# Copyright 2022 GlobalFoundries PDK Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#===========================================================================================================================
#------------------------------------------- GF 0.18um MCU LVS RULE DECK --------------------------------------------------
#===========================================================================================================================

require 'time'
require "logger"

exec_start_time = Time.now

logger = Logger.new(STDOUT)

logger.formatter = proc do |severity, datetime, progname, msg|
  "#{datetime}: Memory Usage (" + `pmap #{Process.pid} | tail -1`[10,40].strip + ") : #{msg}
"
end

#================================================
#----------------- FILE SETUP -------------------
#================================================

logger.info("Starting running GF180MCU Klayout LVS runset on %s" % [$input])

#=== GET LAYOUT ===
if $input
  source($input)
  logger.info("Layout file: #{$input}")
else
  logger.info("No layout loaded, please add your layout file")
end

#=== GET THREADS ===
if $thr
  threads($thr)
  logger.info("Number of threads: #{$thr}")
else
  threads(16)
  logger.info("Number of threads: 16")
end

#=== GET REPORT ===
if $report
  report_lvs($report)
  logger.info("Final report: #{$report}")
else
  report_lvs(source.cell_name+".lvsdb")
  logger.info("Final report: #{source.cell_name}.lvsdb")
end

#=== GET SUBSTRATE NAME ===
if $lvs_sub
  substrate_name = $lvs_sub
  logger.info("Substrate name: #{$lvs_sub}")
else
  substrate_name = "gf180mcu_gnd"
  logger.info("No substrate name given, default name is gf180mcu_gnd")
end

#=== NET NAMES OPTION ===
# true: use net names instead of numbers
# false: use numbers for nets
if $spice_net_names == "true"
  spice_with_net_names = true
  logger.info("Extracted netlist with net names: #{$spice_net_names}")
else
  spice_with_net_names = true
  logger.info("Extracted netlist with net names: true")
end

#=== COMMENTS OPTION ===
# true: put in comments with details
# false: no comments
if $spice_comments == "true"
  spice_with_comments = true
  logger.info("Extracted netlist with comments in details: #{$spice_comments}")
else
  spice_with_comments = false
  logger.info("Extracted netlist with comments in details: false")
end

if $target_netlist
  target_netlist($target_netlist)
  logger.info("Extracted netlist file: #{$target_netlist}")
else
  target_netlist(File.join(File.dirname(RBA::CellView::active.filename), source.cell_name+"_extracted.cir"), write_spice(spice_with_net_names, spice_with_comments),  "Extracted by KLayout with GF180 LVS runset on : #{Time.now.strftime("%d/%m/%Y %H:%M")}")
  logger.info("Extracted netlist file: #{source.cell_name}_extracted.cir")
end

#=== EXTRACTION SCALE ===
if $scale  == "true"
  device_scaling(1000000)
  logger.info("device_scaling: true")
else
  logger.info("device_scaling: false")
end

#=== PRINT DETAILS ===
if $verbose == "true"
  logger.info("Verbose mode: #{$verbose}")
  verbose(true)
else
  verbose(false)
  logger.info("Verbose mode: false")
end

# === TILING MODE ===
if $run_mode == "tiling"
  # use a tile size of 1mm - not used in deep mode-
  # tiles(500.um)
  # use a tile border of 10 micron:
  # tile_borders(10.um)
  tiles(1000)
  logger.info("Tiling  mode is enabled.")

elsif $run_mode == "deep"
  #=== HIER MODE ===
  deep
  logger.info("deep  mode is enabled.")

elsif $run_mode == "flat"
  #=== FLAT MODE ===
  flat
  logger.info("flat  mode is enabled.")

else
  #=== FLAT MODE ===
  flat
  logger.info("flat  mode is enabled.")

end # run_mode


#================================================
# --------------- CUSTOM CLASSES ----------------
#================================================

#====================== CUSTOM READER =========================
class SubcircuitModelsReader < RBA::NetlistSpiceReaderDelegate

  def parse_element(s, element)
    if element == "C"
      super(s + " C=2e-16", element)
    else
      super
    end
  end

  # implements the delegate interface:
  # take and translate the element
  def element(circuit, el, name, model, value, nets, params)

    if el == "C"
      if nets.size != 2
        error("Capacitor needs two nodes")
      end

      # provide a device class
      cls = circuit.netlist.device_class_by_name(model)
      if ! cls
        cls = RBA::DeviceClassCapacitor::new
        cls.name = model
        circuit.netlist.add(cls)
      end

      # create a device
      device = circuit.create_device(cls, name)

      # and configure the device
      [ "A", "B" ].each_with_index do |t,index|
        device.connect_terminal(t, nets[index])
      end

      # parameters in the model are given in micrometer units, so
      # we need to translate the parameter values from SI to um values:
      device.set_parameter("A", ((params["W"] || 0.0) * (params["L"] || 0.0)) * 1e12)
      device.set_parameter("P", ((params["W"] || 0.0) + (params["L"] || 0.0)) * 2e6)
      device.set_parameter("C", (params["C"] || 0.0))

    elsif el == "R"
      if nets.size == 3
        # provide a device class
        cls = circuit.netlist.device_class_by_name(model)
        if ! cls
          cls = RBA::DeviceClassResistorWithBulk::new
          cls.name = model
          circuit.netlist.add(cls)
        end

        # create a device
        device = circuit.create_device(cls, name)

        # and configure the device
        [ "A", "B", "W" ].each_with_index do |t,index|
          device.connect_terminal(t, nets[index])
        end

      elsif nets.size == 2
        # provide a device class
        cls = circuit.netlist.device_class_by_name(model)
        if ! cls
          cls = RBA::DeviceClassResistor::new
          cls.name = model
          circuit.netlist.add(cls)
        end

        # create a device
        device = circuit.create_device(cls, name)

        # and configure the device
        [ "A", "B" ].each_with_index do |t,index|
          device.connect_terminal(t, nets[index])
        end

      else
        error("Resistor needs two or three nodes")

      end

      # parameters in the model are given in micrometer units, so
      # we need to translate the parameter values from SI to um values:
      device.set_parameter("W", ((params["W"] || 0.0) * (params["PAR"] || 1.0)) * 1e6)
      device.set_parameter("L", ((params["L"] || 0.0) * (params["S"] || 1.0)) * 1e6)
      device.set_parameter("R", (params["R"] * (params["S"] || 1.0) / (params["PAR"] || 1.0)))

    else
      return super

    end
    return true

  end

end

# Instantiate a reader using the new delegate
reader = RBA::NetlistSpiceReader::new(SubcircuitModelsReader::new)

#=== GET NETLIST ===
if $schematic
  schematic($schematic, reader)
  logger.info("Netlist file: #{$schematic}")
else
  puts "No schematic loaded , please add your netlist file"
  logger.info("No schematic loaded , please add your netlist file")
end

class BResistor < RBA::DeviceClassResistorWithBulk
  def initialize
    super
    enable_parameter("R", false)
    enable_parameter("W", true)
    enable_parameter("L", true)
  end
end

class NResistor < RBA::DeviceClassResistor
  def initialize
    super
    enable_parameter("R", false)
    enable_parameter("W", true)
    enable_parameter("L", true)
  end
end

class MosCap < RBA::DeviceClassCapacitor
  def initialize
    super
    enable_parameter("C", false)
    enable_parameter("A", true)
    enable_parameter("P", true)
  end
end

class MIMCap < RBA::DeviceClassCapacitor
  def initialize
    super
    enable_parameter("C", true)
    enable_parameter("A", true)
    enable_parameter("P", true)
  end
end

#================================================
#------------- LAYERS DERIVATIONS ---------------
#================================================

logger.info("Read in polygons from layers.")

#=== DRAWINGS ===
comp           = polygons(22 , 0 )
dnwell         = polygons(12 , 0 )
nwell          = polygons(21 , 0 )
lvpwell        = polygons(204, 0 )
dualgate       = polygons(55 , 0 )
poly2          = polygons(30 , 0 )
nplus          = polygons(32 , 0 )
pplus          = polygons(31 , 0 )
sab            = polygons(49 , 0 )
esd            = polygons(24 , 0 )
contact        = polygons(33 , 0 )
metal1         = polygons(34 , 0 )
via1           = polygons(35 , 0 )
metal2         = polygons(36 , 0 )
via2           = polygons(38 , 0 )
metal3         = polygons(42 , 0 )
via3           = polygons(40 , 0 )
metal4         = polygons(46 , 0 )
via4           = polygons(41 , 0 )
metal5         = polygons(81 , 0 )
via5           = polygons(82 , 0 )
metaltop       = polygons(53 , 0 )
pad            = polygons(37 , 0 )
resistor       = polygons(62 , 0 )
fhres          = polygons(227, 0 )
fusetop        = polygons(75 , 0 )
fusewindow_d   = polygons(96 , 1 )
polyfuse       = polygons(220, 0 )
mvsd           = polygons(210, 0 )
mvpsd          = polygons(11 , 39)
nat            = polygons(5  , 0 )
comp_dummy     = polygons(22 , 4 )
poly2_dummy    = polygons(30 , 4 )
metal1_dummy   = polygons(34 , 4 )
metal2_dummy   = polygons(36 , 4 )
metal3_dummy   = polygons(42 , 4 )
metal4_dummy   = polygons(46 , 4 )
metal5_dummy   = polygons(81 , 4 )
metaltop_dummy = polygons(53 , 4 )
metal1_slot    = polygons(34 , 3 )
metal2_slot    = polygons(36 , 3 )
metal3_slot    = polygons(42 , 3 )
metal4_slot    = polygons(46 , 3 )
metal5_slot    = polygons(81 , 3 )
metaltop_slot  = polygons(53 , 3 )
ubmpperi       = polygons(183, 0 )
ubmparray      = polygons(184, 0 )
ubmeplate      = polygons(185, 0 )
schottky_diode = polygons(241, 0 )
zener          = polygons(178, 0 )
res_mk         = polygons(110, 5 )
opc_drc        = polygons(124, 5 )
ndmy           = polygons(111, 5 )
pmndmy         = polygons(152, 5 )
v5_xtor        = polygons(112, 1 )
cap_mk         = polygons(117, 5 )
mos_cap_mk     = polygons(166, 5 )
ind_mk         = polygons(151, 5 )
diode_mk       = polygons(115, 5 )
drc_bjt        = polygons(127, 5 )
lvs_bjt        = polygons(118, 5 )
mim_l_mk       = polygons(117, 10)
latchup_mk     = polygons(137, 5 )
guard_ring_mk  = polygons(167, 5 )
otp_mk         = polygons(173, 5 )
mtpmark        = polygons(122, 5 )
neo_ee_mk      = polygons(88 , 17)
sramcore       = polygons(108, 5 )
lvs_rf         = polygons(100, 5 )
lvs_drain      = polygons(100, 7 )
ind_mk         = polygons(151, 5 )
hvpolyrs       = polygons(123, 5 )
lvs_io         = polygons(119, 5 )
probe_mk       = polygons(13 , 17)
esd_mk         = polygons(24 , 5 )
lvs_source     = polygons(100, 8 )
well_diode_mk  = polygons(153, 51)
ldmos_xtor     = polygons(226, 0 )
plfuse         = polygons(125, 5 )
efuse_mk       = polygons(80 , 5 )
mcell_feol_mk  = polygons(11 , 17)
ymtp_mk        = polygons(86 , 17)
dev_wf_mk      = polygons(128, 17)
metal1_blk     = polygons(34 , 5 )
metal2_blk     = polygons(36 , 5 )
metal3_blk     = polygons(42 , 5 )
metal4_blk     = polygons(46 , 5 )
metal5_blk     = polygons(81 , 5 )
metalt_blk     = polygons(53 , 5 )
pr_bndry       = polygons(0  , 0 )
mdiode         = polygons(116, 5 )
metal1_res     = polygons(110, 11)
metal2_res     = polygons(110, 12)
metal3_res     = polygons(110, 13)
metal4_res     = polygons(110, 14)
metal5_res     = polygons(110, 15)
metal6_res     = polygons(110, 16)
border         = polygons(63 , 0 )

