################################################################################################
# Copyright 2022 GlobalFoundries PDK Authors
#
# Licensed under the Apache License, Version 2.0 (the 'License');
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an 'AS IS' BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
################################################################################################

if FEOL

    #================================================
    #---------------------PPLUS----------------------
    #================================================

    # Rule PP.1: min. pplus width is 0.4µm
    logger.info('Executing rule PP.1')
    pp1_l1  = pplus.width(0.4.um, euclidian).polygons(0.001)
    pp1_l1.output('PP.1', 'PP.1 : min. pplus width : 0.4µm')
    pp1_l1.forget

    # Rule PP.2: min. pplus spacing is 0.4µm
    logger.info('Executing rule PP.2')
    pp2_l1  = pplus.space(0.4.um, euclidian).polygons(0.001)
    pp2_l1.output('PP.2', 'PP.2 : min. pplus spacing : 0.4µm')
    pp2_l1.forget

    # Rule PP.3a: Space to NCOMP for NCOMP (1) inside LVPWELL (2) outside NWELL and DNWELL. is 0.16µm
    logger.info('Executing rule PP.3a')
    pp3a_l1  = pplus.separation((ncomp.inside(lvpwell)).or(ncomp.outside(nwell).outside(dnwell)), 0.16.um, euclidian).polygons(0.001)
    pp3a_l1.output('PP.3a', 'PP.3a : Space to NCOMP for NCOMP (1) inside LVPWELL (2) outside NWELL and DNWELL. : 0.16µm')
    pp3a_l1.forget

    pp_3bi = ncomp.edges.not(lvpwell.inside(dnwell).sized(0.429.um))
    # Rule PP.3bi: Space to NCOMP: For Inside DNWELL. (i) NCOMP space to LVPWELL >= 0.43um. is 0.08µm
    logger.info('Executing rule PP.3bi')
    pp3bi_l1  = pplus.inside(dnwell).edges.separation(pp_3bi, 0.08.um, euclidian).polygons(0.001)
    pp3bi_l1.output('PP.3bi', 'PP.3bi : Space to NCOMP: For Inside DNWELL. (i) NCOMP space to LVPWELL >= 0.43um. : 0.08µm')
    pp3bi_l1.forget

    pp_3bi.forget

    pp_3bii = ncomp.edges.and(lvpwell.inside(dnwell).sized(0.429.um))
    # Rule PP.3bii: Space to NCOMP: For Inside DNWELL. (ii) NCOMP space to LVPWELL < 0.43um. is 0.16µm
    logger.info('Executing rule PP.3bii')
    pp3bii_l1  = pplus.inside(dnwell).edges.separation(pp_3bii, 0.16.um, euclidian).polygons(0.001)
    pp3bii_l1.output('PP.3bii', 'PP.3bii : Space to NCOMP: For Inside DNWELL. (ii) NCOMP space to LVPWELL < 0.43um. : 0.16µm')
    pp3bii_l1.forget

    pp_3bii.forget

    pp_3ci_extend = nwell.outside(dnwell).sized(-0.429.um)
    pp_3ci = ncomp.edges.and(pp_3ci_extend)
    # Rule PP.3ci: Space to NCOMP: For Outside DNWELL, inside Nwell: (i) NWELL Overlap of NCOMP >= 0.43um. is 0.08µm
    logger.info('Executing rule PP.3ci')
    pp3ci_l1  = pplus.outside(dnwell).edges.separation(pp_3ci, 0.08.um, euclidian).polygons(0.001)
    pp3ci_l1.output('PP.3ci', 'PP.3ci : Space to NCOMP: For Outside DNWELL, inside Nwell: (i) NWELL Overlap of NCOMP >= 0.43um. : 0.08µm')
    pp3ci_l1.forget

    pp_3ci_extend.forget

    pp_3ci.forget

    pp_3cii_extend = nwell.outside(dnwell).not(nwell.outside(dnwell).sized(-0.429.um))
    pp_3cii = ncomp.edges.and(pp_3cii_extend)
    # Rule PP.3cii: Space to NCOMP: For Outside DNWELL, inside Nwell: (ii) NWELL Overlap of NCOMP 0.43um. is 0.16µm
    logger.info('Executing rule PP.3cii')
    pp3cii_l1  = pplus.outside(dnwell).edges.separation(pp_3cii, 0.16.um, euclidian).polygons(0.001)
    pp3cii_l1.output('PP.3cii', 'PP.3cii : Space to NCOMP: For Outside DNWELL, inside Nwell: (ii) NWELL Overlap of NCOMP 0.43um. : 0.16µm')
    pp3cii_l1.forget

    pp_3cii_extend.forget

    pp_3cii.forget

    # Rule PP.3d: Min/max Pplus overlap of Nplus is 0um.
    logger.info('Executing rule PP.3d')
    pp3d_l1 = pplus.not_outside(nplus)
    pp3d_l1.output('PP.3d', 'PP.3d : Min/max Pplus overlap of Nplus is 0um')
    pp3d_l1.forget

