blob: dfc56411e2b8fca17cb4c3216c22c4349d0de4ab [file] [log] [blame]
// Copyright 2022 GlobalFoundries PDK Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
module gf180mcu_fd_sc_mcu7t5v0__oai22_4( B2, B1, ZN, A2, A1 );
input A1, A2, B1, B2;
output ZN;
`ifdef FUNCTIONAL // functional //
gf180mcu_fd_sc_mcu7t5v0__oai22_4_func gf180mcu_fd_sc_mcu7t5v0__oai22_4_behav_inst(.B2(B2),.B1(B1),.ZN(ZN),.A2(A2),.A1(A1));
`else
gf180mcu_fd_sc_mcu7t5v0__oai22_4_func gf180mcu_fd_sc_mcu7t5v0__oai22_4_inst(.B2(B2),.B1(B1),.ZN(ZN),.A2(A2),.A1(A1));
// spec_gates_begin
// spec_gates_end
specify
// specify_block_begin
if(B1===1'b0 && B2===1'b1)
// comb arc A1 --> ZN
(A1 => ZN) = (1.0,1.0);
if(B1===1'b1 && B2===1'b0)
// comb arc A1 --> ZN
(A1 => ZN) = (1.0,1.0);
if(B1===1'b1 && B2===1'b1)
// comb arc A1 --> ZN
(A1 => ZN) = (1.0,1.0);
ifnone
// comb arc A1 --> ZN
(A1 => ZN) = (1.0,1.0);
if(B1===1'b0 && B2===1'b1)
// comb arc A2 --> ZN
(A2 => ZN) = (1.0,1.0);
if(B1===1'b1 && B2===1'b0)
// comb arc A2 --> ZN
(A2 => ZN) = (1.0,1.0);
if(B1===1'b1 && B2===1'b1)
// comb arc A2 --> ZN
(A2 => ZN) = (1.0,1.0);
ifnone
// comb arc A2 --> ZN
(A2 => ZN) = (1.0,1.0);
if(A1===1'b0 && A2===1'b1)
// comb arc B1 --> ZN
(B1 => ZN) = (1.0,1.0);
if(A1===1'b1 && A2===1'b0)
// comb arc B1 --> ZN
(B1 => ZN) = (1.0,1.0);
if(A1===1'b1 && A2===1'b1)
// comb arc B1 --> ZN
(B1 => ZN) = (1.0,1.0);
ifnone
// comb arc B1 --> ZN
(B1 => ZN) = (1.0,1.0);
if(A1===1'b0 && A2===1'b1)
// comb arc B2 --> ZN
(B2 => ZN) = (1.0,1.0);
if(A1===1'b1 && A2===1'b0)
// comb arc B2 --> ZN
(B2 => ZN) = (1.0,1.0);
if(A1===1'b1 && A2===1'b1)
// comb arc B2 --> ZN
(B2 => ZN) = (1.0,1.0);
ifnone
// comb arc B2 --> ZN
(B2 => ZN) = (1.0,1.0);
// specify_block_end
endspecify
`endif
endmodule