diff --git a/tech/gf180mcu_2LM_1TM_30K_9t_tech.lef b/tech/gf180mcu_2LM_1TM_30K_9t_tech.lef
new file mode 100755
index 0000000..2dd2e6e
--- /dev/null
+++ b/tech/gf180mcu_2LM_1TM_30K_9t_tech.lef
@@ -0,0 +1,472 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 2LM_1TM_30K
+# Preferred routing directions:
+# vertical:   Metal2 
+# horizontal: Metal1
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.12 0.25 ;    
+  ENCLOSURE ABOVE 0.12 0.12 WIDTH 2.5 ;
+ PROPERTY LEF58_EOLENCLOSURE "
+	EOLENCLOSURE  2.5 ABOVE 0.250 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH    4.000 ;
+    MINWIDTH 2.200 ;                      # MT30.1
+    WIDTH    2.200 ;                      # MT30.1
+    SPACING  1.800 ;                      # MT30.2, MT30.3
+    MINIMUMCUT 4 WIDTH 1.790 FROMBELOW ;  # MT30.8b          
+
+    DCCURRENTDENSITY AVERAGE 5.37 ;
+    ACCURRENTDENSITY AVERAGE 8.06 ;
+    RESISTANCE RPERSQ 0.01000 ;
+
+    THICKNESS 3.035 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.250 0.120 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.120 0.250 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.250 0.120 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.120 0.250 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+VIARULE Via1_0 GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.120 0.120 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_0
+
+ VIA Via1_2X2_0_60_120_120_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.510 -0.510 0.510 0.510 ;
+ END Via1_2X2_0_60_120_120_H_H 
+ 
+ VIA Via1_2X2_0_60_120_120_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.510 -0.510 0.510 0.510 ;
+ END Via1_2X2_0_60_120_120_V_H 
+ 
+ VIA Via1_2X2_0_60_120_250_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.640 -0.510 0.640 0.510 ;
+ END Via1_2X2_0_60_120_250_H_H 
+ 
+ VIA Via1_2X2_0_60_120_250_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.510 -0.640 0.510 0.640 ;
+ END Via1_2X2_0_60_120_250_H_V 
+ 
+ VIA Via1_2X2_0_60_120_250_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.640 -0.510 0.640 0.510 ;
+ END Via1_2X2_0_60_120_250_V_H 
+ 
+ VIA Via1_2X2_0_60_120_250_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.510 -0.640 0.510 0.640 ;
+ END Via1_2X2_0_60_120_250_V_V 
+ 
+ VIA Via1_2X3_0_60_120_120_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.650 -0.130 -0.390 ;
+ RECT 0.130 -0.650 0.390 -0.390 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ RECT -0.390 0.390 -0.130 0.650 ;
+ RECT 0.130 0.390 0.390 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.650 0.450 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.510 -0.770 0.510 0.770 ;
+ END Via1_2X3_0_60_120_120_H_H 
+ 
+ VIA Via1_2X3_0_60_120_120_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.650 -0.130 -0.390 ;
+ RECT 0.130 -0.650 0.390 -0.390 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ RECT -0.390 0.390 -0.130 0.650 ;
+ RECT 0.130 0.390 0.390 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.710 0.390 0.710 ;
+ LAYER Metal2 ;
+ RECT -0.510 -0.770 0.510 0.770 ;
+ END Via1_2X3_0_60_120_120_V_H 
+ 
+ VIA Via1_3X3_0_60_120_120_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.710 -0.650 0.710 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.770 -0.770 0.770 0.770 ;
+ END Via1_3X3_0_60_120_120_H_H 
+ 
+ VIA Via1_3X3_0_60_120_120_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.650 -0.710 0.650 0.710 ;
+ LAYER Metal2 ;
+ RECT -0.770 -0.770 0.770 0.770 ;
+ END Via1_3X3_0_60_120_120_V_H 
+ 
+ VIA Via1_3X3_0_60_120_250_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.710 -0.650 0.710 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.900 -0.770 0.900 0.770 ;
+ END Via1_3X3_0_60_120_250_H_H 
+ 
+ VIA Via1_3X3_0_60_120_250_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.710 -0.650 0.710 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.770 -0.900 0.770 0.900 ;
+ END Via1_3X3_0_60_120_250_H_V 
+ 
+ VIA Via1_3X3_0_60_120_250_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.650 -0.710 0.650 0.710 ;
+ LAYER Metal2 ;
+ RECT -0.900 -0.770 0.900 0.770 ;
+ END Via1_3X3_0_60_120_250_V_H 
+ 
+ VIA Via1_3X3_0_60_120_250_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal1 ;
+ RECT -0.650 -0.710 0.650 0.710 ;
+ LAYER Metal2 ;
+ RECT -0.770 -0.900 0.770 0.900 ;
+ END Via1_3X3_0_60_120_250_V_V 
+ 
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.180 -1.180 1.180 1.180 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.180 -1.180 1.180 1.180 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT1  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.180 -1.310 1.180 1.310 ;
+ END Via1_4X4H_HV_DEFAULT1 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_3LM_1TM_11K_9t_tech.lef b/tech/gf180mcu_3LM_1TM_11K_9t_tech.lef
new file mode 100755
index 0000000..1190a38
--- /dev/null
+++ b/tech/gf180mcu_3LM_1TM_11K_9t_tech.lef
@@ -0,0 +1,690 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 3LM_1TM_11K
+# Preferred routing directions:
+# vertical:   Metal2 
+# horizontal: Metal1 Metal3
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.5 ;
+    ACCURRENTDENSITY AVERAGE 2.2 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 1.19 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_10_60_10_60_H_H 
+ 
+ VIA Via2_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_10_60_10_60_H_V 
+ 
+ VIA Via2_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_10_60_10_60_V_H 
+ 
+ VIA Via2_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_3LM_1TM_30K_9t_tech.lef b/tech/gf180mcu_3LM_1TM_30K_9t_tech.lef
new file mode 100755
index 0000000..dc5f845
--- /dev/null
+++ b/tech/gf180mcu_3LM_1TM_30K_9t_tech.lef
@@ -0,0 +1,769 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 3LM_1TM_30K
+# Preferred routing directions:
+# vertical:   Metal2 
+# horizontal: Metal1 Metal3
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.12 0.25 ;    
+  ENCLOSURE ABOVE 0.12 0.12 WIDTH 2.5 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+	EOLENCLOSURE  2.5 ABOVE 0.250 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH    4.000 ;
+    MINWIDTH 2.200 ;                      # MT30.1
+    WIDTH    2.200 ;                      # MT30.1
+    SPACING  1.800 ;                      # MT30.2, MT30.3
+    MINIMUMCUT 4 WIDTH 1.790 FROMBELOW ;  # MT30.8b          
+