logger.info("Read in labels from layers.")

#=== LABELS ===
comp_label     = labels(22 , 10)
poly2_label    = labels(30 , 10)
metal1_label   = labels(34 , 10)
metal2_label   = labels(36 , 10)
metal3_label   = labels(42 , 10)
metal4_label   = labels(46 , 10)
metal5_label   = labels(81 , 10)
metaltop_label = labels(53 , 10)

#=== BULK LAYER ===
sub = polygon_layer

#================================================
#------------------ SWITCHES --------------------
#================================================

logger.info("Evaluate switches start.")

# METAL_TOP
if $metal_top
  METAL_TOP = $metal_top
else
  METAL_TOP = "9K"
end # METAL_TOP

logger.info("METAL_TOP Selected is %s" % [METAL_TOP])

# METAL_LEVEL
if $metal_level
  METAL_LEVEL = $metal_level
else
  METAL_LEVEL = "6LM"
end # METAL_LEVEL

logger.info("METAL_STACK Selected is %s" % [METAL_LEVEL])

if $poly_res
  POLY_RES = $poly_res
else
  POLY_RES = false
end # POLY_RES

logger.info("POLY_RES Selected is %s" % [POLY_RES])

if $mim_option
  MIM_OPTION = $mim_option
else
  MIM_OPTION = false
end # MIM_OPTION

if $mim_cap
  MIM_CAP = $mim_cap
else
  MIM_CAP = false
end # MIM_CAP

logger.info("MIM Option selected %s" % [MIM_OPTION])

if $schematic_simplify
  SCH_SIMPLE = $schematic_simplify
else
  SCH_SIMPLE = false
end # SCH_SIMPLE

logger.info("SCH_SIMPLE enabled  %s" % [SCH_SIMPLE])

if $net_only
  NET_ONLY = true
else
  NET_ONLY = false
end

logger.info("NET_ONLY enabled  %s" % [NET_ONLY])

if $top_lvl_pins
  TOP_LVL_PINS = true
else
  TOP_LVL_PINS = false
end

logger.info("TOP_LVL_PINS enabled  %s" % [TOP_LVL_PINS])


if $combine
  COMBINE = true
else
  COMBINE = false
end

logger.info("COMBINE enabled  %s" % [COMBINE])

if $purge
  PURGE = true
else
  PURGE = false
end

logger.info("PURGE enabled  %s" % [PURGE])

if $purge_nets
  PURGE_NETS = true
else
  PURGE_NETS = false
end

logger.info("PURGE_NETS enabled  %s" % [PURGE_NETS])

if $net_only || $top_lvl_pins || $combine || $purge || $purge_nets
  SIMPLIFY = false
else
  SIMPLIFY = true
end # SIMPLIFY

logger.info("SIMPLIFY enabled  %s" % [SIMPLIFY])

logger.info("Evaluate switches end.")

#================================================
#------------- METAL LEVEL SWITCHES -------------
#================================================

if METAL_LEVEL == "6LM"
  top_via       = via5
  topmin1_via   = via4
  top_metal     = metaltop
  topmin1_metal = metal5
elsif METAL_LEVEL == "5LM"
  top_via       = via4
  topmin1_via   = via3
  top_metal     = metal5
  topmin1_metal = metal4
elsif METAL_LEVEL == "4LM"
  top_via       = via3
  topmin1_via   = via2
  top_metal     = metal4
  topmin1_metal = metal3
elsif METAL_LEVEL == "3LM"
  top_via       = via2
  topmin1_via   = via1
  top_metal     = metal3
  topmin1_metal = metal2
elsif METAL_LEVEL == "2LM"
  top_via       = via1
  topmin1_via   = via1
  top_metal     = metal2
  topmin1_metal = metal1
end #METAL_LEVEL

#================================================================
#------------------------- MAIN RUNSET --------------------------
#================================================================

logger.info("GF180 LVS rules started")

#================================================
#------------- LAYERS DERIVATIONS ---------------
#================================================

logger.info("Starting deriving base layers.")

#==================================
# ------ GENERAL DERIVATIONS ------
#==================================

ncomp           = comp.and(nplus)
pcomp           = comp.and(pplus)
tgate           = poly2.and(comp).not(res_mk)

ngate           = nplus.and(tgate)
nsd             = ncomp.outside(nwell).interacting(ngate).not(ngate).not(res_mk)
ptap            = pcomp.outside(nwell).outside(dnwell).not(res_mk)

pgate           = pplus.and(tgate)
psd             = pcomp.inside(nwell).interacting(pgate).not(pgate).not(res_mk)
ntap            = ncomp.inside(nwell).not(res_mk)

ngate_dw        = ngate.and(lvpwell).and(dnwell)
ptap_dw         = pcomp.inside(lvpwell).inside(dnwell).outside(well_diode_mk).not(res_mk)

pgate_dw        = pgate.inside(dnwell).outside(lvpwell)
ntap_dw         = ncomp.outside(lvpwell).inside(dnwell).not(res_mk)

psd_dw          = pcomp.not(lvpwell).and(dnwell).interacting(pgate).not(pgate).not(res_mk)
nwell_con       = nwell.not(res_mk)
lvpwell_con     = lvpwell.not(res_mk)
poly2_con       = poly2.not(res_mk).not(plfuse)

metal1_con      = metal1.not(metal1_res)
metal2_con      = metal2.not(metal2_res)
metal3_con      = metal3.not(metal3_res)
metaltop_con    = metaltop.not(metal6_res)

#==================================
# ------ MOSFET DERIVATIONS -------
#==================================

logger.info("Starting MOSFET DERIVATIONS")

# ==============
# ---- PMOS ----
# ==============
logger.info("Starting PMOS layers DERIVATIONS")

# 3.3V PMOS transistor outside DNWELL
pgate_3p3v = pgate.not(v5_xtor).not(dualgate).not(dnwell).not(sab).not_interacting(mos_cap_mk)

# 5V PMOS transistor outside DNWELL
pgate_5v = pgate.and(v5_xtor).and(dualgate).not(dnwell).not(sab).not_interacting(mos_cap_mk)

# 6V PMOS transistor outside DNWELL
pgate_6v = pgate.not(v5_xtor).and(dualgate).not(nat).not(ldmos_xtor).not(dnwell).not(sab).not_interacting(mos_cap_mk)

# 3.3V PMOS transistor inside DNWELL
pgate_3p3v_dw = pgate_dw.not(v5_xtor).not(dualgate).not(sab).not_interacting(mos_cap_mk)

# 5V PMOS transistor inside DNWELL
pgate_5v_dw = pgate_dw.and(v5_xtor).and(dualgate).not(sab).not_interacting(mos_cap_mk)

# 6V PMOS transistor inside DNWELL
pgate_6v_dw = pgate_dw.not(v5_xtor).and(dualgate).not(nat).not(ldmos_xtor).not(sab).not_interacting(mos_cap_mk)

# LDPMOS transistor
pgate_ldmos = pgate_dw.interacting(mvpsd).not(v5_xtor).and(dualgate).and(ldmos_xtor).and(dnwell).not(mvpsd).not_interacting(mos_cap_mk)
pd_ldmos    = psd_dw.not(v5_xtor).and(dualgate).and(ldmos_xtor).and(dnwell).and(mvpsd)
ps_ldmos    = psd_dw.not(v5_xtor).and(dualgate).and(ldmos_xtor).and(dnwell).not(mvpsd)
psd_ldmos   = pcomp.not(v5_xtor).and(dualgate).and(ldmos_xtor).and(dnwell).interacting(mvpsd).sized(0.29.um).sized(-0.29.um).extents.not(pgate_ldmos)

# ==============
# ---- NMOS ----
# ==============
logger.info("Starting NMOS layers DERIVATIONS")

# 3.3V NMOS transistor outside DNWELL
ngate_3p3v = ngate.not(v5_xtor).not(dualgate).not(dnwell).not(sab).not_interacting(mos_cap_mk)

# 5V NMOS transistor outside DNWELL
ngate_5v = ngate.and(v5_xtor).and(dualgate).not(dnwell).not(sab).not_interacting(mos_cap_mk)

# 6V NMOS transistor outside DNWELL
ngate_6v = ngate.not(v5_xtor).and(dualgate).not(nat).not(ldmos_xtor).not(dnwell).not(sab).not_interacting(mos_cap_mk)

# 3.3V NMOS transistor inside DNWELL
ngate_3p3v_dw = ngate_dw.not(v5_xtor).not(dualgate).not(sab).not_interacting(mos_cap_mk)

# 5V NMOS transistor inside DNWELL
ngate_5v_dw = ngate_dw.and(v5_xtor).and(dualgate).not(sab).not_interacting(mos_cap_mk)

