| Name,Description,Flags,Value | |
| (ct.1),Min and max L and W of mcon,DNF,0.170 | |
| (ct.2),Spacing of mcon to mcon,DNF,0.190 | |
| (ct.3),Only min. square mcons are allowed except die seal ring where mcons are…,,0.170*L | |
| (ct.4),Mcon must be enclosed by LI by at least …,P,0.000 | |
| (ct.irdrop.1),"For 1 <= n <= 10 contacts on the same connector, mcon area pre- and post- Cu conversion must differ by no more than…",CU IR,0.2 | |
| (ct.irdrop.2),"For 11 <= n <= 100 contacts on the same connector, mcon area pre- and post- Cu conversion must differ by no more than…",CU IR,0.3 | |
| (ct.irdrop.3),"For n > 100 contacts on the same connector, mcon area pre- and post- Cu conversion must differ by no more than…",CU IR,0.7 |