| Name,Description,Flags,Value,Unit |
| (pwres.1.-),Pwell resistor has to be enclosed by the res layer,NC,, |
| (pwres.2.-),Min/Max width of pwell resistor,,2.650,µm |
| (pwres.3.-),Min length of pwell resistor,,26.500,µm |
| (pwres.4.-),Max length of pwell resistor,,265.00,µm |
| (pwres.5.-),Min/Max spacing of tap inside the pwell resistor to nwell,,0.220,µm |
| (pwres.6.-),Min/Max width of tap inside the pwell resistor,,0.530,µm |
| (pwres.7a.-),Every pwres_terminal must enclose 12 licon1,,, |
| (pwres.7b.-),Every pwres_terminal must enclose 12 mcons if routed through metal1,,, |
| (pwres.8.-),Diff or poly is not allowed in the pwell resistor.,,, |
| (pwres.9.-),Nwell surrounding the pwell resistor must have a full ring of contacted tap strapped with metal.,,, |
| (pwres.10.-),The res layer must abut pwres_terminal on opposite and parallel edges,,, |
| (pwres.11.-),The res layer must abut nwell on opposite and parallel edges not checked in Rule pwres.10,,, |