# 6V NMOS transistor inside DNWELL
ngate_6v_dw = ngate_dw.not(v5_xtor).and(dualgate).not(nat).not(ldmos_xtor).not(sab).not_interacting(mos_cap_mk)

# Native Vt NMOS transistor
ngate_nat = ngate.not(v5_xtor).and(dualgate).and(nat).not_interacting(mos_cap_mk)

# LDNMOS transistor
ngate_ldmos = ngate.interacting(mvsd).not(v5_xtor).and(dualgate).and(ldmos_xtor).not(dnwell).not(mvsd).not_interacting(mos_cap_mk)
nd_ldmos    = ncomp.not(ngate).not(v5_xtor).and(dualgate).and(ldmos_xtor).not(dnwell).and(mvsd)
ns_ldmos    = nsd.not(v5_xtor).and(dualgate).and(ldmos_xtor).not(dnwell).not(mvsd)
nsd_ldmos   = ncomp.not(v5_xtor).and(dualgate).and(ldmos_xtor).not(dnwell).interacting(mvsd).sized(0.37.um).sized(-0.37.um).extents.not(ngate_ldmos)

#================================
# ------ BJT DERIVATIONS --------
#================================
logger.info("Starting BJT DERIVATIONS")

# ==============
# ---- vnpn ----
# ==============
logger.info("Starting vnpn layers DERIVATIONS")

# vnpn general nodes DERIVATIONS
vnpn_e = ncomp.interacting(lvs_bjt).inside(dnwell)
vnpn_b = pcomp.and(lvpwell).inside(dnwell).inside(drc_bjt)
vnpn_c = ncomp.inside(dnwell).outside(lvs_bjt).inside(drc_bjt)

# vnpn_10x10 nodes DERIVATIONS
vnpn_10x10_e = vnpn_e.with_area(99.5.um,100.5.um).interacting(vnpn_e.edges.with_length(9.8.um,10.2.um))
vnpn_10x10_b = vnpn_b.interacting(vnpn_b.extents.interacting(vnpn_10x10_e))
vnpn_10x10_c = vnpn_c.interacting(vnpn_c.extents.interacting(vnpn_10x10_e))

# vnpn_5x5 nodes DERIVATIONS
vnpn_5x5_e = vnpn_e.with_area(24.5.um,25.5.um).interacting(vnpn_e.edges.with_length(4.8.um,5.2.um))
vnpn_5x5_b = vnpn_b.interacting(vnpn_b.extents.interacting(vnpn_5x5_e))
vnpn_5x5_c = vnpn_c.interacting(vnpn_c.extents.interacting(vnpn_5x5_e))

# vnpn_0p54x16 nodes DERIVATIONS
vnpn_0p54x16_e = vnpn_e.with_area(8.um,9.um).interacting(vnpn_e.edges.with_length(15.5.um,16.5.um))
vnpn_0p54x16_b = vnpn_b.interacting(vnpn_b.extents.interacting(vnpn_0p54x16_e))
vnpn_0p54x16_c = vnpn_c.interacting(vnpn_c.extents.interacting(vnpn_0p54x16_e))

# vnpn_0p54x8 nodes DERIVATIONS
vnpn_0p54x8_e = vnpn_e.with_area(4.um,5.um).interacting(vnpn_e.edges.with_length(7.5.um,8.5.um))
vnpn_0p54x8_b = vnpn_b.interacting(vnpn_b.extents.interacting(vnpn_0p54x8_e))
vnpn_0p54x8_c = vnpn_c.interacting(vnpn_c.extents.interacting(vnpn_0p54x8_e))

# vnpn_0p54x4 nodes DERIVATIONS
vnpn_0p54x4_e = vnpn_e.with_area(1.5.um,2.5.um).interacting(vnpn_e.edges.with_length(3.8.um,4.2.um))
vnpn_0p54x4_b = vnpn_b.interacting(vnpn_b.extents.interacting(vnpn_0p54x4_e))
vnpn_0p54x4_c = vnpn_c.interacting(vnpn_c.extents.interacting(vnpn_0p54x4_e))

# vnpn_0p54x2 nodes DERIVATIONS
vnpn_0p54x2_e = vnpn_e.with_area(0.8.um,1.5.um).interacting(vnpn_e.edges.with_length(1.8.um,2.2.um))
vnpn_0p54x2_b = vnpn_b.interacting(vnpn_b.extents.interacting(vnpn_0p54x2_e))
vnpn_0p54x2_c = vnpn_c.interacting(vnpn_c.extents.interacting(vnpn_0p54x2_e))

# ==============
# ---- vpnp ----
# ==============
logger.info("Starting vpnp layers DERIVATIONS")

# vpnp general nodes DERIVATIONS
vpnp_e = pcomp.inside(nwell).interacting(lvs_bjt)
vpnp_b = ncomp.and(nwell).inside(drc_bjt)
vpnp_c = ptap.outside(lvs_bjt).inside(drc_bjt)

# vpnp_10x10 nodes DERIVATIONS
vpnp_10x10_e = vpnp_e.with_area(99.5.um,100.5.um).interacting(vpnp_e.edges.with_length(9.8.um,10.2.um))
vpnp_10x10_b = vpnp_b.interacting(vpnp_b.extents.interacting(vpnp_10x10_e))
vpnp_10x10_c = vpnp_c.interacting(vpnp_c.extents.interacting(vpnp_10x10_e))

# vpnp_5x5 nodes DERIVATIONS
vpnp_5x5_e = vpnp_e.with_area(24.5.um,25.5.um).interacting(vpnp_e.edges.with_length(4.8.um,5.2.um))
vpnp_5x5_b = vpnp_b.interacting(vpnp_b.extents.interacting(vpnp_5x5_e))
vpnp_5x5_c = vpnp_c.interacting(vpnp_c.extents.interacting(vpnp_5x5_e))

# vpnp_0p42x10 nodes DERIVATIONS
vpnp_0p42x10_e = vpnp_e.with_area(4.um,4.5.um).interacting(vpnp_e.edges.with_length(9.8.um,10.2.um))
vpnp_0p42x10_b = vpnp_b.interacting(vpnp_b.extents.interacting(vpnp_0p42x10_e))
vpnp_0p42x10_c = vpnp_c.interacting(vpnp_c.extents.interacting(vpnp_0p42x10_e))

# vpnp_0p42x5 nodes DERIVATIONS
vpnp_0p42x5_e = vpnp_e.with_area(2.um,2.2.um).interacting(vpnp_e.edges.with_length(4.8.um,5.2.um))
vpnp_0p42x5_b = vpnp_b.interacting(vpnp_b.extents.interacting(vpnp_0p42x5_e))
vpnp_0p42x5_c = vpnp_c.interacting(vpnp_c.extents.interacting(vpnp_0p42x5_e))

#================================
# ----- DIODE DERIVATIONS -------
#================================
logger.info("Starting DIODE DERIVATIONS")

# np_3p3 diode
np_3p3_terminal_n = ncomp.not(v5_xtor).not(dualgate).outside(dnwell).interacting(diode_mk)

# np_3p3_dw diode
np_3p3_dw_terminal_n = ncomp.not(v5_xtor).not(dualgate).inside(dnwell).interacting(diode_mk)

# np_6p0 diode
np_6p0_terminal_n = ncomp.and(dualgate).outside(dnwell).interacting(diode_mk)

# np_6p0_dw diode
np_6p0_dw_terminal_n = ncomp.and(dualgate).inside(dnwell).interacting(diode_mk)

# pn_3p3 diode
pn_3p3_terminal_p = pcomp.not(v5_xtor).not(dualgate).outside(dnwell).interacting(diode_mk)

# pn_3p3_dw diode
pn_3p3_dw_terminal_p = pcomp.not(v5_xtor).not(dualgate).inside(dnwell).interacting(diode_mk)

# pn_6p0 diode
pn_6p0_terminal_p = pcomp.and(dualgate).outside(dnwell).interacting(diode_mk)

# pn_6p0_dw diode
pn_6p0_dw_terminal_p = pcomp.and(dualgate).inside(dnwell).interacting(diode_mk)

# nwp_3p3 diode
nwp_3p3_terminal_p = pcomp.not(v5_xtor).not(dualgate).outside(dnwell).interacting(well_diode_mk)
nwp_3p3_terminal_n = well_diode_mk.not(v5_xtor).not(dualgate).covering(nwell)

# nwp_6p0 diode
nwp_6p0_terminal_p = pcomp.and(dualgate).outside(dnwell).interacting(well_diode_mk)
nwp_6p0_terminal_n = well_diode_mk.and(dualgate).covering(nwell)

# dnwpw_3p3 diode
dnwpw_3p3_terminal_p = lvpwell.not(v5_xtor).not(dualgate).interacting(well_diode_mk)

# dnwpw_6p0 diode
dnwpw_6p0_terminal_p = lvpwell.and(dualgate).interacting(well_diode_mk)

# dnwps_3p3 diode
dnwps_3p3_terminal_p = ptap.extents.not_interacting(lvpwell).not_covering(v5_xtor).not_covering(dualgate).interacting(well_diode_mk)

# dnwps_6p0 diode
dnwps_6p0_terminal_p = ptap.extents.not_interacting(lvpwell).covering(dualgate).interacting(well_diode_mk)

# sc_diode diode
sc_diode_terminal_n = ncomp.inside(dnwell).inside(schottky_diode)
sc_diode_terminal_p = metal1.inside(dnwell).not_interacting(sc_diode_terminal_n)

#================================
# ---- RESISTOR DERIVATIONS -----
#================================
logger.info("Starting RESISTOR DERIVATIONS")

# ===============
# --DIFF & WELL--
# ===============

# NPLUS_U
nplus_u_layer     = ncomp.and(lvpwell).and(sab).and(res_mk).not(dnwell)
nplus_cont        = ncomp.outside(nwell).not_interacting(ngate).interacting(res_mk).not(res_mk)

# NPLUS_U_DW
nplus_u_dw_layer = ncomp.and(lvpwell).and(sab).and(res_mk).and(dnwell)

# PPLUS_U
pplus_u_layer = pcomp.and(nwell).and(sab).and(res_mk).not(dnwell)
pplus_cont    = pcomp.inside(nwell).not_interacting(pgate).interacting(res_mk).not(res_mk)

