# Copyright 2022 GlobalFoundries PDK Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#=======================================================================================================================
#----------------------------------------- GF 0.18 um BCDLite DRC RULE DECK ------------------------------------------------
#=======================================================================================================================
require 'time'
require 'logger'
require 'etc'

exec_start_time = Time.now

logger = Logger.new($stdout)

logger.formatter = proc do |_severity, datetime, _progname, msg|
  "#{datetime}: Memory Usage (" + `pmap #{Process.pid} | tail -1`[10, 40].strip + ") : #{msg}
"
end

#================================================
#----------------- FILE SETUP -------------------
#================================================
logger.info("Starting running GF180BCDLite Klayout DRC runset on #{$input}")
logger.info("Ruby Version for klayout: #{RUBY_VERSION}")

if $input
  if $topcell
    source($input, $topcell)
  else
    source($input)
  end
end

logger.info('Loading database to memory is complete.')

if $report
  logger.info("GF180BCDLite Klayout antenna DRC runset output at: #{$report}")
  report('GF180 ANTENNA DRC Run Report at', $report)
else
  layout_dir = Pathname.new(RBA::CellView.active.filename).parent.realpath
  report_path = layout_dir.join('gf180_drc.lyrdb').to_s
  logger.info("GF180BCDLite Klayout antenna DRC runset output at default location: #{report_path}")
  report('GF180 ANTENNA DRC Run Report at', report_path)
end

#=======================================================================================
#------------------------------------- SWITCHES ----------------------------------------
#=======================================================================================

logger.info('Evaluate switches.')

# threads
if $thr
  threads($thr)
else
  thr ||= Etc.nprocessors
  threads(thr)
end

logger.info("Number of threads to use #{$thr}")

#=== PRINT DETAILS ===
logger.info("Verbose mode: #{$verbose}")
if $verbose == 'true'
  verbose(true)
else
  verbose(false)
end

# === TILING MODE ===
case $run_mode
when 'tiling'
  tiles(500.um)
  tile_borders(10.um)
  logger.info('Tiling  mode is enabled.')

when 'deep'
  #=== HIER MODE ===
  deep
  logger.info('deep  mode is enabled.')
else
  #=== FLAT MODE ===
  flat
  logger.info('flat  mode is enabled.')
end

#======================================================================================================
#--------------------------------------- LAYER DEFINITIONS --------------------------------------------
#======================================================================================================

comp                = polygons(22,  0)
dualgate2_d         = polygons(144, 1)
poly2               = polygons(30,  0)
nplus               = polygons(32,  0)
pplus               = polygons(31,  0)
contact             = polygons(33,  0)
metal1              = polygons(34,  0)
via1                = polygons(35,  0)
metal2              = polygons(36,  0)
via2                = polygons(38,  0)
metal3              = polygons(42,  0)
via3                = polygons(40,  0)
metal4              = polygons(46,  0)
via4                = polygons(41,  0)
metal5              = polygons(81,  0)
via5                = polygons(82,  0)
metaltop            = polygons(53,  0)
fusetop             = polygons(75,  0)
metal_shield        = polygons(35,  28)
metal_shield_via    = polygons(36,  28)
diode_mk            = polygons(115, 5)
ldmos_xtor          = polygons(226, 0 )


#======================================================================================================
#--------------------------------------- LAYER DERIVATIONS --------------------------------------------
#======================================================================================================

tgate      = poly2 & comp
thin_gate  = tgate.not(dualgate2_d)
thick_gate = tgate.and(dualgate2_d)
diode_     = comp & diode_mk

diode_LV = diode_.not_interacting(dualgate2_d).not_interacting(ldmos_xtor)
diode_MV = diode_.interacting(dualgate2_d).not_interacting(ldmos_xtor)
diode_HV = diode_.interacting(dualgate2_d).interacting(ldmos_xtor)

diode = (diode_LV.or(diode_MV)).or(diode_HV)