+    DCCURRENTDENSITY AVERAGE 5.37 ;
+    ACCURRENTDENSITY AVERAGE 8.06 ;
+    RESISTANCE RPERSQ 0.01000 ;
+
+    THICKNESS 3.035 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.250 0.120 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.120 0.250 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.250 0.120 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.120 0.250 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+VIARULE Via2_0 GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.120 0.120 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_0
+
+ VIA Via2_2X2_10_60_120_120_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.510 -0.510 0.510 0.510 ;
+ END Via2_2X2_10_60_120_120_H_H 
+ 
+ VIA Via2_2X2_10_60_120_120_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.510 -0.510 0.510 0.510 ;
+ END Via2_2X2_10_60_120_120_V_H 
+ 
+ VIA Via2_2X2_10_60_120_250_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.640 -0.510 0.640 0.510 ;
+ END Via2_2X2_10_60_120_250_H_H 
+ 
+ VIA Via2_2X2_10_60_120_250_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.510 -0.640 0.510 0.640 ;
+ END Via2_2X2_10_60_120_250_H_V 
+ 
+ VIA Via2_2X2_10_60_120_250_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.640 -0.510 0.640 0.510 ;
+ END Via2_2X2_10_60_120_250_V_H 
+ 
+ VIA Via2_2X2_10_60_120_250_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.510 -0.640 0.510 0.640 ;
+ END Via2_2X2_10_60_120_250_V_V 
+ 
+ VIA Via2_2X3_10_60_120_120_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.650 -0.130 -0.390 ;
+ RECT 0.130 -0.650 0.390 -0.390 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ RECT -0.390 0.390 -0.130 0.650 ;
+ RECT 0.130 0.390 0.390 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.660 0.450 0.660 ;
+ LAYER Metal3 ;
+ RECT -0.510 -0.770 0.510 0.770 ;
+ END Via2_2X3_10_60_120_120_H_H 
+ 
+ VIA Via2_2X3_10_60_120_120_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.650 -0.130 -0.390 ;
+ RECT 0.130 -0.650 0.390 -0.390 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ RECT -0.390 0.390 -0.130 0.650 ;
+ RECT 0.130 0.390 0.390 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.710 0.400 0.710 ;
+ LAYER Metal3 ;
+ RECT -0.510 -0.770 0.510 0.770 ;
+ END Via2_2X3_10_60_120_120_V_H 
+ 
+ VIA Via2_3X3_10_60_120_120_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.710 -0.660 0.710 0.660 ;
+ LAYER Metal3 ;
+ RECT -0.770 -0.770 0.770 0.770 ;
+ END Via2_3X3_10_60_120_120_H_H 
+ 
+ VIA Via2_3X3_10_60_120_120_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.660 -0.710 0.660 0.710 ;
+ LAYER Metal3 ;
+ RECT -0.770 -0.770 0.770 0.770 ;
+ END Via2_3X3_10_60_120_120_V_H 
+ 
+ VIA Via2_3X3_10_60_120_250_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.710 -0.660 0.710 0.660 ;
+ LAYER Metal3 ;
+ RECT -0.900 -0.770 0.900 0.770 ;
+ END Via2_3X3_10_60_120_250_H_H 
+ 
+ VIA Via2_3X3_10_60_120_250_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.710 -0.660 0.710 0.660 ;
+ LAYER Metal3 ;
+ RECT -0.770 -0.900 0.770 0.900 ;
+ END Via2_3X3_10_60_120_250_H_V 
+ 
+ VIA Via2_3X3_10_60_120_250_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.660 -0.710 0.660 0.710 ;
+ LAYER Metal3 ;
+ RECT -0.900 -0.770 0.900 0.770 ;
+ END Via2_3X3_10_60_120_250_V_H 
+ 
+ VIA Via2_3X3_10_60_120_250_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal2 ;
+ RECT -0.660 -0.710 0.660 0.710 ;
+ LAYER Metal3 ;
+ RECT -0.770 -0.900 0.770 0.900 ;
+ END Via2_3X3_10_60_120_250_V_V 
+ 
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.180 -1.180 1.180 1.180 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.180 -1.180 1.180 1.180 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4V_VH_DEFAULT1  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.310 -1.180 1.310 1.180 ;
+ END Via2_4X4V_VH_DEFAULT1 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_3LM_1TM_6K_9t_tech.lef b/tech/gf180mcu_3LM_1TM_6K_9t_tech.lef
new file mode 100755
index 0000000..8d08f84
--- /dev/null
+++ b/tech/gf180mcu_3LM_1TM_6K_9t_tech.lef
@@ -0,0 +1,730 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 3LM_1TM_6K
+# Preferred routing directions:
+# vertical:   Metal3 
+# horizontal: Metal1 Metal2
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.74 ;
+    MINWIDTH 0.360 ;
+    WIDTH    0.360 ;                      # MT.1
+    AREA     0.5625 ;                     # MT.4
+    SPACING  0.380 ;                      # MT.2a
+    SPACING  0.500 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.07 ;
+    ACCURRENTDENSITY AVERAGE 1.60 ;
+    RESISTANCE RPERSQ 0.06000 ;
+
+    THICKNESS 0.69 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.180 0.190 0.180 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.180 -0.190 0.180 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.180 0.190 0.180 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.180 -0.190 0.180 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_1_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_HH 
+ 
+ VIA Via2_1_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_HV 
+ 
+ VIA Via2_1_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_VH 
+ 
+ VIA Via2_1_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_10_60_10_60_H_H 
+ 
+ VIA Via2_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_10_60_10_60_H_V 
+ 
+ VIA Via2_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_10_60_10_60_V_H 
+ 
+ VIA Via2_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_3LM_1TM_9K_9t_tech.lef b/tech/gf180mcu_3LM_1TM_9K_9t_tech.lef
new file mode 100755
index 0000000..50f95c4
--- /dev/null
+++ b/tech/gf180mcu_3LM_1TM_9K_9t_tech.lef
@@ -0,0 +1,751 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 3LM_1TM_9K
+# Preferred routing directions:
+# vertical:   Metal3 
+# horizontal: Metal1 Metal2
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+ # ENCLOSURE ABOVE 0.01 0.09 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.21 ;
+    ACCURRENTDENSITY AVERAGE 1.82 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 0.99 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_1_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_HH 
+ 
+ VIA Via2_1_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_HV 
+ 
+ VIA Via2_1_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_VH 
+ 