# PPLUS_U_DW
pplus_u_dw_layer = pcomp.and(sab).and(res_mk).and(dnwell)
pplus_dw_cont    = pcomp.not(lvpwell).and(dnwell).not_interacting(pgate).interacting(res_mk).not(res_mk)

# NPLUS_S
nplus_s_layer = ncomp.and(lvpwell).and(res_mk).not_interacting(sab).not(dnwell)

# NPLUS_S_DW
nplus_s_dw_layer = ncomp.and(lvpwell).and(res_mk).and(dnwell).not_interacting(sab)

# PPLUS_S
pplus_s_layer = pcomp.and(nwell).and(res_mk).not_interacting(sab).not(dnwell)

# PPLUS_S_DW
pplus_s_dw_layer = pcomp.not_interacting(sab).and(res_mk).and(dnwell).not_interacting(sab)

# NWELL
nwell_res = nwell.and(res_mk).not(dnwell).not_covering(comp)

# PWELL
pwell_res = lvpwell.and(res_mk).and(dnwell).not_covering(comp)

# ==============
# ---- POLY ----
# ==============

# NPOLYF_U
npolyf_u_layer                = nplus.and(poly2).and(sab).and(res_mk).not(dnwell)

# NPOLYF_U_DW
npolyf_u_dw_layer             = nplus.and(poly2).and(sab).and(res_mk).and(dnwell)

# PPOLYF_U
ppolyf_u_layer                = pplus.and(poly2).and(sab).and(res_mk).not_interacting(resistor).not(dnwell)

# PPOLYF_U_DW
ppolyf_u_dw_layer             = pplus.and(poly2).and(sab).and(res_mk).not_interacting(resistor).and(dnwell)

# NPOLYF_S
npolyf_s_layer                = nplus.and(poly2).and(res_mk).not(dnwell).not_interacting(sab)

# NPOLYF_S_DW
npolyf_s_dw_layer             = nplus.and(poly2).and(res_mk).and(dnwell).not_interacting(sab)

# PPOLYF_S
ppolyf_s_layer                = pplus.and(poly2).and(res_mk).not(dnwell).not_interacting(sab)

# PPOLYF_S_DW
ppolyf_s_dw_layer             = pplus.and(poly2).and(res_mk).and(dnwell).not_interacting(sab)

# ==============
# --H-POLY RES--
# ==============

if POLY_RES == "1k"

  # PPOLYF_U_1K
  ppolyf_u_1k_layer             = poly2.and(sab).and(res_mk).and(resistor).not(dnwell).not(v5_xtor).not(dualgate)

  # PPOLYF_U_DW_1K
  ppolyf_u_1k_dw_layer          = poly2.and(res_mk).and(dnwell).and(resistor).not(v5_xtor).not(dualgate)

  # PPOLYF_U_1K_6p0
  ppolyf_u_1k_6p0_layer         = poly2.and(sab).and(res_mk).and(resistor).not(dnwell).not(v5_xtor).and(dualgate)

  # PPOLYF_U_DW_1K_6p0
  ppolyf_u_1k_6p0_dw_layer      = poly2.and(res_mk).and(dnwell).and(resistor).not(v5_xtor).and(dualgate)

elsif POLY_RES == "2k"

  # PPOLYF_U_2K
  ppolyf_u_2k_layer             = poly2.and(sab).and(res_mk).and(resistor).not(dnwell).not(v5_xtor).not(dualgate)

  # PPOLYF_U_DW_2K
  ppolyf_u_2k_dw_layer          = poly2.and(res_mk).and(dnwell).and(resistor).not(v5_xtor).not(dualgate)

  # PPOLYF_U_2K_6p0
  ppolyf_u_2k_6p0_layer         = poly2.and(sab).and(res_mk).and(resistor).not(dnwell).not(v5_xtor).and(dualgate)

  # PPOLYF_U_DW_2K_6p0
  ppolyf_u_2k_6p0_dw_layer      = poly2.and(res_mk).and(dnwell).and(resistor).not(v5_xtor).and(dualgate)

elsif POLY_RES == "3k"

  # PPOLYF_U_3K
  ppolyf_u_3k_layer             = poly2.and(sab).and(res_mk).and(resistor).not(dnwell).not(v5_xtor).not(dualgate)

  # PPOLYF_U_DW_3K
  ppolyf_u_3k_dw_layer          = poly2.and(res_mk).and(dnwell).and(resistor).not(v5_xtor).not(dualgate)

  # PPOLYF_U_3K_6p0
  ppolyf_u_3k_6p0_layer         = poly2.and(sab).and(res_mk).and(resistor).not(dnwell).not(v5_xtor).and(dualgate)

  # PPOLYF_U_DW_3K_6p0
  ppolyf_u_3k_6p0_dw_layer      = poly2.and(res_mk).and(dnwell).and(resistor).not(v5_xtor).and(dualgate)

end


# ===============
# ---- METAL ----
# ===============

# Metal1 resistor
rm1_res = metal1.and(metal1_res)

# Metal2 resistor
rm2_res = metal2.and(metal2_res)

# Metal3 resistor
rm3_res = metal3.and(metal3_res)

# Metaltop resistor
tm_res = metaltop.and(metal6_res)

#==================================
# ------ MIMCAP DERIVATIONS -------
#==================================
logger.info("Starting MIMCAP DERIVATIONS")

# mim option A
mim_virtual = fusetop.sized(1.06.um).and(metal2.interacting(fusetop))
metal2_ncap = metal2_con.not(mim_virtual)
fuse_cap    = fusetop.interacting(cap_mk).interacting(mim_l_mk)

# mim_option B
mimtm_virtual   = fusetop.sized(1.06.um).and(topmin1_metal.interacting(fusetop))
metal3_ncap     = metal3_con.not(mimtm_virtual)
metal4_ncap     = metal4.not(mimtm_virtual)
metal5_ncap     = metal5.not(mimtm_virtual)


#==================================
# ------ MOSCAP DERIVATIONS -------
#==================================
logger.info("Starting MOSCAP DERIVATIONS")

# nmoscap_3p3 capacitor
nmos_gate_3p3 = ngate.not(v5_xtor).not(dualgate).outside(dnwell).interacting(mos_cap_mk)

# nmoscap_3p3_dw capacitor
nmos_gate_3p3_dw = ngate.not(v5_xtor).not(dualgate).inside(dnwell).interacting(mos_cap_mk)

# pmoscap_3p3 capacitor
pmos_gate_3p3 = pgate.not(v5_xtor).not(dualgate).outside(dnwell).interacting(mos_cap_mk)

# pmoscap_3p3_dw capacitor
pmos_gate_3p3_dw = pgate.not(v5_xtor).not(dualgate).inside(dnwell).interacting(mos_cap_mk)

# nmoscap_6p0 capacitor
nmos_gate_6p0 = ngate.and(dualgate).outside(dnwell).interacting(mos_cap_mk)

# nmoscap_6p0_dw capacitor
nmos_gate_6p0_dw = ngate.and(dualgate).inside(dnwell).interacting(mos_cap_mk)

# pmoscap_6p0 capacitor
pmos_gate_6p0 = pgate.and(dualgate).outside(dnwell).interacting(mos_cap_mk)

# pmoscap_6p0_dw capacitor
pmos_gate_6p0_dw = pgate.and(dualgate).inside(dnwell).interacting(mos_cap_mk)

# nmoscap_3p3_b capacitor
nmoscap_3p3_b = ngate.not(v5_xtor).not(dualgate).inside(nwell).interacting(mos_cap_mk)

# pmoscap_3p3_b capacitor
pmoscap_3p3_b = pgate.not(v5_xtor).not(dualgate).inside(ptap).interacting(mos_cap_mk)

# nmoscap_6p0_b capacitor
nmoscap_6p0_b = ngate.and(dualgate).inside(nwell).interacting(mos_cap_mk)

# pmoscap_6p0_b capacitor
pmoscap_6p0_b = pgate.and(dualgate).inside(ptap).interacting(mos_cap_mk)

#================================
# ------ ESD DERIVATIONS --------
#================================
logger.info("Starting MOS SAB DERIVATIONS")

# ==============
# ---- PMOS ----
# ==============
logger.info("Starting PMOS SAB DERIVATIONS")

# 3.3V ESD PMOS transistor outside DNWELL
pgate_sab_3p3v = pgate.not(v5_xtor).not(dualgate).not(dnwell).and(esd_mk).interacting(sab)

# 5V ESD PMOS transistor outside DNWELL
pgate_sab_5v = pgate.and(v5_xtor).and(dualgate).not(dnwell).and(esd_mk).interacting(sab)

# 6V ESD PMOS transistor outside DNWELL
pgate_sab_6v = pgate.not(v5_xtor).and(dualgate).not(dnwell).and(esd_mk).interacting(sab)

# 3.3V ESD PMOS transistor inside DNWELL
pgate_dw_sab_3p3v = pgate_dw.not(v5_xtor).not(dualgate).and(esd_mk).interacting(sab)

# 5V ESD PMOS transistor inside DNWELL
pgate_dw_sab_5v = pgate_dw.and(v5_xtor).and(dualgate).and(esd_mk).interacting(sab)

# 6V ESD PMOS transistor inside DNWELL
pgate_dw_sab_6v = pgate_dw.not(v5_xtor).and(dualgate).and(esd_mk).interacting(sab)

# ==============
# ---- NMOS ----
# ==============
logger.info("Starting NMOS SAB DERIVATIONS")

# 3.3V ESD NMOS transistor outside DNWELL
ngate_sab_3p3v = ngate.not(v5_xtor).not(dualgate).not(dnwell).and(esd_mk).interacting(sab)

# 5V ESD NMOS transistor outside DNWELL
ngate_sab_5v = ngate.and(v5_xtor).and(dualgate).not(dnwell).and(esd_mk).interacting(sab)

# 6V ESD NMOS transistor outside DNWELL
ngate_sab_6v = ngate.not(v5_xtor).and(dualgate).not(dnwell).and(esd_mk).interacting(sab)

# 3.3V ESD NMOS transistor inside DNWELL
ngate_dw_sab_3p3v = ngate_dw.not(v5_xtor).not(dualgate).and(esd_mk).interacting(sab)

# 5V ESD NMOS transistor inside DNWELL
ngate_dw_sab_5v = ngate_dw.and(v5_xtor).and(dualgate).and(esd_mk).interacting(sab)