# === LAYOUT EXTENT ===
CHIP = extent.sized(0.0)

#=======================================================================================
#------------------------------------- SWITCHES ----------------------------------------
#=======================================================================================

logger.info('Evaluate switches.')

if $mim_option
    MIM_OPTION = $mim_option
else
    MIM_OPTION = false
end

logger.info('MIM Option selected %s' % [MIM_OPTION])

# METAL_TOP
if $metal_top
    METAL_TOP = $metal_top
else
    METAL_TOP = '9K'
end

logger.info('METAL_TOP Selected is %s' % [METAL_TOP])

if METAL_TOP == '20K'
    met_top_thick = 2.035.um
    met_shld_thick = 2.035.um

elsif METAL_TOP == '30K'
    met_top_thick = 3.035.um
    met_shld_thick = 3.035.um
else
    met_top_thick = 0.99.um
    met_shld_thick = 0.99.um    
end #METAL_TOP

if $metal_level
    METAL_LEVEL = $metal_level
else
    METAL_LEVEL = '6LM'
end

logger.info('METAL_STACK Selected is %s' % [METAL_LEVEL])

if METAL_LEVEL == '6LM'
    top_via       = via5
    topmin1_via   = via4
    top_metal     = metaltop
    topmin1_metal = metal5
elsif METAL_LEVEL == '5LM'
    top_via       = via4
    topmin1_via   = via3
    top_metal     = metal5
    topmin1_metal = metal4
elsif METAL_LEVEL == '4LM'
    top_via       = via3
    topmin1_via   = via2
    top_metal     = metal4
    topmin1_metal = metal3
elsif METAL_LEVEL == '3LM'
    top_via       = via2
    topmin1_via   = via1
    top_metal     = metal3
    topmin1_metal = metal2
elsif METAL_LEVEL == '2LM'
    top_via       = via1
    topmin1_via   = via1
    top_metal     = metal2
    topmin1_metal = metal1
end #METAL_LEVEL

met_shld_min1 = top_metal

if METAL_LEVEL == '6LM'
    met5_thick = 0.54.um 
else
    met5_thick = 0.54.um
end

#=========================================================================================================================
#---------------------------------------------------- MAIN RUNSET --------------------------------------------------------
#=========================================================================================================================

logger.info('Starting GF180BCDLite ANTENNA DRC rules.')

#========================================
#----------------- POLY -----------------
#========================================
connect(poly2,tgate     )
connect(poly2,thin_gate )
connect(poly2,thick_gate)
# Rule ANT.1: Maximum ratio of Poly2 perimeter area to related gate oxide area is 200
logger.info('Executing rule ANT.1')
antenna_check(tgate,perimeter_only(poly2,0.2.um), 200).output('ANT.1','ANT.1: Maximum ratio of Poly2 perimeter area to related gate oxide area is 200')

#========================================
#--------------- CONTACT ----------------
#========================================
connect(poly2,contact)
connect(diode,contact)
# Rule ANT.8: Maximum ratio of contact area to related gate oxide area is 10
logger.info('Executing rule ANT.8')
antenna_check(tgate, contact, 10).output('ANT.8','ANT.8: Maximum ratio of contact area to related gate oxide area is 10')

#========================================
#---------------- METAL1 ----------------
#========================================
connect(contact,metal1)
# Rule ANT.2_thin : Diode filtering for ANT.2 [thin gate] , MF = 2
logger.info('Executing rule ANT.2_thin')
antenna_check(thin_gate,perimeter_only(metal1,0.54.um), 400,[diode,800]).output('ANT.2_thin','ANT.2_thin: Maximum ratio of Metal1 perimeter area to related thin gate oxide area is 400')

# Rule ANT.2_thick: Diode filtering for ANT.2 [thick gate] , MF = 15
logger.info('Executing rule ANT.2_thick')
antenna_check(thick_gate,perimeter_only(metal1,0.54.um), 400,[diode,6000]).output('ANT.2_thick','ANT.2_thick: Maximum ratio of Metal1 perimeter area to related thick gate oxide area is 400')