+ VIA Via2_1_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_1_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_10_60_10_60_H_H 
+ 
+ VIA Via2_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_10_60_10_60_H_V 
+ 
+ VIA Via2_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_10_60_10_60_V_H 
+ 
+ VIA Via2_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+VIARULE Via2_0_RULE GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_0_RULE
+
+VIARULE Via2_0 GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_0
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_4LM_1TM_11K_9t_tech.lef b/tech/gf180mcu_4LM_1TM_11K_9t_tech.lef
new file mode 100755
index 0000000..b2cba64
--- /dev/null
+++ b/tech/gf180mcu_4LM_1TM_11K_9t_tech.lef
@@ -0,0 +1,988 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 4LM_1TM_11K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 
+# horizontal: Metal1 Metal3
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.5 ;
+    ACCURRENTDENSITY AVERAGE 2.2 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 1.19 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via3_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_HH 
+ 
+ VIA Via3_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_HV 
+ 
+ VIA Via3_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_VH 
+ 
+ VIA Via3_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_VV 
+ 
+ VIA Via3_2CUT_H
+ LAYER Via3 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via3_2CUT_H
+ 
+ VIA Via3_2CUT_V
+ LAYER Via3 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via3_2CUT_V
+ 
+ VIA Via3_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_10_60_10_60_H_H 
+ 
+ VIA Via3_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_10_60_10_60_H_V 
+ 
+ VIA Via3_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_10_60_10_60_V_H 
+ 
+ VIA Via3_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_HV_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_4LM_1TM_30K_9t_tech.lef b/tech/gf180mcu_4LM_1TM_30K_9t_tech.lef
new file mode 100755
index 0000000..1f80312
--- /dev/null
+++ b/tech/gf180mcu_4LM_1TM_30K_9t_tech.lef
@@ -0,0 +1,1067 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 4LM_1TM_30K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 
+# horizontal: Metal1 Metal3
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.12 0.25 ;    
+  ENCLOSURE ABOVE 0.12 0.12 WIDTH 2.5 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+	EOLENCLOSURE  2.5 ABOVE 0.250 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH    4.000 ;
+    MINWIDTH 2.200 ;                      # MT30.1
+    WIDTH    2.200 ;                      # MT30.1
+    SPACING  1.800 ;                      # MT30.2, MT30.3
+    MINIMUMCUT 4 WIDTH 1.790 FROMBELOW ;  # MT30.8b          
+
+    DCCURRENTDENSITY AVERAGE 5.37 ;
+    ACCURRENTDENSITY AVERAGE 8.06 ;
+    RESISTANCE RPERSQ 0.01000 ;
+
+    THICKNESS 3.035 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.250 0.120 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.120 0.250 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.250 0.120 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.120 0.250 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+VIARULE Via3_0 GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.120 0.120 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_0
+
+ VIA Via3_2X2_10_60_120_120_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.510 -0.510 0.510 0.510 ;
+ END Via3_2X2_10_60_120_120_H_H 
+ 
+ VIA Via3_2X2_10_60_120_120_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.510 -0.510 0.510 0.510 ;
+ END Via3_2X2_10_60_120_120_V_H 
+ 
+ VIA Via3_2X2_10_60_120_250_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.640 -0.510 0.640 0.510 ;
+ END Via3_2X2_10_60_120_250_H_H 
+ 
+ VIA Via3_2X2_10_60_120_250_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.510 -0.640 0.510 0.640 ;
+ END Via3_2X2_10_60_120_250_H_V 
+ 
+ VIA Via3_2X2_10_60_120_250_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.640 -0.510 0.640 0.510 ;
+ END Via3_2X2_10_60_120_250_V_H 
+ 
+ VIA Via3_2X2_10_60_120_250_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.510 -0.640 0.510 0.640 ;
+ END Via3_2X2_10_60_120_250_V_V 
+ 
+ VIA Via3_2X3_10_60_120_120_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.650 -0.130 -0.390 ;
+ RECT 0.130 -0.650 0.390 -0.390 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ RECT -0.390 0.390 -0.130 0.650 ;
+ RECT 0.130 0.390 0.390 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.660 0.450 0.660 ;
+ LAYER Metal4 ;
+ RECT -0.510 -0.770 0.510 0.770 ;
+ END Via3_2X3_10_60_120_120_H_H 
+ 
+ VIA Via3_2X3_10_60_120_120_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.650 -0.130 -0.390 ;
+ RECT 0.130 -0.650 0.390 -0.390 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ RECT -0.390 0.390 -0.130 0.650 ;
+ RECT 0.130 0.390 0.390 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.710 0.400 0.710 ;
+ LAYER Metal4 ;
+ RECT -0.510 -0.770 0.510 0.770 ;
+ END Via3_2X3_10_60_120_120_V_H 
+ 
+ VIA Via3_3X3_10_60_120_120_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.710 -0.660 0.710 0.660 ;
+ LAYER Metal4 ;
+ RECT -0.770 -0.770 0.770 0.770 ;
+ END Via3_3X3_10_60_120_120_H_H 
+ 
+ VIA Via3_3X3_10_60_120_120_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.660 -0.710 0.660 0.710 ;
+ LAYER Metal4 ;
+ RECT -0.770 -0.770 0.770 0.770 ;
+ END Via3_3X3_10_60_120_120_V_H 
+ 
+ VIA Via3_3X3_10_60_120_250_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.710 -0.660 0.710 0.660 ;
+ LAYER Metal4 ;
+ RECT -0.900 -0.770 0.900 0.770 ;
+ END Via3_3X3_10_60_120_250_H_H 
+ 
+ VIA Via3_3X3_10_60_120_250_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.710 -0.660 0.710 0.660 ;
+ LAYER Metal4 ;
+ RECT -0.770 -0.900 0.770 0.900 ;
+ END Via3_3X3_10_60_120_250_H_V 
+ 
+ VIA Via3_3X3_10_60_120_250_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.660 -0.710 0.660 0.710 ;
+ LAYER Metal4 ;
+ RECT -0.900 -0.770 0.900 0.770 ;
+ END Via3_3X3_10_60_120_250_V_H 
+ 
+ VIA Via3_3X3_10_60_120_250_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.650 -0.650 -0.390 -0.390 ;
+ RECT -0.130 -0.650 0.130 -0.390 ;
+ RECT 0.390 -0.650 0.650 -0.390 ;
+ RECT -0.650 -0.130 -0.390 0.130 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ RECT 0.390 -0.130 0.650 0.130 ;
+ RECT -0.650 0.390 -0.390 0.650 ;