# 6V ESD NMOS transistor inside DNWELL
ngate_dw_sab_6v = ngate_dw.not(v5_xtor).and(dualgate).and(esd_mk).interacting(sab)

#================================
# ------ EFUSE DERIVATIONS ------
#================================
logger.info("Starting NMOS EFUSE DERIVATIONS")

cathode         = poly2.inside(efuse_mk).not(lvs_source.or(plfuse))
anode           = poly2.and(lvs_source).inside(efuse_mk)
efuse_link      = (poly2).and(plfuse).inside(efuse_mk)
efuse_con_layer = cathode | anode


#================================================
#------------ DEVICES CONNECTIVITY --------------
#================================================

logger.info("Starting GF180 LVS connectivity setup")

#================================
# ----- GENERAL CONNECTIONS -----
#================================
logger.info("Starting GF180 LVS connectivity setup (Inter-layer)")

# Inter-layer
connect(sub         ,          ptap)
connect(lvpwell_con ,          ptap)
connect(lvpwell_con ,       ptap_dw)
connect(dnwell      ,       ntap_dw)
connect(nwell_con   ,          ntap)
connect(ptap        ,       contact)
connect(ptap_dw     ,       contact)
connect(ntap        ,       contact)
connect(ntap_dw     ,       contact)
connect(psd         ,       contact)
connect(psd_dw      ,       contact)
connect(nsd         ,       contact)
connect(poly2_con   ,       contact)
connect(contact     ,    metal1_con)
connect(metal1_con  ,          via1)
connect(via1        ,   metal2_ncap)
connect(metal2_ncap ,          via2)
connect(via2        ,   metal3_ncap)
connect(metal3_ncap ,          via3)
connect(via3        ,   metal4_ncap)
connect(metal4_ncap ,          via4)
connect(via4        ,   metal5_ncap)
connect(metal5_ncap ,          via5)
connect(via5        ,  metaltop_con)

logger.info("Starting GF180 LVS connectivity setup (Attaching labels)")

# Attaching labels
connect(comp        ,     comp_label)
connect(poly2_con   ,    poly2_label)
connect(metal1_con  ,   metal1_label)
connect(metal2_ncap ,   metal2_label)
connect(metal3_ncap ,   metal3_label)
connect(metal4_ncap ,   metal4_label)
connect(metal5_ncap ,   metal5_label)
connect(metaltop_con, metaltop_label)

logger.info("Starting GF180 LVS connectivity setup (Global)")

# Global
connect_global(sub  ,         substrate_name)

logger.info("Starting GF180 LVS connectivity setup (Multifinger Devices)")

# Multifinger Devices
connect_implicit("*")

#================================
# ----- MOSFET CONNECTIONS ------
#================================
logger.info("Starting LVS MOSFET CONNECTIONS")

connect(psd_dw,  contact)

connect(nd_ldmos, contact)
connect(ns_ldmos, contact)

connect(pd_ldmos, contact)
connect(ps_ldmos, contact)


#================================
# ------ BJT CONNECTIONS --------
#================================
logger.info("Starting LVS BJT CONNECTIONS")

# ==============
# ---- vnpn ----
# ==============

# vnpn_10x10 nodes connections
connect(vnpn_10x10_e,contact)
connect(vnpn_10x10_b,contact)
connect(vnpn_10x10_c,contact)

# vnpn_5x5 nodes connections
connect(vnpn_5x5_e,contact)
connect(vnpn_5x5_b,contact)
connect(vnpn_5x5_c,contact)

# vnpn_0p54x16 nodes connections
connect(vnpn_0p54x16_e,contact)
connect(vnpn_0p54x16_b,contact)
connect(vnpn_0p54x16_c,contact)

# vnpn_0p54x8 nodes connections
connect(vnpn_0p54x8_e,contact)
connect(vnpn_0p54x8_b,contact)
connect(vnpn_0p54x8_c,contact)

# vnpn_0p54x4 nodes connections
connect(vnpn_0p54x4_e,contact)
connect(vnpn_0p54x4_b,contact)
connect(vnpn_0p54x4_c,contact)

# vnpn_0p54x2 nodes connections
connect(vnpn_0p54x2_e,contact)
connect(vnpn_0p54x2_b,contact)
connect(vnpn_0p54x2_c,contact)

# ==============
# ---- vpnp ----
# ==============

# vpnp_10x10 nodes connections
connect(vpnp_10x10_e,contact)
connect(vpnp_10x10_b,contact)
connect(vpnp_10x10_c,contact)

# vpnp_5x5 nodes connections
connect(vpnp_5x5_e,contact)
connect(vpnp_5x5_b,contact)
connect(vpnp_5x5_c,contact)

# vpnp_0p42x10 nodes connections
connect(vpnp_0p42x10_e,contact)
connect(vpnp_0p42x10_b,contact)
connect(vpnp_0p42x10_c,contact)

# vpnp_0p42x5 nodes connections
connect(vpnp_0p42x5_e,contact)
connect(vpnp_0p42x5_b,contact)
connect(vpnp_0p42x5_c,contact)


#================================
# ----- DIODE CONNECTIONS -------
#================================

logger.info("Starting LVS DIODE CONNECTIONS")

# np_3p3 diode
connect(np_3p3_terminal_n,contact)

# np_3p3_dw diode
connect(np_3p3_dw_terminal_n,contact)

# np_6p0 diode
connect(np_6p0_terminal_n,contact)

# np_6p0_dw diode
connect(np_6p0_dw_terminal_n,contact)

# pn_3p3 diode
connect(pn_3p3_terminal_p,contact)

# pn_3p3_dw diode
connect(pn_3p3_dw_terminal_p,contact)

# pn_6p0 diode
connect(pn_6p0_terminal_p,contact)

# pn_6p0_dw diode
connect(pn_6p0_dw_terminal_p,contact)

# nwp_3p3 diode
connect(nwp_3p3_terminal_p,contact)
connect(nwp_3p3_terminal_n,nwell)

# nwp_6p0 diode
connect(nwp_6p0_terminal_p,contact)
connect(nwp_6p0_terminal_n,nwell)

# dnwpw_3p3 diode
connect(dnwpw_3p3_terminal_p,contact)

# dnwpw_6p0 diode
connect(dnwpw_6p0_terminal_p,contact)

# dnwps_3p3 diode
connect(dnwps_3p3_terminal_p,ptap)

# dnwps_6p0 diode
connect(dnwps_6p0_terminal_p,ptap)

# sc_diode diode
connect(sc_diode_terminal_n,contact)
connect(sc_diode_terminal_p,schottky_diode)

#================================
# ---- RESISTOR DERIVATIONS -----
#================================

logger.info("Starting LVS RESISTOR CONNECTIONS")

connect(nplus_cont   , contact)
connect(pplus_cont   , contact)
connect(pplus_dw_cont, contact)

#==================================
# ------ MIMCAP CONNECTIONS -------
#==================================

logger.info("Starting LVS MIMCAP CONNECTIONS")

if MIM_OPTION == "A"

  # mim option A
  connect(metal2,mim_virtual)
  connect(fuse_cap,via2)

elsif MIM_OPTION == "B"

  # mim_option B
  connect(topmin1_metal,mimtm_virtual)
  connect(fuse_cap,top_via)

end

#================================
# ------ EFUSE CONNECTIONS ------
#================================

logger.info("Starting LVS EFUSE CONNECTIONS")

connect(cathode,  contact)
connect(anode,  contact)


#================================================
#------------- DEVICES EXTRACTION ---------------
#================================================

logger.info("Starting GF180 LVS DEVICES EXTRACTION")

#================================
# ----- MOSFET EXTRACTION -------
#================================
logger.info("Starting MOSFET EXTRACTION")

# ==============
# ---- PMOS ----
# ==============
logger.info("Starting PMOS EXTRACTION")

# 3.3V PMOS transistor outside DNWELL
logger.info("Extracting 3.3V PMOS transistor outside DNWEL")
extract_devices(mos4("pmos_3p3"), { "SD" => psd, "G" => pgate_3p3v, "tS" => psd, "tD" => psd, "tG" => poly2_con, "W" => nwell_con })

# 5V PMOS transistor outside DNWELL
logger.info("Extracting 5V PMOS transistor outside DNWELL")
extract_devices(mos4("pmos_5p0"), { "SD" => psd, "G" => pgate_5v,   "tS" => psd, "tD" => psd, "tG" => poly2_con, "W" => nwell_con })

# 6V PMOS transistor outside DNWELL
logger.info("Extracting 6V PMOS transistor outside DNWELL")
extract_devices(mos4("pmos_6p0"), { "SD" => psd, "G" => pgate_6v,   "tS" => psd, "tD" => psd, "tG" => poly2_con, "W" => nwell_con })

# 3.3V PMOS transistor inside DNWELL
logger.info("Extracting 3.3V PMOS transistor inside DNWELL")
extract_devices(mos4("pmos_3p3_dw"), { "SD" => psd_dw, "G" => pgate_3p3v_dw,   "tS" => psd_dw, "tD" => psd_dw, "tG" => poly2_con, "W" => dnwell })

# 5V PMOS transistor inside DNWELL
logger.info("Extracting 5V PMOS transistor inside DNWELL")
extract_devices(mos4("pmos_5p0_dw"), { "SD" => psd_dw, "G" => pgate_5v_dw,   "tS" => psd_dw, "tD" => psd_dw, "tG" => poly2_con, "W" => dnwell })

# 6V PMOS transistor inside DNWELL
logger.info("Extracting 6V PMOS transistor inside DNWELL")
extract_devices(mos4("pmos_6p0_dw"), { "SD" => psd_dw, "G" => pgate_6v_dw,   "tS" => psd_dw, "tD" => psd_dw, "tG" => poly2_con, "W" => dnwell })

# LDPMOS transistor
logger.info("Extracting LDPMOS transistor")
extract_devices(mos4("pmos_10p0_asym"), { "SD" => psd_ldmos, "G" => pgate_ldmos, "tS" => ps_ldmos, "tD" => pd_ldmos, "tG" => poly2_con, "W" => dnwell })

# ==============
# ---- NMOS ----
# ==============

logger.info("Starting NMOS EXTRACTION")

# 3.3V NMOS transistor outside DNWELL
logger.info("3.3V NMOS transistor outside DNWELL")
extract_devices(mos4("nmos_3p3"), { "SD" => nsd, "G" => ngate_3p3v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => sub })

