud = 0.0
+ lp = 1.0
+ tvfbsdoff = 0.0
+ tvoff = 0.0
+ cit = 0.0
+ cdsc = 0.0
+ cdscb = 0.0
+ cdscd = 0.0
+ eta0 = 0.231
+ etab = 0.0001546
+ dsub = 0.4657
* BSIM4 - Sub-threshold parameters
+ voffl = 5.82e-9
+ minv = 0.0
* Rout Parameters
+ pclm = {0.1703+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__pclm_diff_8}
+ pdiblc1 = 0.2047
+ pdiblc2 = 0.002704
+ pdiblcb = -1.0
+ drout = 0.3367
+ pscbe1 = 3.731e+8
+ pscbe2 = 2.0e-6
+ pvag = 0.0
+ delta = 0.03202
+ alpha0 = 1.21e-7
+ alpha1 = 0.8767
+ beta0 = 14.77
* BSIM4 - Rout Parameters
+ fprout = 0.0
+ pdits = 0.0
+ pditsl = 0.0
+ pditsd = 0.0
* BSIM4 - Gate Induced Drain Leakage Model Parameters
+ agidl = 0.0
+ bgidl = 2.3e+9
+ cgidl = 0.5
+ egidl = 0.8
* BSIM4 - Gate Leakage Current Parameters
+ aigbacc = 1.0
+ bigbacc = 0.0
+ cigbacc = 0.0
+ nigbacc = 0.0
+ aigbinv = 0.35
+ bigbinv = 0.03
+ cigbinv = 0.006
+ eigbinv = 1.1
+ nigbinv = 0.0
+ aigc = 0.43
+ bigc = 0.054
+ cigc = 0.075
+ nigc = 0.0
+ aigsd = 0.43
+ bigsd = 0.054
+ cigsd = 0.075
+ dlcig = 0.0
+ poxedge = 1.0
+ pigcd = 1.0
+ ntox = 1.0
+ toxref = 4.148e-9
* Temperature Effects Parameters
+ kt1 = {-0.2779+sky130_fd_pr__rf_nfet_01v8_lvt_bM04__kt1_diff_8}
+ kt2 = -0.02437
+ at = 7.203e+4
+ ute = -1.681
+ ua1 = 6.012e-10
+ ub1 = -7.32e-19
+ uc1 = 1.09e-12
+ kt1l = 0.0
+ prt = 0.0
* BSIM4 - High Speed RF Model Parameters
+ xrcrg1 = 10.0
+ xrcrg2 = 2.0
+ rbpb = {400*sky130_fd_pr__rf_nfet_01v8_lvt_b__rbpb_mult}
+ rbpd = 0.001
+ rbps = 0.001
+ rbdb = 1.0e+5
+ rbsb = 1.0e+5
+ gbmin = 1.0e-12
* BSIM4 - Flicker and Thermal Noise Parameters
+ noia = 9.0e+41
+ noib = 1.0e+27
+ noic = 800000000000.0
+ em = 4.1e+7
+ af = 1.0
+ ef = 1.2
+ kf = 0.0
+ ntnoi = 1.0
* BSIM4 - Layout Dependent Parasitic Model Parameters
+ dmcg = 0.0
+ dmcgt = 0.0
+ dmdg = 0.0
+ xgw = 1.35e-6
+ ngcon = 2.0
* Diode DC IV Parameters
* BSIM4 - Diode DC IV parameters
+ diomod = 1.0
+ njs = 1.293
+ jss = 0.00275
+ jsws = 6.0e-10
+ xtis = 2.0
+ bvs = 11.9
+ xjbvs = 1.0
+ ijthsrev = 0.1
+ ijthsfwd = 0.1
* Diode and FET Capacitance Parameters
+ tpb = 0.001229
+ tpbsw = 0.0
+ tpbswg = 0.0
+ tcj = 0.000792
+ tcjsw = 1.0e-5
+ tcjswg = 0.0
+ cgdo = {3.709e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgso = {3e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgbo = 0.0
+ capmod = 2.0
+ xpart = 0.0
+ cgsl = {4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cgdl = {7.4e-11*sky130_fd_pr__rf_nfet_01v8_lvt_b__overlap_mult}
+ cf = 1.0e-11
+ clc = 1.2e-8
+ cle = 1.9
+ dlc = {2.9e-08+sky130_fd_pr__rf_nfet_01v8_lvt_b__dlc_diff+sky130_fd_pr__rf_nfet_01v8_lvt__base__dlc_rotweak}
+ dwc = {0+sky130_fd_pr__rf_nfet_01v8_lvt_b__dwc_diff}
+ vfbcv = -1.0
+ acde = 0.3801
+ moin = 23.81
+ noff = 1.0
+ voffcv = -0.06
+ ngate = 1.0e+23
+ lwc = 0.0
+ llc = 0.0
+ lwlc = 0.0
+ wlc = 0.0
+ wwc = 0.0
+ wwlc = 0.0
* BSIM4 - FET and Diode capacitance parameters
+ ckappas = 0.6
+ cjs = {0.002*sky130_fd_pr__rf_nfet_01v8_lvt_b__ajunction_mult}
+ mjs = 0.322
+ pbs = 0.9477
+ cjsws = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjsws = 0.001
+ pbsws = 0.4
+ cjswgs = {2.013e-10*sky130_fd_pr__rf_nfet_01v8_lvt_b__pjunction_mult}
+ mjswgs = 0.3
+ pbswgs = 0.9964
.ends sky130_fd_pr__rf_nfet_01v8_lvt_bM04W5p00L0p25