+ RECT -0.130 0.390 0.130 0.650 ;
+ RECT 0.390 0.390 0.650 0.650 ;
+ LAYER Metal3 ;
+ RECT -0.660 -0.710 0.660 0.710 ;
+ LAYER Metal4 ;
+ RECT -0.770 -0.900 0.770 0.900 ;
+ END Via3_3X3_10_60_120_250_V_V 
+ 
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.180 -1.180 1.180 1.180 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.180 -1.180 1.180 1.180 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT1  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.180 -1.310 1.180 1.310 ;
+ END Via3_4X4H_HV_DEFAULT1 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_4LM_1TM_6K_9t_tech.lef b/tech/gf180mcu_4LM_1TM_6K_9t_tech.lef
new file mode 100755
index 0000000..741a9a1
--- /dev/null
+++ b/tech/gf180mcu_4LM_1TM_6K_9t_tech.lef
@@ -0,0 +1,1028 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 4LM_1TM_6K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 
+# horizontal: Metal1 Metal3
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.74 ;
+    MINWIDTH 0.360 ;
+    WIDTH    0.360 ;                      # MT.1
+    AREA     0.5625 ;                     # MT.4
+    SPACING  0.380 ;                      # MT.2a
+    SPACING  0.500 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.07 ;
+    ACCURRENTDENSITY AVERAGE 1.60 ;
+    RESISTANCE RPERSQ 0.06000 ;
+
+    THICKNESS 0.69 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via3_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.180 0.190 0.180 ;
+ RESISTANCE 4.500 ;
+ END Via3_HH 
+ 
+ VIA Via3_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.180 -0.190 0.180 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_HV 
+ 
+ VIA Via3_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.180 0.190 0.180 ;
+ RESISTANCE 4.500 ;
+ END Via3_VH 
+ 
+ VIA Via3_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.180 -0.190 0.180 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_VV 
+ 
+ VIA Via3_1_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_HH 
+ 
+ VIA Via3_1_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_HV 
+ 
+ VIA Via3_1_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_VH 
+ 
+ VIA Via3_1_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_VV 
+ 
+ VIA Via3_2CUT_H
+ LAYER Via3 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via3_2CUT_H
+ 
+ VIA Via3_2CUT_V
+ LAYER Via3 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via3_2CUT_V
+ 
+ VIA Via3_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_10_60_10_60_H_H 
+ 
+ VIA Via3_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_10_60_10_60_H_V 
+ 
+ VIA Via3_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_10_60_10_60_V_H 
+ 
+ VIA Via3_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_HV_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_4LM_1TM_9K_9t_tech.lef b/tech/gf180mcu_4LM_1TM_9K_9t_tech.lef
new file mode 100755
index 0000000..8442315
--- /dev/null
+++ b/tech/gf180mcu_4LM_1TM_9K_9t_tech.lef
@@ -0,0 +1,1049 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 4LM_1TM_9K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 
+# horizontal: Metal1 Metal3
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+ # ENCLOSURE ABOVE 0.01 0.09 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.21 ;
+    ACCURRENTDENSITY AVERAGE 1.82 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 0.99 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via3_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_HH 
+ 
+ VIA Via3_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via3_HV 
+ 
+ VIA Via3_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_VH 
+ 
+ VIA Via3_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via3_VV 
+ 
+ VIA Via3_1_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_HH 
+ 
+ VIA Via3_1_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_HV 
+ 
+ VIA Via3_1_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_VH 
+ 
+ VIA Via3_1_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_1_VV 
+ 
+ VIA Via3_2CUT_H
+ LAYER Via3 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via3_2CUT_H
+ 
+ VIA Via3_2CUT_V
+ LAYER Via3 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via3_2CUT_V
+ 
+ VIA Via3_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_10_60_10_60_H_H 
+ 
+ VIA Via3_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_10_60_10_60_H_V 
+ 
+ VIA Via3_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_10_60_10_60_V_H 
+ 
+ VIA Via3_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+VIARULE Via3_0_RULE GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_0_RULE
+
+VIARULE Via3_0 GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_0
+
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_HV_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_5LM_1TM_11K_9t_tech.lef b/tech/gf180mcu_5LM_1TM_11K_9t_tech.lef
new file mode 100755
index 0000000..cde7842
--- /dev/null
+++ b/tech/gf180mcu_5LM_1TM_11K_9t_tech.lef
@@ -0,0 +1,1286 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 5LM_1TM_11K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 
+# horizontal: Metal1 Metal3 Metal5
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+LAYER Via4
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via4
+
+
+
+LAYER Metal5
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.5 ;
+    ACCURRENTDENSITY AVERAGE 2.2 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 1.19 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal5
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via3_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_HH 
+ 
+ VIA Via3_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_HV 
+ 
+ VIA Via3_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_VH 
+ 
+ VIA Via3_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_VV 
+ 
+ VIA Via3_2CUT_H
+ LAYER Via3 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via3_2CUT_H
+ 
+ VIA Via3_2CUT_V
+ LAYER Via3 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via3_2CUT_V
+ 
+ VIA Via3_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_0_60_10_60_H_H 
+ 
+ VIA Via3_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_0_60_10_60_H_V 
+ 
+ VIA Via3_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_0_60_10_60_V_H 
+ 