# 5V NMOS transistor outside DNWELL
logger.info("5V NMOS transistor outside DNWELL")
extract_devices(mos4("nmos_5p0"), { "SD" => nsd, "G" => ngate_5v,   "tS" => nsd, "tD" => nsd, "tG" => poly2_con,   "W" => sub })

# 6V NMOS transistor outside DNWELL
logger.info("6V NMOS transistor outside DNWELL")
extract_devices(mos4("nmos_6p0"), { "SD" => nsd, "G" => ngate_6v,   "tS" => nsd, "tD" => nsd, "tG" => poly2_con,   "W" => sub })

# 3.3V NMOS transistor inside DNWELL
logger.info("3.3V NMOS transistor inside DNWELL")
extract_devices(mos4("nmos_3p3_dw"), { "SD" => nsd, "G" => ngate_3p3v_dw, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => lvpwell_con })

# 5V NMOS transistor inside DNWELL
logger.info("5V NMOS transistor inside DNWELL")
extract_devices(mos4("nmos_5p0_dw"), { "SD" => nsd, "G" => ngate_5v_dw,   "tS" => nsd, "tD" => nsd, "tG" => poly2_con,   "W" => lvpwell_con })

# 6V NMOS transistor inside DNWELL
logger.info("6V NMOS transistor inside DNWELL")
extract_devices(mos4("nmos_6p0_dw"), { "SD" => nsd, "G" => ngate_6v_dw,   "tS" => nsd, "tD" => nsd, "tG" => poly2_con,   "W" => lvpwell_con })

# Native Vt NMOS transistor
logger.info("Native Vt NMOS transistor")
extract_devices(mos4("nmos_6p0_nat"), { "SD" => nsd, "G" => ngate_nat, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => sub })

# LDNMOS transistor
logger.info("Extracting LDNMOS transistor")
extract_devices(mos4("nmos_10p0_asym"), { "SD" => nsd_ldmos, "G" => ngate_ldmos, "tS" => ns_ldmos, "tD" => nd_ldmos, "tG" => poly2_con, "W" => sub })


#================================
# ------- BJT EXTRACTION --------
#================================
logger.info("Starting BJT EXTRACTION")

# ====================
# ------ vnpn --------
# ====================
logger.info("Starting vnpn BJT EXTRACTION")

# vnpn_10x10 BJT
ignore_parameter("vnpn_10x10","AE")
logger.info("Extracting vnpn_10x10 BJT")
extract_devices(bjt4("vnpn_10x10"), { "C" => vnpn_10x10_c.extents , "B" => vnpn_10x10_b.extents , "E" => vnpn_10x10_e,"S" => sub.extents,
                                  "tC" => vnpn_10x10_c , "tB" => vnpn_10x10_b, "tE" => vnpn_10x10_e, "tS" => sub })

# vnpn_5x5 BJT
ignore_parameter("vnpn_5x5","AE")
logger.info("Extracting vnpn_5x5 BJT")
extract_devices(bjt4("vnpn_5x5"), { "C" => vnpn_5x5_c.extents , "B" => vnpn_5x5_b.extents , "E" => vnpn_5x5_e,"S" => sub.extents,
                                "tC" => vnpn_5x5_c , "tB" => vnpn_5x5_b, "tE" => vnpn_5x5_e, "tS" => sub })

# vnpn_0p54x16 BJT
ignore_parameter("vnpn_0p54x16","AE")
logger.info("Extracting vnpn_0p54x16 BJT")
extract_devices(bjt4("vnpn_0p54x16"), { "C" => vnpn_0p54x16_c.extents , "B" => vnpn_0p54x16_b.extents , "E" => vnpn_0p54x16_e,"S" => sub.extents,
                                    "tC" => vnpn_0p54x16_c , "tB" => vnpn_0p54x16_b, "tE" => vnpn_0p54x16_e, "tS" => sub })

# vnpn_0p54x8 BJT
ignore_parameter("vnpn_0p54x8","AE")
logger.info("Extracting vnpn_0p54x8 BJT")
extract_devices(bjt4("vnpn_0p54x8"), { "C" => vnpn_0p54x8_c.extents , "B" => vnpn_0p54x8_b.extents , "E" => vnpn_0p54x8_e,"S" => sub.extents,
                                   "tC" => vnpn_0p54x8_c , "tB" => vnpn_0p54x8_b, "tE" => vnpn_0p54x8_e, "tS" => sub })

# vnpn_0p54x4 BJT
ignore_parameter("vnpn_0p54x4","AE")
logger.info("Extracting vnpn_0p54x4 BJT")
extract_devices(bjt4("vnpn_0p54x4"), { "C" => vnpn_0p54x4_c.extents , "B" => vnpn_0p54x4_b.extents , "E" => vnpn_0p54x4_e,"S" => sub.extents,
                                   "tC" => vnpn_0p54x4_c , "tB" => vnpn_0p54x4_b, "tE" => vnpn_0p54x4_e, "tS" => sub })

# vnpn_0p54x2 BJT
ignore_parameter("vnpn_0p54x2","AE")
logger.info("Extracting vnpn_0p54x2 BJT")
extract_devices(bjt4("vnpn_0p54x2"), { "C" => vnpn_0p54x2_c.extents , "B" => vnpn_0p54x2_b.extents , "E" => vnpn_0p54x2_e,"S" => sub.extents,
                                   "tC" => vnpn_0p54x2_c , "tB" => vnpn_0p54x2_b, "tE" => vnpn_0p54x2_e, "tS" => sub })

# ====================
# ------- vpnp--------
# ====================
logger.info("Starting vpnp BJT EXTRACTION")

# vpnp_10x10 BJT
ignore_parameter("vpnp_10x10","AE")
logger.info("Extracting vpnp_10x10 BJT")
extract_devices(bjt3("vpnp_10x10"), { "C" => vpnp_10x10_c.extents , "B" => vpnp_10x10_b.extents , "E" => vpnp_10x10_e,
                                  "tC" => vpnp_10x10_c , "tB" => vpnp_10x10_b, "tE" => vpnp_10x10_e })

# vpnp_5x5 BJT
ignore_parameter("vpnp_5x5","AE")
logger.info("Extracting vpnp_5x5 BJT")
extract_devices(bjt3("vpnp_5x5"), { "C" => vpnp_5x5_c.extents , "B" => vpnp_5x5_b.extents , "E" => vpnp_5x5_e,
                                "tC" => vpnp_5x5_c , "tB" => vpnp_5x5_b, "tE" => vpnp_5x5_e })

# vpnp_0p42x10 BJT
ignore_parameter("vpnp_0p42x10","AE")
logger.info("Extracting vpnp_0p42x10 BJT")
extract_devices(bjt3("vpnp_0p42x10"), { "C" => vpnp_0p42x10_c.extents , "B" => vpnp_0p42x10_b.extents , "E" => vpnp_0p42x10_e,
                                    "tC" => vpnp_0p42x10_c , "tB" => vpnp_0p42x10_b, "tE" => vpnp_0p42x10_e })

# vpnp_0p42x5 BJT
ignore_parameter("vpnp_0p42x5","AE")
logger.info("Extracting vpnp_0p42x5 BJT")
extract_devices(bjt3("vpnp_0p42x5"), { "C" => vpnp_0p42x5_c.extents , "B" => vpnp_0p42x5_b.extents , "E" => vpnp_0p42x5_e,
                                   "tC" => vpnp_0p42x5_c , "tB" => vpnp_0p42x5_b, "tE" => vpnp_0p42x5_e })


#================================
# ------ DIODE EXTRACTION -------
#================================
logger.info("Starting DIODE EXTRACTION")

# np_3p3 diode
logger.info("Extracting np_3p3 diode")
extract_devices(diode("np_3p3"), { "N" => np_3p3_terminal_n , "P" => lvpwell_con})

# np_3p3_dw diode
logger.info("Extracting np_3p3_dw diode")
extract_devices(diode("np_3p3_dw"), { "N" => np_3p3_dw_terminal_n , "P" => lvpwell_con})

# np_6p0 diode
logger.info("Extracting np_6p0 diode")
extract_devices(diode("np_6p0"), { "N" => np_6p0_terminal_n , "P" => lvpwell_con})

# np_6p0_dw diode
logger.info("Extracting np_6p0_dw diode")
extract_devices(diode("np_6p0_dw"), { "N" => np_6p0_dw_terminal_n , "P" => lvpwell_con})

# pn_3p3 diode
logger.info("Extracting pn_3p3 diode")
extract_devices(diode("pn_3p3"), { "N" => nwell_con , "P" => pn_3p3_terminal_p})

# pn_3p3_dw diode
logger.info("Extractingpn_3p3_dw diode")
extract_devices(diode("pn_3p3_dw"), { "N" => nwell_con , "P" => pn_3p3_dw_terminal_p})

# pn_6p0 diode
logger.info("Extracting pn_6p0 diode")
extract_devices(diode("pn_6p0"), { "N" => nwell_con , "P" => pn_6p0_terminal_p})

# pn_6p0_dw diode
logger.info("Extracting pn_6p0_dw diode")
extract_devices(diode("pn_6p0_dw"), { "N" => nwell_con , "P" => pn_6p0_dw_terminal_p})

# nwp_3p3 diode
logger.info("Extracting nwp_3p3 diode")
extract_devices(diode("nwp_3p3"), { "N" => nwp_3p3_terminal_n , "P" => nwp_3p3_terminal_p})

# nwp_6p0 diode
logger.info("Extracting nwp_6p0 diode")
extract_devices(diode("nwp_6p0"), { "N" => nwp_6p0_terminal_n , "P" => nwp_6p0_terminal_p})

# dnwpw_3p3 diode
logger.info("Extracting dnwpw_3p3 diode")
extract_devices(diode("dnwpw_3p3"), { "N" => dnwell , "P" => dnwpw_3p3_terminal_p})

# dnwpw_6p0 diode
logger.info("Extracting dnwpw_6p0 diode")
extract_devices(diode("dnwpw_6p0"), { "N" => dnwell , "P" => dnwpw_6p0_terminal_p})

# dnwps_3p3 diode
logger.info("Extracting dnwps_3p3 diode")
extract_devices(diode("dnwps_3p3"), { "N" => dnwell , "P" => dnwps_3p3_terminal_p})

# dnwps_6p0 diode
logger.info("Extracting dnwps_6p0 diode")
extract_devices(diode("dnwps_6p0"), { "N" => dnwell , "P" => dnwps_6p0_terminal_p})