#========================================
#----------------- VIA1 -----------------
#========================================
connect(metal1,  via1    )
# Rule ANT.9_thin: Diode filtering for ANT.9 [thin gate]
logger.info('Executing rule ANT.9_thin')
antenna_check(thin_gate,via1, 20,[diode,40]).output('ANT.9_thin','ANT.9_thin: Maximum ratio of Via1 area to related thin gate oxide area is 20')

# Rule ANT.9_thick: Diode filtering for ANT.9 [thick gate]
logger.info('Executing rule ANT.9_thick')
antenna_check(thick_gate,via1, 20,[diode,300]).output('ANT.9_thick','ANT.9_thick: Maximum ratio of Via1 area to related thick gate oxide area is 20')

#========================================
#---------------- METAL2 ----------------
#========================================
connect(via1,    metal2  )
# Rule ANT.3_thin: Diode filtering for ANT.3 [thin gate]
logger.info('Executing rule ANT.3_thin')
antenna_check(thin_gate,perimeter_only(metal2,0.54.um), 400,[diode,800]).output('ANT.3_thin','ANT.3_thin: Maximum ratio of Metal2 perimeter area to related thin gate oxide area is 400')

# Rule ANT.3_thick: Diode filtering for ANT.3 [thick gate]
logger.info('Executing rule ANT.3_thick')
antenna_check(thick_gate,perimeter_only(metal2,0.54.um), 400,[diode,6000]).output('ANT.3_thick','ANT.3_thick: Maximum ratio of Metal2 perimeter area to related thick gate oxide area is 400')

#========================================
#----------------- VIA2 -----------------
#========================================
connect(metal2,  via2    )
# Rule ANT.10_thin: Diode filtering for ANT.10 [thin gate]
logger.info('Executing rule ANT.10_thin')
antenna_check(thin_gate,via2, 20,[diode,40]).output('ANT.10_thin','ANT.10_thin: Maximum ratio of Via2 area to related thin gate oxide area is 20')

# Rule ANT.10_thick: Diode filtering for ANT.10 [thick gate]
logger.info('Executing rule ANT.10_thick')
antenna_check(thick_gate,via2, 20,[diode,300]).output('ANT.10_thick','ANT.10_thick: Maximum ratio of Via2 area to related thick gate oxide area is 20')

#========================================
#---------------- METAL3 ----------------
#========================================
connect(via2,    metal3  )
# Rule ANT.4_thin: Diode filtering for ANT.4 [thin gate]
logger.info('Executing rule ANT.4_thin')
antenna_check(thin_gate,perimeter_only(metal3,0.54.um), 400,[diode,800]).output('ANT.4_thin','ANT.4_thin: Maximum ratio of Metal3 perimeter area to related thin gate oxide area is 400')

# Rule ANT.4_thick: Diode filtering for ANT.4 [thick gate]
logger.info('Executing rule ANT.4_thick')
antenna_check(thick_gate,perimeter_only(metal3,0.54.um), 400,[diode,6000]).output('ANT.4_thick','ANT.4_thick: Maximum ratio of Metal3 perimeter area to related thick gate oxide area is 400')

#========================
#----- MIM OPTION A -----
#========================
if MIM_OPTION == 'A'
    connect(metal3,  fusetop )
    # Rule ANT.14_M3_MIMA: Maximum ratio of each of the metal3 layer perimeter area to related MIM area is 400
    logger.info('Executing rule ANT.14_M3_MIMA')
    antenna_check(fusetop,perimeter_only(metal3,0.54.um), 400,[diode,6000]).output('ANT.14_M3_MIMA','ANT.14_M3_MIMA: Maximum ratio of each of the metal3 layer perimeter area to related MIM area is 400')