+ VIA Via3_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_HV_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via4 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via4_HH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_HH 
+ 
+ VIA Via4_HV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via4_HV 
+ 
+ VIA Via4_VH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_VH 
+ 
+ VIA Via4_VV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via4_VV 
+ 
+ VIA Via4_2CUT_H
+ LAYER Via4 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via4_2CUT_H
+ 
+ VIA Via4_2CUT_V
+ LAYER Via4 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via4_2CUT_V
+ 
+ VIA Via4_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via4_2X2_10_60_10_60_H_H 
+ 
+ VIA Via4_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via4_2X2_10_60_10_60_H_V 
+ 
+ VIA Via4_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via4_2X2_10_60_10_60_V_H 
+ 
+ VIA Via4_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via4_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via4_GEN_HH GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_HH
+
+VIARULE Via4_GEN_HV GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_HV
+
+VIARULE Via4_GEN_VH GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_VH
+
+VIARULE Via4_GEN_VV GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_VV
+
+ VIA Via4_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via4_4X4H_HH_DEFAULT 
+ 
+ VIA Via4_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via4_4X4H_HV_DEFAULT 
+ 
+ VIA Via4_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via4_4X4H_VH_DEFAULT 
+ 
+ VIA Via4_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via4_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_5LM_1TM_9K_9t_tech.lef b/tech/gf180mcu_5LM_1TM_9K_9t_tech.lef
new file mode 100755
index 0000000..2f6d50d
--- /dev/null
+++ b/tech/gf180mcu_5LM_1TM_9K_9t_tech.lef
@@ -0,0 +1,1347 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 5LM_1TM_9K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 
+# horizontal: Metal1 Metal3 Metal5
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+LAYER Via4
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+ # ENCLOSURE ABOVE 0.01 0.09 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via4
+
+
+
+LAYER Metal5
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.21 ;
+    ACCURRENTDENSITY AVERAGE 1.82 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 0.99 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal5
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via3_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_HH 
+ 
+ VIA Via3_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_HV 
+ 
+ VIA Via3_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_VH 
+ 
+ VIA Via3_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_VV 
+ 
+ VIA Via3_2CUT_H
+ LAYER Via3 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via3_2CUT_H
+ 
+ VIA Via3_2CUT_V
+ LAYER Via3 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via3_2CUT_V
+ 
+ VIA Via3_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_0_60_10_60_H_H 
+ 
+ VIA Via3_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_0_60_10_60_H_V 
+ 
+ VIA Via3_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_0_60_10_60_V_H 
+ 
+ VIA Via3_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_HV_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via4 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via4_HH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_HH 
+ 
+ VIA Via4_HV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via4_HV 
+ 
+ VIA Via4_VH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_VH 
+ 
+ VIA Via4_VV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via4_VV 
+ 
+ VIA Via4_1_HH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_1_HH 
+ 
+ VIA Via4_1_HV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via4_1_HV 
+ 
+ VIA Via4_1_VH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_1_VH 
+ 
+ VIA Via4_1_VV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via4_1_VV 
+ 
+ VIA Via4_2CUT_H
+ LAYER Via4 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via4_2CUT_H
+ 
+ VIA Via4_2CUT_V
+ LAYER Via4 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via4_2CUT_V
+ 
+ VIA Via4_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via4_2X2_10_60_10_60_H_H 
+ 
+ VIA Via4_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via4_2X2_10_60_10_60_H_V 
+ 
+ VIA Via4_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via4_2X2_10_60_10_60_V_H 
+ 
+ VIA Via4_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via4_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via4_GEN_HH GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_HH
+
+VIARULE Via4_GEN_HV GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_HV
+
+VIARULE Via4_GEN_VH GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_VH
+
+VIARULE Via4_GEN_VV GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_VV
+
+VIARULE Via4_0_RULE GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_0_RULE
+
+VIARULE Via4_0 GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_0
+
+ VIA Via4_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via4_4X4H_HH_DEFAULT 
+ 
+ VIA Via4_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via4_4X4H_HV_DEFAULT 
+ 
+ VIA Via4_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via4_4X4H_VH_DEFAULT 
+ 
+ VIA Via4_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via4_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY
diff --git a/tech/gf180mcu_6LM_1TM_9K_9t_tech.lef b/tech/gf180mcu_6LM_1TM_9K_9t_tech.lef
new file mode 100755
index 0000000..49c28d1
--- /dev/null
+++ b/tech/gf180mcu_6LM_1TM_9K_9t_tech.lef
@@ -0,0 +1,1645 @@
+##################################################################################
+#
+#           GLOBALFOUNDRIES
+#
+##################################################################################
+#
+# 180MCU Tech LEF File
+# based on DRM DM-000013-01 Rev 13
+# TFG-Version: 2.1.9
+# Date: February 2018
+#-------------------------------------------------------
+# metal stack option: 6LM_1TM_9K
+# Preferred routing directions:
+# vertical:   Metal2 Metal4 MetalTop 
+# horizontal: Metal1 Metal3 Metal5
+#------------------------------------------------------
+# This Techfile contains not correct Parasitic Information.
