| P- poly precision resistors |
| --------------------------- |
| |
| Spice Model Information |
| ~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| - Cell Name: :cell:`res_xhigh_po_XpXX`, :cell:`sky130_fd_pr__res_xhigh_po` |
| - Model Type: subcircuit |
| |
| Operating ranges where SPICE models are valid |
| |
| - \|V\ :sub:`r0` – V\ :sub:`r1`\ \| = 0 to 5.0V |
| - Currents up to 500 µA/µm of width (preferred use ≤ 100 µA/µm) |
| |
| Details |
| ~~~~~~~ |
| |
| The resistors have 5 different fixed widths, plus a variable W/L option. |
| |
| - 0.35 (0p35) |
| - 0.69 (0p69) |
| - 1.41 (1p41) |
| - 2.85 (2p83) |
| - 5.73 (5p73) |
| |
| They are modeled as subcircuits, using a conventional resistor model combined with the capacitance under the resistor, as well as matching parameters and temperature coefficients. The fixed-width resistors may only be used in the above configurations. Each resistor end is contacted using a slot licon. Length is variable and measured between the front ends of the slot licons. |
| |
| The resistors are modeled using the same equations as for the P+ poly resistors. In the case of the P- poly resistors, a separate implant is used to set the sheet resistance to 2000 ohm/sq. |
| |
| Fixed value resistors have the same layout footprints as their P+ poly counterparts. Electrical and e-test specs are still TBD, once sufficient silicon has been evaluated. More details on the use of the precision resistors, and their models, are in the document ***SKY130 process Family Device Models*** (002-21997), currently under development. |
| |
| The symbols for the 2000 ohm/sq precision resistors are shown below: |
| |
| |symbol-res_xhigh_po_0p35| |symbol-res_xhigh_po_0p69| |
| |
| :model:`sky130_fd_pr__res_xhigh_po_0p35` :model:`sky130_fd_pr__res_xhigh_po_0p69` |
| |
| |symbol-res_xhigh_po_1p41| |symbol-res_xhigh_po_2p85| |
| |
| :model:`sky130_fd_pr__res_xhigh_po_1p41` :model:`sky130_fd_pr__res_xhigh_po_2p85` |
| |
| |symbol-res_xhigh_po_5p73| |
| |
| :model:`sky130_fd_pr__res_xhigh_po_5p73` |
| |
| A generic version of the poly resistor is also available, which permits user inputs for W and L, and connections in series or parallel. |
| |
| |symbol-res_xhigh_po| |
| |
| .. |symbol-res_xhigh_po_0p35| image:: symbol-res_xhigh_po_0p35.svg |
| .. |symbol-res_xhigh_po_0p69| image:: symbol-res_xhigh_po_0p69.svg |
| .. |symbol-res_xhigh_po_1p41| image:: symbol-res_xhigh_po_1p41.svg |
| .. |symbol-res_xhigh_po_2p85| image:: symbol-res_xhigh_po_2p85.svg |
| .. |symbol-res_xhigh_po_5p73| image:: symbol-res_xhigh_po_5p73.svg |
| .. |symbol-res_xhigh_po| image:: symbol-res_xhigh_po.svg |
| |