    # Rule ANT.15_V2_MIMA: Maximum ratio of each of Via2 area to related MIM area is 20
    logger.info('Executing rule ANT.15_V2_MIMA')
    antenna_check(fusetop, via2, 20,[diode,300]).output('ANT.15_V2_MIMA','ANT.15_V2_MIMA: Maximum ratio of each of Via2 area to related MIM area is 20')
end

#========================================
#----------------- VIA3 -----------------
#========================================
connect(metal3,  via3    )
# Rule ANT.11_thin: Diode filtering for ANT.11 [thin gate]
logger.info('Executing rule ANT.11_thin')
antenna_check(thin_gate,via3, 20,[diode,40]).output('ANT.11_thin','ANT.11_thin: Maximum ratio of Via3 area to related thin gate oxide area is 20')

# Rule ANT.11_thick: Diode filtering for ANT.11 [thick gate]
logger.info('Executing rule ANT.11_thick')
antenna_check(thick_gate,via3, 20,[diode,300]).output('ANT.11_thick','ANT.11_thick: Maximum ratio of Via3 area to related thick gate oxide area is 20')

#========================
#----- MIM OPTION A -----
#========================
if MIM_OPTION == 'A'
    # Rule ANT.15_V3_MIMA: Maximum ratio of each of Via2 area to related MIM area is 20
    logger.info('Executing rule ANT.15_V3_MIMA')
    antenna_check(fusetop, via3, 20,[diode,300]).output('ANT.15_V3_MIMA','ANT.15_V3_MIMA: Maximum ratio of each of Via3 area to related MIM area is 20')
end

#========================================
#---------------- METAL4 ----------------
#========================================
connect(via3,    metal4  )
# Rule ANT.5_thin: Diode filtering for ANT.5 [thin gate]
logger.info('Executing rule ANT.5_thin')
antenna_check(thin_gate,perimeter_only(metal4,0.54.um), 400,[diode,800]).output('ANT.5_thin','ANT.5_thin: Maximum ratio of Metal4 perimeter area to related thin gate oxide area is 400')

# Rule ANT.5_thick: Diode filtering for ANT.5 [thick gate]
logger.info('Executing rule ANT.5_thick')
antenna_check(thick_gate,perimeter_only(metal4,0.54.um), 400,[diode,6000]).output('ANT.5_thick','ANT.5_thick: Maximum ratio of Metal4 perimeter area to related thick gate oxide area is 400')

#========================
#----- MIM OPTION A -----
#========================
if MIM_OPTION == 'A'
    # Rule ANT.14_M4_MIMA: Maximum ratio of each of the metal3 layer perimeter area to related MIM area is 400
    logger.info('Executing rule ANT.15_V3_MIMA')
    antenna_check(fusetop,perimeter_only(metal4,0.54.um), 400,[diode,6000]).output('ANT.14_M4_MIMA','ANT.14_M4_MIMA: Maximum ratio of each of the metal4 layer perimeter area to related MIM area is 400')
end

#========================================
#----------------- VIA4 -----------------
#========================================
connect(metal4,  via4    )
# Rule ANT.12_thin: Diode filtering for ANT.12 [thin gate]
logger.info('Executing rule ANT.12_thin')
antenna_check(thin_gate,via4, 20,[diode,40]).output('ANT.12_thin','ANT.12_thin: Maximum ratio of Via4 area to related thin gate oxide area is 20')

# Rule ANT.12_thick: Diode filtering for ANT.12 [thick gate]
logger.info('Executing rule ANT.12_thick')
antenna_check(thick_gate,via4, 20,[diode,300]).output('ANT.12_thick','ANT.12_thick: Maximum ratio of Via4 area to related thick gate oxide area is 20')