+# USE Appropriate parasitic files for Parasitic Extraction.
+#------------------------------------------------------
+
+VERSION 5.7 ;
+BUSBITCHARS "[]" ;
+DIVIDERCHAR "/" ;
+
+UNITS
+    DATABASE MICRONS 2000  ;
+    CAPACITANCE PICOFARADS 1 ;
+    CURRENT MILLIAMPS 1 ;
+    RESISTANCE OHMS 1 ;
+END UNITS
+
+PROPERTYDEFINITIONS
+  LAYER LEF58_EOLENCLOSURE STRING ;
+  LAYER LEF58_TYPE STRING ;
+END PROPERTYDEFINITIONS
+
+MANUFACTURINGGRID 0.0050 ;
+CLEARANCEMEASURE EUCLIDEAN ;
+USEMINSPACING OBS ON ;
+
+LAYER Poly2
+    TYPE MASTERSLICE ;
+END Poly2
+
+LAYER CON
+    TYPE CUT ;
+END CON
+
+
+
+LAYER Metal1
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.230 ;                   # Mn.1  (n=1)
+    WIDTH 0.230 ;                      # Mn.1  (n=1)
+    SPACING 0.230  ;                   # Mn.2a (n=1)
+    SPACING 0.300 RANGE 10.005 999.00 ; # Mn.2b
+    AREA 0.1444 ;                      # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNASIDEAREARATIO 400 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal1
+
+
+LAYER Via1
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.00 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+  PROPERTY LEF58_EOLENCLOSURE "
+  	EOLENCLOSURE 0.34 0.06 ;" ; 
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via1
+
+
+LAYER Metal2
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal2
+
+
+LAYER Via2
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via2
+
+
+LAYER Metal3
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal3
+
+
+LAYER Via3
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via3
+
+
+LAYER Metal4
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal4
+
+
+LAYER Via4
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via4
+
+
+LAYER Metal5
+    TYPE ROUTING ;
+    DIRECTION HORIZONTAL ;
+
+    PITCH 0.56 ;
+    OFFSET 0.0 ;  
+
+    MINWIDTH 0.280 ;
+    WIDTH 0.280 ;                        # Mn.1  (n>1)
+    SPACING 0.280 ;                      # Mn.2a (n>1)
+    SPACING 0.300 RANGE 10.005 999.00 ;  # Mn.2b
+    AREA 0.1444 ;                        # Mn.3
+
+    THICKNESS 0.54 ;
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    DCCURRENTDENSITY AVERAGE 0.67 ;
+    ACCURRENTDENSITY AVERAGE 1.00 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+    RESISTANCE RPERSQ 0.090000 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END Metal5
+
+
+LAYER Via5
+  TYPE CUT ;
+  SPACING 0.26 ;
+  WIDTH   0.26 ;
+
+  ENCLOSURE BELOW 0.01 0.06 ;
+ # ENCLOSURE ABOVE 0.01 0.09 ;
+  ENCLOSURE ABOVE 0.01 0.06 ;
+
+  # a bit conservative for Vn.3/4a without considering the protrusion length of 0.28
+  PROPERTY LEF58_EOLENCLOSURE " EOLENCLOSURE 0.34 0.06 ; " ;
+
+  ARRAYSPACING CUTSPACING 0.36 ARRAYCUTS 4 SPACING 0.36 ; # Vn.2b
+
+  ACCURRENTDENSITY AVERAGE 0.28 ;
+  DCCURRENTDENSITY AVERAGE 0.18 ;
+  ANTENNAMODEL OXIDE1 ;
+  ANTENNAAREARATIO 20.0 ;
+END Via5
+
+
+
+LAYER MetalTop
+    TYPE ROUTING ;
+    DIRECTION VERTICAL ;
+
+    OFFSET 0.0 ;  
+
+
+    PITCH 0.9 ;
+    MINWIDTH 0.440 ;
+    WIDTH   0.440 ;                      # MT.1
+    AREA    0.5625 ;                     # MT.4
+    SPACING 0.460 ;                      # MT.2a
+    SPACING 0.600 RANGE 10.005 999.00 ;  # MT.2b
+
+    DCCURRENTDENSITY AVERAGE 1.21 ;
+    ACCURRENTDENSITY AVERAGE 1.82 ;
+    RESISTANCE RPERSQ 0.04000 ;
+
+    THICKNESS 0.99 ;
+
+    ANTENNAMODEL OXIDE1 ;
+    ANTENNADIFFSIDEAREARATIO 400 ;
+    ANTENNAGATEPLUSDIFF 2 ;
+
+    CAPACITANCE CPERSQDIST 0.0000394 ;
+
+    MINIMUMDENSITY 30.0 ;
+    DENSITYCHECKWINDOW 200.0 200.0 ;
+    DENSITYCHECKSTEP 100.0 ;
+
+END MetalTop
+
+
+
+LAYER OVERLAP
+  TYPE OVERLAP ;
+END OVERLAP
+
+LAYER PR_bndry
+    TYPE MASTERSLICE ;
+END PR_bndry
+
+
+#------------------------------------------------------------
+#  Via1 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via1_HH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_HH 
+ 
+ VIA Via1_HV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.130 0.190 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_HV 
+ 
+ VIA Via1_VH  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via1_VH 
+ 
+ VIA Via1_VV  DEFAULT
+ LAYER Via1 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.130 -0.190 0.130 0.190 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via1_VV 
+ 
+ VIA Via1_2CUT_H
+ LAYER Via1 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via1_2CUT_H
+ 
+ VIA Via1_2CUT_V
+ LAYER Via1 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via1_2CUT_V
+ 
+ VIA Via1_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_H_H 
+ 
+ VIA Via1_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_H_V 
+ 
+ VIA Via1_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via1_2X2_0_60_10_60_V_H 
+ 
+ VIA Via1_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via1 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal1 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal2 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via1_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via1_GEN_HH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HH
+
+VIARULE Via1_GEN_HV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.060 0.000 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_HV
+
+VIARULE Via1_GEN_VH GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VH
+
+VIARULE Via1_GEN_VV GENERATE
+  LAYER Metal1 ;
+    ENCLOSURE 0.000 0.060 ;
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via1 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via1_GEN_VV
+
+ VIA Via1_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_HH_DEFAULT 
+ 
+ VIA Via1_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.120 -1.060 1.120 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_HV_DEFAULT 
+ 
+ VIA Via1_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via1_4X4H_VH_DEFAULT 
+ 
+ VIA Via1_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via1 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal1 ;
