#=============================================================================================================================================================
#------------------------------------------------------- GF 0.18um MCU DRC RULE DECK (H POLY RESISTOR) -------------------------------------------------------
#=============================================================================================================================================================

require 'time'
require "logger"

exec_start_time = Time.now

logger = Logger.new(STDOUT)

logger.formatter = proc do |severity, datetime, progname, msg|
  "#{datetime}: Memory Usage (" + `pmap #{Process.pid} | tail -1`[10,40].strip + ") : #{msg}
"
end

#================================================
#----------------- FILE SETUP -------------------
#================================================

# optional for a batch launch :   klayout -b -r gf180mcu.drc -rd input=design.gds -rd report=gf180mcu_main.lyrdb

logger.info("Starting running GF180MCU Klayout DRC runset on %s" % [$input])

if $input
    if $topcell
        source($input, $topcell)
    else
        source($input)
    end
end

logger.info("Loading database to memory is complete.")

if $report     
    logger.info("GF180MCU Klayout DRC runset output at: %s" % [$report])
    report("DRC Run Report at", $report)
else
    logger.info("GF180MCU Klayout DRC runset output at default location." % [File.join(File.dirname(RBA::CellView::active.filename), "gf180_drc.lyrdb").path])
    report("DRC Run Report at", File.join(File.dirname(RBA::CellView::active.filename), "gf180_drc.lyrdb"))
end

if $thr
    logger.info("Number of threads to use %s" % [$thr])
    threads($thr)
else
    logger.info("Number of threads to use 16")
    threads(16)
end

# === TILING MODE ===
if $run_mode == "tiling" 
  # use a tile size of 1mm - not used in deep mode-
  # tiles(500.um)
  # use a tile border of 10 micron:
  # tile_borders(10.um)
  tiles(1000)
  logger.info("Tiling  mode is enabled.")   

elsif $run_mode == "deep"
  #=== HIER MODE ===
  deep
  logger.info("deep  mode is enabled.")   

elsif $run_mode == "flat"
  #=== FLAT MODE ===
  flat
  logger.info("flat  mode is enabled.")   

else
  #=== FLAT MODE ===
  flat
  logger.info("flat  mode is enabled.") 
  
end # run_mode

#================================================
#------------- LAYERS DEFINITIONS ---------------
#================================================

v5_xtor        = polygons(112, 1 )
dualgate       = polygons(55 , 0 )
poly2          = polygons(30 , 0 )
nplus          = polygons(32 , 0 )
pplus          = polygons(31 , 0 )
comp           = polygons(22 , 0 )
sab            = polygons(49 , 0 )
contact        = polygons(33 , 0 )
resistor       = polygons(62 , 0 )
res_mk         = polygons(110, 5 )

logger.info("Starting deriving base layers.")
#================================================
#------------- LAYERS DERIVATIONS ---------------
#================================================

ncomp      =  comp      & nplus
pcomp      =  comp      & pplus
tgate      =  poly2     & comp
ngate      =  nplus     & tgate
pgate      =  pplus     & tgate

#================================================
#------------------ SWITCHES --------------------
#================================================
logger.info("Evaluate switches.")

# FEOL
if $feol == "false"
  FEOL = $feol
  logger.info("FEOL is disabled.")
else
  FEOL = "true"
  logger.info("FEOL is enabled.")
end # FEOL

# BEOL
if $beol == "false" 
  BEOL = $beol
  logger.info("BEOL is disabled.")
else
  BEOL = "true"
  logger.info("BEOL is enabled.")
end # BEOL

# connectivity rules
if $conn_drc == "true" 
  CONNECTIVITY_RULES = $conn_drc
  logger.info("connectivity rules are enabled.")  
else
  CONNECTIVITY_RULES = false
  logger.info("connectivity rules are disabled.")  
end # connectivity rules

# METAL_TOP
if $metal_top
  METAL_TOP = $metal_top
else
  METAL_TOP = "9K"
end # METAL_TOP

logger.info("METAL_TOP Selected is %s" % [METAL_TOP])

# METAL_LEVEL
if $metal_level
  METAL_LEVEL = $metal_level
else
  METAL_LEVEL = "6LM"
end # METAL_LEVEL

logger.info("METAL_STACK Selected is %s" % [METAL_LEVEL])