#========================
#----- MIM OPTION A -----
#========================
if MIM_OPTION == 'A'
    # Rule ANT.15_V4_MIMA: Maximum ratio of each of Via2 area to related MIM area is 20
    logger.info('Executing rule ANT.15_V4_MIMA')
    antenna_check(fusetop, via4, 20,[diode,300]).output('ANT.15_V4_MIMA','ANT.15_V4_MIMA: Maximum ratio of each of Via4 area to related MIM area is 20')
end

#========================================
#---------------- METAL5 ----------------
#========================================
connect(via4,    metal5  )
# Rule ANT.6_thin: Diode filtering for ANT.6 [thin gate]
logger.info('Executing rule ANT.6_thin')
antenna_check(thin_gate,perimeter_only(metal5,met5_thick), 400,[diode,800]).output('ANT.6_thin','ANT.6_thin: Maximum ratio of Metal5 perimeter area to related gate oxide area is 400')

# Rule ANT.6_thick: Diode filtering for ANT.6 [thick gate]
logger.info('Executing rule ANT.6_thick')
antenna_check(thick_gate,perimeter_only(metal5,met5_thick), 400,[diode,6000]).output('ANT.6_thick','ANT.6_thick: Maximum ratio of Metal5 perimeter area to related gate oxide area is 400')

#========================================
#----------------- VIA5 -----------------
#========================================
connect(metal5,  via5    )
# Rule ANT.13_thin: Diode filtering for ANT.13 [thin gate]
logger.info('Executing rule ANT.13_thin')
antenna_check(thin_gate,via5, 20,[diode,40]).output('ANT.13_thin','ANT.13_thin: Maximum ratio of Via5 area to related thin gate oxide area is 20')

# Rule ANT.13_thick: Diode filtering for ANT.13 [thick gate]
logger.info('Executing rule ANT.13_thick')
antenna_check(thick_gate,via5, 20,[diode,300]).output('ANT.13_thick','ANT.13_thick: Maximum ratio of Via5 area to related thick gate oxide area is 20')

#========================
#----- MIM OPTION A -----
#========================
if MIM_OPTION == 'A'
    # Rule ANT.15_V5_MIMA: Maximum ratio of each of Via2 area to related MIM area is 20
    logger.info('Executing rule ANT.15_V5_MIMA')
    antenna_check(fusetop, via5, 20,[diode,300]).output('ANT.15_V5_MIMA','ANT.15_V5_MIMA: Maximum ratio of each of Via5 area to related MIM area is 20')
end

#========================================
#--------------- METALTOP ---------------
#========================================
connect(via5,    metaltop)
# Rule ANT.7_thin: Diode filtering for ANT.7 [thin gate]
logger.info('Executing rule ANT.7_thin')
antenna_check(thin_gate,perimeter_only(metaltop,met_top_thick), 400,[diode,800]).output('ANT.7_thin','ANT.7_thin: Maximum ratio of Metaltop perimeter area to related gate oxide area is 400')

# Rule ANT.7_thick: Diode filtering for ANT.7 [thick gate]
logger.info('Executing rule ANT.7_thick')
antenna_check(thick_gate,perimeter_only(metaltop,met_top_thick), 400,[diode,6000]).output('ANT.7_thick','ANT.7_thick: Maximum ratio of Metaltop perimeter area to related gate oxide area is 400')

#========================
#----- MIM OPTION B -----
#========================
if MIM_OPTION == 'B'
    connect(top_metal,  fusetop )
    # Rule ANT.14_MT_MIMB: Maximum ratio of each of the metaltop layer perimeter area to related MIM area is 400
    logger.info('Executing rule ANT.14_MT_MIMB')
    antenna_check(fusetop,perimeter_only(top_metal,met_top_thick), 400,[diode,6000]).output('ANT.14_MT_MIMB','ANT.14_MT_MIMB: Maximum ratio of each of the metaltop layer perimeter area to related MIM area is 400')
end

exec_end_time = Time.now
run_time = exec_end_time - exec_start_time
logger.info('DRC Total Run time %f seconds' % [run_time])


#===================================
#--------------- END ---------------
#===================================