+ RECT -1.060 -1.120 1.060 1.120 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via1_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via2 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via2_HH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_HH 
+ 
+ VIA Via2_HV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_HV 
+ 
+ VIA Via2_VH  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via2_VH 
+ 
+ VIA Via2_VV  DEFAULT
+ LAYER Via2 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via2_VV 
+ 
+ VIA Via2_2CUT_H
+ LAYER Via2 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via2_2CUT_H
+ 
+ VIA Via2_2CUT_V
+ LAYER Via2 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via2_2CUT_V
+ 
+ VIA Via2_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_H_H 
+ 
+ VIA Via2_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_H_V 
+ 
+ VIA Via2_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via2_2X2_0_60_10_60_V_H 
+ 
+ VIA Via2_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via2 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal2 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal3 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via2_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via2_GEN_HH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HH
+
+VIARULE Via2_GEN_HV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_HV
+
+VIARULE Via2_GEN_VH GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VH
+
+VIARULE Via2_GEN_VV GENERATE
+  LAYER Metal2 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via2 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via2_GEN_VV
+
+ VIA Via2_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_HH_DEFAULT 
+ 
+ VIA Via2_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_HV_DEFAULT 
+ 
+ VIA Via2_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via2_4X4H_VH_DEFAULT 
+ 
+ VIA Via2_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via2 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal2 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via2_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via3 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via3_HH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_HH 
+ 
+ VIA Via3_HV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_HV 
+ 
+ VIA Via3_VH  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via3_VH 
+ 
+ VIA Via3_VV  DEFAULT
+ LAYER Via3 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via3_VV 
+ 
+ VIA Via3_2CUT_H
+ LAYER Via3 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.130 0.450 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via3_2CUT_H
+ 
+ VIA Via3_2CUT_V
+ LAYER Via3 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.190 -0.390 0.190 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via3_2CUT_V
+ 
+ VIA Via3_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_0_60_10_60_H_H 
+ 
+ VIA Via3_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_0_60_10_60_H_V 
+ 
+ VIA Via3_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via3_2X2_0_60_10_60_V_H 
+ 
+ VIA Via3_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via3 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal3 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal4 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via3_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via3_GEN_HH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HH
+
+VIARULE Via3_GEN_HV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_HV
+
+VIARULE Via3_GEN_VH GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VH
+
+VIARULE Via3_GEN_VV GENERATE
+  LAYER Metal3 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via3 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via3_GEN_VV
+
+ VIA Via3_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_HH_DEFAULT 
+ 
+ VIA Via3_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_HV_DEFAULT 
+ 
+ VIA Via3_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via3_4X4H_VH_DEFAULT 
+ 
+ VIA Via3_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via3 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal3 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via3_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via4 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via4_HH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_HH 
+ 
+ VIA Via4_HV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via4_HV 
+ 
+ VIA Via4_VH  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via4_VH 
+ 
+ VIA Via4_VV  DEFAULT
+ LAYER Via4 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via4_VV 
+ 
+ VIA Via4_2CUT_H
+ LAYER Via4 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal4 ;
+ RECT -0.390 -0.190 0.390 0.190 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ END Via4_2CUT_H
+ 
+ VIA Via4_2CUT_V
+ LAYER Via4 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.130 -0.450 0.130 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ END Via4_2CUT_V
+ 
+ VIA Via4_2X2_0_60_10_60_H_H  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via4_2X2_0_60_10_60_H_H 
+ 
+ VIA Via4_2X2_0_60_10_60_H_V  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.450 -0.390 0.450 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via4_2X2_0_60_10_60_H_V 
+ 
+ VIA Via4_2X2_0_60_10_60_V_H  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via4_2X2_0_60_10_60_V_H 
+ 
+ VIA Via4_2X2_0_60_10_60_V_V  DEFAULT
+ LAYER Via4 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal4 ;
+ RECT -0.390 -0.450 0.390 0.450 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via4_2X2_0_60_10_60_V_V 
+ 
+VIARULE Via4_GEN_HH GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_HH
+
+VIARULE Via4_GEN_HV GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_HV
+
+VIARULE Via4_GEN_VH GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_VH
+
+VIARULE Via4_GEN_VV GENERATE
+  LAYER Metal4 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via4 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via4_GEN_VV
+