# WEDGE
if $wedge == "false"
  WEDGE = $wedge
else
  WEDGE = "true"
end # WEDGE

logger.info("Wedge enabled  %s" % [WEDGE])

# BALL
if $ball == "false"
  BALL = $ball
else
  BALL = "true"
end # BALL

logger.info("Ball enabled  %s" % [BALL])

# GOLD
if $gold == "false"
  GOLD = $gold
else
  GOLD = "true"
end # GOLD

logger.info("Gold enabled  %s" % [GOLD])

if $mim_option
  MIM_OPTION = $mim_option
else
  MIM_OPTION = "Nan"
end

logger.info("MIM Option selected %s" % [MIM_OPTION])

# OFFGRID
if $offgrid == "false"
  OFFGRID = false
else
  OFFGRID = true
end # OFFGRID

logger.info("Offgrid enabled  %s" % [OFFGRID])

#================================================
#----------------H POLY RESISTOR-----------------
#================================================ 

hres_poly = poly2.interacting(pplus).interacting(sab).interacting(res_mk).interacting(resistor)
hres1_poly = poly2.interacting(pplus).interacting(sab).interacting(res_mk)
# Rule HRES.1: Minimum space. Note : Merge if the spacing is less than 0.4 um. is 0.4µm
logger.info("Executing rule HRES.1")
hres1_l1  = resistor.interacting(hres1_poly).space(0.4.um, euclidian).polygons(0.001)
hres1_l1.output("HRES.1", "HRES.1 : Minimum space. Note : Merge if the spacing is less than 0.4 um. : 0.4µm")
hres1_l1.forget 

# Rule HRES.2: Minimum width of Poly2 resistor. is 1µm
logger.info("Executing rule HRES.2")
hres2_l1  = hres_poly.width(1.um, euclidian).polygons(0.001)
hres2_l1.output("HRES.2", "HRES.2 : Minimum width of Poly2 resistor. : 1µm")
hres2_l1.forget 

# Rule HRES.3: Minimum space between Poly2 resistors. is 0.4µm
logger.info("Executing rule HRES.3")
hres3_l1  = hres_poly.space(0.4.um, euclidian).polygons(0.001)
hres3_l1.output("HRES.3", "HRES.3 : Minimum space between Poly2 resistors. : 0.4µm")
hres3_l1.forget 

# Rule HRES.4: Minimum RESISTOR overlap of Poly2 resistor. is 0.4µm
logger.info("Executing rule HRES.4")
hres4_l1 = resistor.enclosing(hres_poly, 0.4.um, euclidian).polygons(0.001)
hres4_l2 = hres_poly.not_outside(resistor).not(resistor)
hres4_l  = hres4_l1.or(hres4_l2)
hres4_l.output("HRES.4", "HRES.4 : Minimum RESISTOR overlap of Poly2 resistor. : 0.4µm")
hres4_l1.forget
hres4_l2.forget
hres4_l.forget

# Rule HRES.5: Minimum RESISTOR space to unrelated Poly2. is 0.3µm
logger.info("Executing rule HRES.5")
hres5_l1  = resistor.interacting(hres1_poly).separation(poly2.not_interacting(sab), 0.3.um, euclidian).polygons(0.001)
hres5_l1.output("HRES.5", "HRES.5 : Minimum RESISTOR space to unrelated Poly2. : 0.3µm")
hres5_l1.forget 

# Rule HRES.6: Minimum RESISTOR space to COMP.
logger.info("Executing rule HRES.6")
hres6_l1 = resistor.interacting(hres1_poly).separation(comp, 0.3.um, euclidian).polygons(0.001).or(comp.not_outside(resistor.interacting(poly2.interacting(pplus).interacting(sab).interacting(res_mk))))
hres6_l1.output("HRES.6", "HRES.6 : Minimum RESISTOR space to COMP.")
hres6_l1.forget

hres1_poly.forget
# Rule HRES.7: Minimum Pplus overlap of contact on Poly2 resistor. is 0.2µm
logger.info("Executing rule HRES.7")
hres7_l1 = pplus.enclosing(contact.inside(hres_poly), 0.2.um, euclidian).polygons(0.001)
hres7_l2 = contact.inside(hres_poly).not_outside(pplus).not(pplus)
hres7_l  = hres7_l1.or(hres7_l2)
hres7_l.output("HRES.7", "HRES.7 : Minimum Pplus overlap of contact on Poly2 resistor. : 0.2µm")
hres7_l1.forget
hres7_l2.forget
hres7_l.forget

