blob: 9a270202a89af3d45274059939996579975c2123 [file] [log] [blame]
* Copyright 2020 The SkyWater PDK Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* SKY130 Spice File.
* statistics {
* mismatch {
* }
* }
.subckt sky130_fd_pr__res_xhigh_po__base r1 r2 b
+
+ w=1 l=1 mult=1
+
.param rsheet = 2000.0
+ vc1_body = -1.00e-3
+ vc2_body = -1.00e-4
+ vc1_raw_end = -2.02e-2
+ vc2_raw_end = 1.55e-1
+ vc3_raw_end = 4.61e-2
+ body_pelgrom = 0.0347
+ r0_var = {17.23/w+2.318}
+ r1_var = {11.76/w}
+ rcon = {-46.62/(w*w)+331.73/w+20.576}
+ rend_mm = {0.0472/sqrt(w)}
+ tc1_voltco = -7.1e-3
+ rend_var = {sky130_fd_pr__res_high_po__var_mult*sqrt(2)*r0_var}
+ rtot_var = {sky130_fd_pr__res_high_po__var_mult*sqrt(2*pow(r0_var,2)+pow((r1_var*l),2))}
+ res_match = {(body_pelgrom/sqrt(w*l*mult))*sky130_fd_pr__res_high_po__slope_spectre}
+ rbody_var = {rtot_var-rend_var}
+ rend = {(rcon+rend_var)*(1+rend_mm/sqrt(mult)*sky130_fd_pr__res_high_po__con_slope_spectre)}
+ vc1_end = {vc1_raw_end/pwr(l,0.5)*(1+tc1_voltco*(temp-30))}
+ vc2_end = {vc2_raw_end/pwr(l,0.5)*(1+tc1_voltco*(temp-30))}
+ vc3_end = {vc3_raw_end/pwr(l,0.5)*(1+tc1_voltco*(temp-30))}
+ rbody = {(l*rsheet+rbody_var)*(1+res_match)/w}
rbody ra r2 resbody r = {rbody*(1+abs(v(r1,r2))*vc1_body+abs(v(r1,r2))*abs(v(r1,r2))/(l*l)*vc2_body)}
rend r1 ra r = {rend*(1+vc1_raw_end*(1-exp(-abs(v(r2,r1))))+
+ vc2_raw_end*(1 - exp(-abs(v(r2,r1)))) * (1 - exp(-abs(v(r2,r1)))) +
+ vc3_raw_end*(1 - exp(-abs(v(r2,r1)))) * (1 - exp(-abs(v(r2,r1)))) * (1 - exp(-abs(v(r2,r1)))) ) }
c1 r2 b c = {((l+2*2.08)*w*crpf_precision*1e-12+2*(l+2*2.08+w)*crpfsw_precision_1_1*1e-6)/2}
c2 r1 b c = {((l+2*2.08)*w*crpf_precision*1e-12+2*(l+2*2.08+w)*crpfsw_precision_1_1*1e-6)/2}
.model resbody r tc1 = -1.47e-3 tc2 = 2.7e-6 tnom = 30.0
.ends sky130_fd_pr__res_xhigh_po__base