+ VIA Via4_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via4_4X4H_HH_DEFAULT 
+ 
+ VIA Via4_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via4_4X4H_HV_DEFAULT 
+ 
+ VIA Via4_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via4_4X4H_VH_DEFAULT 
+ 
+ VIA Via4_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via4 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal4 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via4_4X4H_VV_DEFAULT 
+ 
+#------------------------------------------------------------
+#  Via5 VIA SECTION 
+#------------------------------------------------------------
+ VIA Via5_HH  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER MetalTop ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via5_HH 
+ 
+ VIA Via5_HV  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER MetalTop ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via5_HV 
+ 
+ VIA Via5_VH  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER MetalTop ;
+ RECT -0.220 -0.140 0.220 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via5_VH 
+ 
+ VIA Via5_VV  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER MetalTop ;
+ RECT -0.140 -0.220 0.140 0.220 ;
+ RESISTANCE 4.500 ;
+ END Via5_VV 
+ 
+ VIA Via5_1_HH  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER MetalTop ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via5_1_HH 
+ 
+ VIA Via5_1_HV  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ LAYER MetalTop ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via5_1_HV 
+ 
+ VIA Via5_1_VH  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER MetalTop ;
+ RECT -0.190 -0.140 0.190 0.140 ;
+ RESISTANCE 4.500 ;
+ END Via5_1_VH 
+ 
+ VIA Via5_1_VV  DEFAULT
+ LAYER Via5 ;
+ RECT -0.130 -0.130 0.130 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ LAYER MetalTop ;
+ RECT -0.140 -0.190 0.140 0.190 ;
+ RESISTANCE 4.500 ;
+ END Via5_1_VV 
+ 
+ VIA Via5_2CUT_H
+ LAYER Via5 ;
+ RECT -0.390 -0.130 -0.130 0.130 ;
+ RECT 0.130 -0.130 0.390 0.130 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.140 0.450 0.140 ;
+ LAYER MetalTop ;
+ RECT -0.400 -0.190 0.400 0.190 ;
+ END Via5_2CUT_H
+ 
+ VIA Via5_2CUT_V
+ LAYER Via5 ;
+ RECT -0.130 -0.390 0.130 -0.130 ;
+ RECT -0.130 0.130 0.130 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.190 -0.400 0.190 0.400 ;
+ LAYER MetalTop ;
+ RECT -0.140 -0.450 0.140 0.450 ;
+ END Via5_2CUT_V
+ 
+ VIA Via5_2X2_10_60_10_60_H_H  DEFAULT
+ LAYER Via5 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER MetalTop ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via5_2X2_10_60_10_60_H_H 
+ 
+ VIA Via5_2X2_10_60_10_60_H_V  DEFAULT
+ LAYER Via5 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ LAYER MetalTop ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via5_2X2_10_60_10_60_H_V 
+ 
+ VIA Via5_2X2_10_60_10_60_V_H  DEFAULT
+ LAYER Via5 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER MetalTop ;
+ RECT -0.450 -0.400 0.450 0.400 ;
+ END Via5_2X2_10_60_10_60_V_H 
+ 
+ VIA Via5_2X2_10_60_10_60_V_V  DEFAULT
+ LAYER Via5 ;
+ RECT -0.390 -0.390 -0.130 -0.130 ;
+ RECT 0.130 -0.390 0.390 -0.130 ;
+ RECT -0.390 0.130 -0.130 0.390 ;
+ RECT 0.130 0.130 0.390 0.390 ;
+ LAYER Metal5 ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ LAYER MetalTop ;
+ RECT -0.400 -0.450 0.400 0.450 ;
+ END Via5_2X2_10_60_10_60_V_V 
+ 
+VIARULE Via5_GEN_HH GENERATE
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER MetalTop ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via5 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via5_GEN_HH
+
+VIARULE Via5_GEN_HV GENERATE
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER MetalTop ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via5 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via5_GEN_HV
+
+VIARULE Via5_GEN_VH GENERATE
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER MetalTop ;
+    ENCLOSURE 0.090 0.010 ;
+  LAYER Via5 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via5_GEN_VH
+
+VIARULE Via5_GEN_VV GENERATE
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER MetalTop ;
+    ENCLOSURE 0.010 0.090 ;
+  LAYER Via5 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via5_GEN_VV
+
+VIARULE Via5_0_RULE GENERATE
+  LAYER Metal5 ;
+    ENCLOSURE 0.060 0.010 ;
+  LAYER MetalTop ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via5 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via5_0_RULE
+
+VIARULE Via5_0 GENERATE
+  LAYER Metal5 ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER MetalTop ;
+    ENCLOSURE 0.010 0.060 ;
+  LAYER Via5 ;
+    RECT -0.130 -0.130 0.130 0.130 ;
+    SPACING 0.520 BY 0.520 ;
+END Via5_0
+
+ VIA Via5_4X4H_HH_DEFAULT  DEFAULT
+ LAYER Via5 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER MetalTop ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via5_4X4H_HH_DEFAULT 
+ 
+ VIA Via5_4X4H_HV_DEFAULT  DEFAULT
+ LAYER Via5 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal5 ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ LAYER MetalTop ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via5_4X4H_HV_DEFAULT 
+ 
+ VIA Via5_4X4H_VH_DEFAULT  DEFAULT
+ LAYER Via5 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER MetalTop ;
+ RECT -1.120 -1.070 1.120 1.070 ;
+ END Via5_4X4H_VH_DEFAULT 
+ 
+ VIA Via5_4X4H_VV_DEFAULT  DEFAULT
+ LAYER Via5 ;
+ RECT -1.060 -1.060 -0.800 -0.800 ;
+ RECT -0.440 -1.060 -0.180 -0.800 ;
+ RECT 0.180 -1.060 0.440 -0.800 ;
+ RECT 0.800 -1.060 1.060 -0.800 ;
+ RECT -1.060 -0.440 -0.800 -0.180 ;
+ RECT -0.440 -0.440 -0.180 -0.180 ;
+ RECT 0.180 -0.440 0.440 -0.180 ;
+ RECT 0.800 -0.440 1.060 -0.180 ;
+ RECT -1.060 0.180 -0.800 0.440 ;
+ RECT -0.440 0.180 -0.180 0.440 ;
+ RECT 0.180 0.180 0.440 0.440 ;
+ RECT 0.800 0.180 1.060 0.440 ;
+ RECT -1.060 0.800 -0.800 1.060 ;
+ RECT -0.440 0.800 -0.180 1.060 ;
+ RECT 0.180 0.800 0.440 1.060 ;
+ RECT 0.800 0.800 1.060 1.060 ;
+ LAYER Metal5 ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ LAYER MetalTop ;
+ RECT -1.070 -1.120 1.070 1.120 ;
+ END Via5_4X4H_VV_DEFAULT 
+ 
+
+END LIBRARY