# Rule HRES.8: Space from salicide block to contact on Poly2 resistor.
logger.info("Executing rule HRES.8")
hres8_l1 = contact.inside(hres_poly).separation(sab,0.22.um).polygons(0.001).or(contact.inside(hres_poly).interacting(sab))
hres8_l1.output("HRES.8", "HRES.8 : Space from salicide block to contact on Poly2 resistor.")
hres8_l1.forget

hres9_sab             = sab.interacting(pplus).interacting(res_mk).interacting(resistor)
hres9_clear_sab       = hres9_sab.not(hres_poly)
hres9_bad_inside_edge = hres9_sab.edges.inside_part(hres_poly).extended(0,0,0.001,0.001).interacting(hres9_clear_sab, 1, 1)
hres9_sab_hole        = hres9_sab.holes.and(hres_poly)
# Rule HRES.9: Minimum salicide block overlap of Poly2 resistor in width direction.
logger.info("Executing rule HRES.9")
hres9_l1 = hres9_sab.enclosing(hres_poly, 0.28.um, euclidian).polygons(0.001).or(hres9_bad_inside_edge).or(hres9_sab_hole)
hres9_l1.output("HRES.9", "HRES.9 : Minimum salicide block overlap of Poly2 resistor in width direction.")
hres9_l1.forget

hres9_sab.forget
hres9_clear_sab.forget
hres9_bad_inside_edge.forget
hres9_sab_hole.forget
pplus1_hres10 = pplus.and(sab).drc(width != 0.1.um)
pplus2_hres10 = pplus.not_overlapping(sab).edges
# Rule HRES.10: Minimum & maximum Pplus overlap of SAB.
logger.info("Executing rule HRES.10")
hres10_l1 = pplus1_hres10.or(pplus2_hres10).extended(0, 0, 0.001, 0.001).interacting(hres_poly)
hres10_l1.output("HRES.10", "HRES.10 : Minimum & maximum Pplus overlap of SAB.")
hres10_l1.forget

pplus1_hres10.forget
pplus2_hres10.forget
# rule HRES.11 is not a DRC check

mk_hres12a = res_mk.edges.not(poly2.not(pplus).and(sab).edges).inside_part(poly2)
# Rule HRES.12a: P type Poly2 resistor (high sheet rho) shall be covered by RES_MK marking. RES_MK length shall be coincide with resistor length (Defined by Pplus space) and width covering the width of Poly2. 
logger.info("Executing rule HRES.12a")
hres12a_l1 = res_mk.interacting(resistor).interacting(mk_hres12a)
hres12a_l1.output("HRES.12a", "HRES.12a : P type Poly2 resistor (high sheet rho) shall be covered by RES_MK marking. RES_MK length shall be coincide with resistor length (Defined by Pplus space) and width covering the width of Poly2. ")
hres12a_l1.forget

mk_hres12a.forget
hres12b = res_mk.with_area(15000.01.um,nil).in(res_mk.interacting(res_mk.edges.with_length(80.01.um,nil)))
# Rule HRES.12b: If the size of single RES_MK mark layer is greater than 15000 um2 and both side (X and Y) are greater than 80 um. Then the minimum spacing to adjacent RES_MK layer. is 20µm
logger.info("Executing rule HRES.12b")
hres12b_l1 = res_mk.interacting(hres_poly).drc(separation(hres12b) < 20.um).polygons(0.001)
hres12b_l1.output("HRES.12b", "HRES.12b : If the size of single RES_MK mark layer is greater than 15000 um2 and both side (X and Y) are greater than 80 um. Then the minimum spacing to adjacent RES_MK layer. : 20µm")
hres12b_l1.forget

hres12b.forget
hres_poly.forget

exec_end_time = Time.now
run_time = exec_end_time - exec_start_time
logger.info("DRC Run time %f seconds" % [run_time])