| Name,Description,Flags,Value | |
| (pwres.1.-),Pwell resistor has to be enclosed by the res layer,NC, | |
| (pwres.2.-),Min/Max width of pwell resistor,,2.650 | |
| (pwres.3.-),Min length of pwell resistor,,26.500 | |
| (pwres.4.-),Max length of pwell resistor,,265.00 | |
| (pwres.5.-),Min/Max spacing of tap inside the pwell resistor to nwell,,0.220 | |
| (pwres.6.-),Min/Max width of tap inside the pwell resistor,,0.530 | |
| (pwres.7a.-),Every pwres_terminal must enclose 12 licon1,, | |
| (pwres.7b.-),Every pwres_terminal must enclose 12 mcons if routed through metal1,, | |
| (pwres.8.-),Diff or poly is not allowed in the pwell resistor.,, | |
| (pwres.9.-),Nwell surrounding the pwell resistor must have a full ring of contacted tap strapped with metal.,, | |
| (pwres.10.-),The res layer must abut pwres_terminal on opposite and parallel edges,, | |
| (pwres.11.-),The res layer must abut nwell on opposite and parallel edges not checked in Rule pwres.10,, |