# sc_diode diode
logger.info("Extracting sc_diode diode")
extract_devices(diode("sc_diode"), { "N" => sc_diode_terminal_n , "P" => schottky_diode})


#================================
# ---- RESISTOR EXTRACTIONS -----
#================================
logger.info("Starting RESISTOR EXTRACTION")

# ===============
# --DIFF & WELL--
# ===============

# NPLUS_U
logger.info("Extracting NPLUS_U device")
extract_devices(resistor_with_bulk("nplus_u", 60, BResistor), { "R" => nplus_u_layer, "C" => nplus_cont, "W" => sub})

# NPLUS_U_DW
logger.info("Extracting NPLUS_U_DW device")
extract_devices(resistor_with_bulk("nplus_u_dw", 60, BResistor), { "R" => nplus_u_dw_layer, "C" => nplus_cont, "W" => lvpwell_con })

# PPLUS_U
logger.info("Extracting PPLUS_U device")
extract_devices(resistor_with_bulk("pplus_u", 185, BResistor), { "R" => pplus_u_layer, "C" => pplus_cont, "W" => nwell_con})

# PPLUS_U_DW
logger.info("Extracting PPLUS_U_DW device")
extract_devices(resistor_with_bulk("pplus_u_dw", 185, BResistor), { "R" => pplus_u_dw_layer, "C" => pplus_dw_cont, "W" => dnwell })

# NPLUS_S
logger.info("Extracting NPLUS_S device")
extract_devices(resistor_with_bulk("nplus_s", 6.3, BResistor), { "R" => nplus_s_layer, "C" => nplus_cont, "W" => sub})

# NPLUS_S_DW
logger.info("Extracting NPLUS_S_DW device")
extract_devices(resistor_with_bulk("nplus_s_dw", 6.3, BResistor), { "R" => nplus_s_dw_layer, "C" => nplus_cont, "W" => lvpwell_con })

# PPLUS_S
logger.info("Extracting PPLUS_S device")
extract_devices(resistor_with_bulk("pplus_s", 7, BResistor), { "R" => pplus_s_layer, "C" => pplus_cont, "W" => nwell_con})

# PPLUS_S_DW
logger.info("Extracting PPLUS_S_DW device")
extract_devices(resistor_with_bulk("pplus_s_dw", 7, BResistor), { "R" => pplus_s_dw_layer, "C" => pplus_dw_cont, "W" => dnwell })

# NWELL
logger.info("Extracting NWELL device")
extract_devices(resistor_with_bulk("nwell", 1000, BResistor), { "R" => nwell_res, "C" => nwell_con, "W" => sub})

# PWELL
logger.info("Extracting PWELL device")
extract_devices(resistor_with_bulk("pwell", 1000, BResistor), { "R" => pwell_res, "C" => lvpwell_con, "W" => dnwell})

# ==============
# ---- POLY ----
# ==============

# NPOLYF_U
extract_devices(resistor_with_bulk("npolyf_u", 310, BResistor), { "R" => npolyf_u_layer, "C" => poly2_con, "W" => sub})

# NPOLYF_U_DW
extract_devices(resistor_with_bulk("npolyf_u_dw", 310, BResistor), { "R" => npolyf_u_dw_layer, "C" => poly2_con, "W" => dnwell })

# PPOLYF_U
extract_devices(resistor_with_bulk("ppolyf_u", 350, BResistor), { "R" => ppolyf_u_layer, "C" => poly2_con, "W" => sub})

# PPOLYF_U_DW
extract_devices(resistor_with_bulk("ppolyf_u_dw", 350, BResistor), { "R" => ppolyf_u_dw_layer, "C" => poly2_con, "W" => dnwell })

# NPOLYF_S
extract_devices(resistor_with_bulk("npolyf_s", 6.8, BResistor), { "R" => npolyf_s_layer, "C" => poly2_con, "W" => sub})

# NPOLYF_S_DW
extract_devices(resistor_with_bulk("npolyf_s_dw", 6.8, BResistor), { "R" => npolyf_s_dw_layer, "C" => poly2_con, "W" => dnwell })

# PPOLYF_S
extract_devices(resistor_with_bulk("ppolyf_s", 7.3, BResistor), { "R" => ppolyf_s_layer, "C" => poly2_con, "W" => sub})

# PPOLYF_S_DW
extract_devices(resistor_with_bulk("ppolyf_s_dw", 7.3, BResistor), { "R" => ppolyf_s_dw_layer, "C" => poly2_con, "W" => dnwell })

# ==============
# --H-POLY RES--
# ==============

if POLY_RES == "1k"

  # PPOLYF_U_1K
  extract_devices(resistor_with_bulk("ppolyf_u_1k", 1000, BResistor), { "R" => ppolyf_u_1k_layer, "C" => poly2_con, "W" => sub})

  # PPOLYF_U_DW_1K
  extract_devices(resistor_with_bulk("ppolyf_u_1k_dw", 1000, BResistor), { "R" => ppolyf_u_1k_dw_layer, "C" => poly2_con, "W" => dnwell })

  # PPOLYF_U_1K_6p0
  extract_devices(resistor_with_bulk("ppolyf_u_1k_6p0", 1000, BResistor), { "R" => ppolyf_u_1k_6p0_layer, "C" => poly2_con, "W" => sub})

  # PPOLYF_U_DW_1K_6p0
  extract_devices(resistor_with_bulk("ppolyf_u_1k_6p0_dw", 1000, BResistor), { "R" => ppolyf_u_1k_6p0_dw_layer, "C" => poly2_con, "W" => dnwell })

elsif POLY_RES == "2k"

  # PPOLYF_U_2K
  extract_devices(resistor_with_bulk("ppolyf_u_2k", 2000, BResistor), { "R" => ppolyf_u_2k_layer, "C" => poly2_con, "W" => sub})

  # PPOLYF_U_DW_2K
  extract_devices(resistor_with_bulk("ppolyf_u_2k_dw", 2000, BResistor), { "R" => ppolyf_u_2k_dw_layer, "C" => poly2_con, "W" => dnwell })

  # PPOLYF_U_2K_6p0
  extract_devices(resistor_with_bulk("ppolyf_u_2k_6p0", 2000, BResistor), { "R" => ppolyf_u_2k_6p0_layer, "C" => poly2_con, "W" => sub})

  # PPOLYF_U_DW_2K_6p0
  extract_devices(resistor_with_bulk("ppolyf_u_2k_6p0_dw", 2000, BResistor), { "R" => ppolyf_u_2k_6p0_dw_layer, "C" => poly2_con, "W" => dnwell })

elsif POLY_RES == "3k"

  # PPOLYF_U_3K
  extract_devices(resistor_with_bulk("ppolyf_u_3k", 3000, BResistor), { "R" => ppolyf_u_3k_layer, "C" => poly2_con, "W" => sub})

  # PPOLYF_U_DW_3K
  extract_devices(resistor_with_bulk("ppolyf_u_3k_dw", 3000, BResistor), { "R" => ppolyf_u_3k_dw_layer, "C" => poly2_con, "W" => dnwell })

  # PPOLYF_U_3K_6p0
  extract_devices(resistor_with_bulk("ppolyf_u_3k_6p0", 3000, BResistor), { "R" => ppolyf_u_3k_6p0_layer, "C" => poly2_con, "W" => sub})

  # PPOLYF_U_DW_3K_6p0
  extract_devices(resistor_with_bulk("ppolyf_u_3k_6p0_dw", 3000, BResistor), { "R" => ppolyf_u_3k_6p0_dw_layer, "C" => poly2_con, "W" => dnwell })

end


# ===============
# ---- METAL ----
# ===============

# RM1
logger.info("Extracting RM1 device")
extract_devices(resistor("rm1", 0.09, NResistor), { "R" => rm1_res, "C" => metal1_con })

# RM2
logger.info("Extracting RM2 device")
extract_devices(resistor("rm2", 0.09, NResistor), { "R" => rm2_res, "C" => metal2_ncap })

# RM3
logger.info("Extracting RM3 device")
extract_devices(resistor("rm3", 0.09, NResistor), { "R" => rm3_res, "C" => metal3_ncap })

if METAL_TOP == "6K"

  # TM6K
  logger.info("Extracting TM6K device")
  extract_devices(resistor("tm6k", 0.06, NResistor), { "R" => tm_res, "C" => metaltop_con })

elsif METAL_TOP == "9K"

  # TM9K
  logger.info("Extracting TM9K device")
  extract_devices(resistor("tm9k", 0.04, NResistor), { "R" => tm_res, "C" => metaltop_con })

elsif METAL_TOP == "11K"

  # TM11K
  logger.info("Extracting TM11K device")
  extract_devices(resistor("tm11k", 0.04, NResistor), { "R" => tm_res, "C" => metaltop_con })

elsif METAL_TOP == "30K"

  # TM30K
  logger.info("Extracting TM30K device")
  extract_devices(resistor("tm30k", 0.0095, NResistor), { "R" => tm_res, "C" => metaltop_con })

end


#==================================
# ------- MIMCAP EXTRACTION -------
#==================================
logger.info("Starting MIMCAP EXTRACTION")

if MIM_OPTION == "A"

  if MIM_CAP == "1"

    # mim_1p0fF capacitor
    logger.info("Extracting mim_1p0fF device")
    extract_devices(capacitor("mim_1p0fF", 1.0e-15, MIMCap), { "P1" => mim_virtual, "P2" => fuse_cap })
    tolerance("mim_1p0fF", "C", :relative => 0.25)

  elsif MIM_CAP == "1.5"

    # mim_1p5fF capacitor
    logger.info("Extracting mim_1p5fF device")
    extract_devices(capacitor("mim_1p5fF", 1.5e-15, MIMCap), { "P1" => mim_virtual, "P2" => fuse_cap })
    tolerance("mim_1p5fF", "C", :relative => 0.25)

  elsif MIM_CAP == "2"

    # mim_single_2p0fF capacitor
    logger.info("Extracting mim_single_2p0fF device")
    extract_devices(capacitor("mim_single_2p0fF", 2.0e-15, MIMCap), { "P1" => mim_virtual, "P2" => fuse_cap })
    tolerance("mim_single_2p0fF", "C", :relative => 0.25)

  end

elsif MIM_OPTION == "B"

  if MIM_CAP == "1"

