blob: 5249b9103e84e07bef28e2720472e9d7617aa8e9 [file] [log] [blame]
* Copyright 2020 The SkyWater PDK Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* SKY130 Spice File.
* statistics {
* mismatch {
* }
* process {
* vary sky130_fd_pr__res_xhigh_po__var_mult dist=gauss std=0.025
* vary sky130_fd_pr__res_high_po__var dist=gauss std=0.025
* }
* }
.subckt sky130_fd_pr__res_high_po_1p41 r0 r1 b
+
.param w = 1.410 l = 5 mult = 1.0
+
+ body_pelgrom = 0.0354
+ rend_mm = 0.033
+ rcon = 254.77
+ rsheet = 230.05
+ tc1_voltco = -4.68e-3
+ vc1_body = -1.24e-4
+ vc2_body = 2.41e-4
+ vc1_raw_end = -7.62e-2
+ vc2_raw_end = 0.198
+ vc3_raw_end = 8.81e-2
+ r0_var = 15.43
+ r1_var = 6.96
+ vc1_end = {vc1_raw_end*0.705/l*(1+tc1_voltco*(temp-30))}
+ vc2_end = {vc2_raw_end*0.705/l*(1+tc1_voltco*(temp-30))}
+ vc3_end = {vc3_raw_end*0.705/l*(1+tc1_voltco*(temp-30))}
+ rtot_var = {sky130_fd_pr__res_high_po__var_mult*sqrt(2*pow(r0_var,2)+pow((r1_var*l),2))}
+ rend_var = {sky130_fd_pr__res_high_po__var_mult*sqrt(2)*r0_var}
+ rbody_var = {rtot_var-rend_var}
+ res_match = {(body_pelgrom/sqrt(w*l*mult))*sky130_fd_pr__res_high_po__slope_spectre}
+ rend = {(rcon+rend_var)*(1+rend_mm/sqrt(mult)*sky130_fd_pr__res_high_po__con_slope_spectre)}
+ rbody = {(l*rsheet+rbody_var)*(1+res_match)}
rend r0 ra r = {rend*(1+min((abs(v(r0,r1))-1.4),0.6)*vc1_end+pow(min(abs(v(r0,r1))-1.4,0.6),2)*vc2_end+pow(min(abs(v(r0,r1))-1.4,0.6),3)*vc3_end)}
rhrpoly_1p41 ra r1 resbody r = {rbody*(1+abs(v(r0,r1))*vc1_body+pow(abs(v(r0,r1)),2)*vc2_body)}
c1 r0 b c = {((l+2*2.08)*w*crpf_precision*1e-12+2*(l+2*2.08+w)*crpfsw_precision_4_1*1e-6)/2}
c2 r1 b c = {((l+2*2.08)*w*crpf_precision*1e-12+2*(l+2*2.08+w)*crpfsw_precision_4_1*1e-6)/2}
.model resbody r tc1 = {tc1rpolybody} tc2 = {tc2rpolybody} tnom = 30.0
.ends sky130_fd_pr__res_high_po_1p41