    # mim_1p0fF capacitor
    logger.info("Extracting mim_1p0fF device")
    extract_devices(capacitor("mim_1p0fF", 1.0e-15, MIMCap), { "P1" => mimtm_virtual, "P2" => fuse_cap })
    tolerance("mim_1p0fF", "C", :relative => 0.25)

  elsif MIM_CAP == "1.5"

    # mim_1p5fF capacitor
    logger.info("Extracting mim_1p5fF device")
    extract_devices(capacitor("mim_1p5fF", 1.5e-15, MIMCap), { "P1" => mimtm_virtual, "P2" => fuse_cap })
    tolerance("mim_1p5fF", "C", :relative => 0.25)

  elsif MIM_CAP == "2"

    # mim_single_2p0fF capacitor
    logger.info("Extracting mim_single_2p0fF device")
    extract_devices(capacitor("mim_single_2p0fF", 2.0e-15, MIMCap), { "P1" => mimtm_virtual, "P2" => fuse_cap })
    tolerance("mim_single_2p0fF", "C", :relative => 0.25)

  end

end


#==================================
# ------- MOSCAP EXTRACTION -------
#==================================
logger.info("Starting MOSCAP EXTRACTION")

#nmoscap_3p3
logger.info("Extracting nmoscap_3p3 device")
extract_devices(capacitor("nmoscap_3p3", 4.4e-15, MosCap), { "P1" => nmos_gate_3p3, "P2" => lvpwell_con, "tA" => poly2_con, "tB" => nsd})

#nmoscap_3p3_dw
logger.info("Extracting nmoscap_3p3_dw device")
extract_devices(capacitor("nmoscap_3p3_dw", 4.4e-15, MosCap), { "P1" => nmos_gate_3p3_dw, "P2" => lvpwell_con, "tA" => poly2_con, "tB" => nsd })

#pmoscap_3p3
logger.info("Extracting pmoscap_3p3 device")
extract_devices(capacitor("pmoscap_3p3", 4.4e-15, MosCap), { "P1" => pmos_gate_3p3, "P2" => nwell_con, "tA" => poly2_con, "tB" => psd })

#pmoscap_3p3_dw
logger.info("Extracting pmoscap_3p3_dw device")
extract_devices(capacitor("pmoscap_3p3_dw", 4.4e-15, MosCap), { "P1" => pmos_gate_3p3_dw, "P2" => dnwell, "tA" => poly2_con, "tB" => psd_dw })

#nmoscap_6p0
logger.info("Extracting nmoscap_6p0 device")
extract_devices(capacitor("nmoscap_6p0", 2.3e-15, MosCap), { "P1" => nmos_gate_6p0, "P2" => lvpwell_con, "tA" => poly2_con, "tB" => nsd })

#nmoscap_6p0_dw
logger.info("Extracting nmoscap_6p0_dw device")
extract_devices(capacitor("nmoscap_6p0_dw", 2.3e-15, MosCap), { "P1" => nmos_gate_6p0_dw, "P2" => lvpwell_con, "tA" => poly2_con, "tB" => nsd })

#pmoscap_6p0
logger.info("Extracting pmoscap_6p0 device")
extract_devices(capacitor("pmoscap_6p0", 2.3e-15, MosCap), { "P1" => pmos_gate_6p0, "P2" => nwell_con, "tA" => poly2_con, "tB" => psd })

#pmoscap_6p0
logger.info("Extracting pmoscap_6p0 device")
extract_devices(capacitor("pmoscap_6p0_dw", 2.3e-15, MosCap), { "P1" => pmos_gate_6p0_dw, "P2" => dnwell, "tA" => poly2_con, "tB" => psd_dw  })

# nmoscap_3p3_b capacitor
extract_devices(capacitor("nmoscap_3p3_b", 4.4e-15, MosCap), { "P1" => nmoscap_3p3_b, "P2" => nwell_con, "tA" => poly2_con, "tB" => ntap })

#pmoscap_3p3_b
logger.info("Extracting pmoscap_3p3_b device")
extract_devices(capacitor("pmoscap_3p3_b", 4.4e-15, MosCap), { "P1" => pmoscap_3p3_b, "P2" => ptap, "tA" => poly2_con, "tB" => ptap })

#nmoscap_6p0_b
logger.info("Extracting nmoscap_6p0_b device")
extract_devices(capacitor("nmoscap_6p0_b", 2.3e-15, MosCap), { "P1" => nmoscap_6p0_b, "P2" => nwell_con, "tA" => poly2_con, "tB" => ntap })

#pmoscap_6p0_b
logger.info("Extracting pmoscap_6p0_b device")
extract_devices(capacitor("pmoscap_6p0_b", 2.3e-15, MosCap), { "P1" => pmoscap_6p0_b, "P2" => ptap, "tA" => poly2_con, "tB" => ptap })


#================================
# ------- ESD EXTRACTION --------
#================================
logger.info("Starting MOS SAB EXTRACTION")

# ==============
# ---- PMOS ----
# ==============
logger.info("Starting PMOS SAB EXTRACTION")

#3.3V ESD PMOS transistor outside DNWELL
logger.info("Extracting 3.3V ESD PMOS transistor outside DNWELL device")
extract_devices(mos4("pmos_3p3_sab"), { "SD" => psd, "G" => pgate_sab_3p3v, "tS" => psd, "tD" => psd, "tG" => poly2_con, "W" => nwell_con })

#5V ESD PMOS transistor outside DNWELL
logger.info("Extracting 5V ESD PMOS transistor outside DNWELL device")
extract_devices(mos4("pmos_5p0_sab"), { "SD" => psd, "G" => pgate_sab_5v, "tS" => psd, "tD" => psd, "tG" => poly2_con, "W" => nwell_con })

#6V ESD PMOS transistor outside DNWELL
logger.info("Extracting 6V ESD PMOS transistor outside DNWELL device")
extract_devices(mos4("pmos_6p0_sab"), { "SD" => psd, "G" => pgate_sab_6v, "tS" => psd, "tD" => psd, "tG" => poly2_con, "W" => nwell_con })

#3.3V ESD PMOS transistor inside DNWELL
logger.info("Extracting 3.3V ESD PMOS transistor inside DNWELL device")
extract_devices(mos4("pmos_3p3_dw_sab"), { "SD" => psd_dw, "G" => pgate_dw_sab_3p3v, "tS" => psd_dw, "tD" => psd_dw, "tG" => poly2_con, "W" => dnwell })

#5V ESD PMOS transistor inside DNWELL
logger.info("Extracting 5V ESD PMOS transistor inside DNWELL device")
extract_devices(mos4("pmos_5p0_dw_sab"), { "SD" => psd_dw, "G" => pgate_dw_sab_5v, "tS" => psd_dw, "tD" => psd_dw, "tG" => poly2_con, "W" => dnwell })

#6V ESD PMOS transistor inside DNWELL
logger.info("Extracting 6V ESD PMOS transistor inside DNWELL device")
extract_devices(mos4("pmos_6p0_dw_sab"), { "SD" => psd_dw, "G" => pgate_dw_sab_6v, "tS" => psd_dw, "tD" => psd_dw, "tG" => poly2_con, "W" => dnwell })

# ==============
# ---- NMOS ----
# ==============
logger.info("Starting NMOS SAB EXTRACTION")

#3.3V ESD NMOS transistor outside DNWELL
logger.info("Extracting 3.3V ESD NMOS transistor outside DNWELL device")
extract_devices(mos4("nmos_3p3_sab"), { "SD" => nsd, "G" => ngate_sab_3p3v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => sub })

#5V ESD NMOS transistor outside DNWELL
logger.info("Extracting 5V ESD NMOS transistor outside DNWELL device")
extract_devices(mos4("nmos_5p0_sab"), { "SD" => nsd, "G" => ngate_sab_5v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => sub })

#6V ESD NMOS transistor outside DNWELL
logger.info("Extracting 6V ESD NMOS transistor outside DNWELL device")
extract_devices(mos4("nmos_6p0_sab"), { "SD" => nsd, "G" => ngate_sab_6v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => sub })

#3.3V ESD NMOS transistor inside DNWELL
logger.info("Extracting 3.3V ESD NMOS transistor inside DNWELL device")
extract_devices(mos4("nmos_3p3_dw_sab"), { "SD" => nsd, "G" => ngate_dw_sab_3p3v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => lvpwell_con })

#5V ESD NMOS transistor inside DNWELL
logger.info("Extracting 5V ESD NMOS transistor inside DNWELL device")
extract_devices(mos4("nmos_5p0_dw_sab"), { "SD" => nsd, "G" => ngate_dw_sab_5v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => lvpwell_con })

#6V ESD NMOS transistor inside DNWELL
logger.info("Extracting 6V ESD NMOS transistor inside DNWELL device")
extract_devices(mos4("nmos_6p0_dw_sab"), { "SD" => nsd, "G" => ngate_dw_sab_6v, "tS" => nsd, "tD" => nsd, "tG" => poly2_con, "W" => lvpwell_con })


#================================
# ------ EFUSE EXTRACTIONS ------
#================================
logger.info("Starting EFUSE EXTRACTION")

extract_devices(resistor("efuse", 28.5714), { "R" => efuse_link, "C" => efuse_con_layer, "tA" => anode, "tB" => cathode })
ignore_parameter("efuse", "R")


#================================================
#------------- COMPARISON OPTIONS ---------------
#================================================

logger.info("Starting GF180 LVS comparison section")

#=== FLATTEN CELLS ===
align

#=== NETLIST EXTRACTION ===
if SIMPLIFY
  netlist.simplify
end

#=== NETLIST OPTIONS ===
if NET_ONLY
  netlist
end

if TOP_LVL_PINS
  netlist.make_top_level_pins
end

if COMBINE
  netlist.combine_devices
end

if PURGE
  netlist.purge
end

if PURGE_NETS
  netlist.purge_nets
end

#=== SCHEMATIC OPTIONS ===
if SCH_SIMPLE
  schematic.simplify
end

#=== IGNORE EXTREME VALUES ===
max_res(1e7)
min_caps(1e-16)


compare

exec_end_time = Time.now
run_time = exec_end_time - exec_start_time
logger.info("DRC Total Run time %f seconds" % [run_time])


if ! compare
  logger.info("xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")
  logger.error("ERROR : Netlists don't match")
  logger.info("xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")
else
  logger.info("==========================================")
  logger.info("INFO : Congratulations! Netlists match.")
  logger.info("==========================================")
end