    # Rule PP.3e: Space to NCOMP edge adjacent to a butting edge is 0um.
    logger.info('Executing rule PP.3e')
    pp3e_l1 = pplus.not_outside(ncomp)
    pp3e_l1.output('PP.3e', 'PP.3e : Space to NCOMP edge adjacent to a butting edge is 0um')
    pp3e_l1.forget

    # Rule PP.4a: Space related to N-channel gate at a butting edge parallel to gate. is 0.32µm
    logger.info('Executing rule PP.4a')
    pp4a_l1 = pplus.edges.and(ncomp.edges).separation(ngate.edges, 0.32.um, projection).polygons(0.001)
    pp4a_l1.output('PP.4a', 'PP.4a : Space related to N-channel gate at a butting edge parallel to gate. : 0.32µm')
    pp4a_l1.forget

    pp_4b_poly = poly2.edges.interacting(ngate.edges.not(ncomp.edges)).centers(0, 0.99).and(ngate.sized(0.32.um))
    # Rule PP.4b: Within 0.32um of channel, space to N-channel gate extension perpendicular to the direction of Poly2 is 0.22um
    logger.info('Executing rule PP.4b')
    pp4b_l1 = pplus.interacting(pplus.edges.separation(pp_4b_poly, 0.22.um, projection).polygons(0.001))
    pp4b_l1.output('PP.4b', 'PP.4b : Within 0.32um of channel, space to N-channel gate extension perpendicular to the direction of Poly2: 0.22um')
    pp4b_l1.forget

    pp_4b_poly.forget

    # Rule PP.5a: Overlap of P-channel gate. is 0.23µm
    logger.info('Executing rule PP.5a')
    pp5a_l1 = pplus.enclosing(pgate, 0.23.um, euclidian).polygons(0.001)
    pp5a_l2 = pgate.not_outside(pplus).not(pplus)
    pp5a_l  = pp5a_l1.or(pp5a_l2)
    pp5a_l.output('PP.5a', 'PP.5a : Overlap of P-channel gate. : 0.23µm')
    pp5a_l1.forget
    pp5a_l2.forget
    pp5a_l.forget

    # Rule PP.5b: Extension beyond COMP for COMP (1) Inside NWELL (2) outside LVPWELL but inside DNWELL. is 0.16µm
    logger.info('Executing rule PP.5b')
    pp5b_l1 = pplus.not_outside(nwell).or(pplus.outside(lvpwell).inside(dnwell)).edges.not(nplus).enclosing(comp.edges, 0.16.um, euclidian).polygons(0.001)
    pp5b_l1.output('PP.5b', 'PP.5b : Extension beyond COMP for COMP (1) Inside NWELL (2) outside LVPWELL but inside DNWELL. : 0.16µm')
    pp5b_l1.forget

    pp_5ci_background = pplus.not_outside(lvpwell).inside(dnwell).edges.not(nplus.edges)
    pp_5ci_extend = lvpwell.inside(dnwell).sized(-0.429.um)
    pp_5ci_foreground = pcomp.not_outside(lvpwell).inside(dnwell).edges.not(nplus.edges).inside_part(pp_5ci_extend)
    # Rule PP.5ci: Extension beyond COMP: For Inside DNWELL, inside LVPWELL: (i) For LVPWELL overlap of Pplus >= 0.43um for LVPWELL tap. is 0.02µm
    logger.info('Executing rule PP.5ci')
    pp5ci_l1 = pp_5ci_background.enclosing(pp_5ci_foreground, 0.02.um, euclidian).polygons(0.001)
    pp5ci_l1.output('PP.5ci', 'PP.5ci : Extension beyond COMP: For Inside DNWELL, inside LVPWELL: (i) For LVPWELL overlap of Pplus >= 0.43um for LVPWELL tap. : 0.02µm')
    pp5ci_l1.forget

    pp_5ci_background.forget

    pp_5ci_extend.forget

    pp_5ci_foreground.forget

    pp_5cii_background = pplus.not_outside(lvpwell).inside(dnwell).edges
    pp_5cii_extend = lvpwell.inside(dnwell).not(lvpwell.inside(dnwell).sized(-0.429.um))
    pp_5cii_foreground = pcomp.not_outside(lvpwell).inside(dnwell).edges.not(nplus.edges).and(pp_5cii_extend)
    # Rule PP.5cii: Extension beyond COMP: For Inside DNWELL, inside LVPWELL: (ii) For LVPWELL overlap of Pplus < 0.43um for the LVPWELL tap. is 0.16µm
    logger.info('Executing rule PP.5cii')
    pp5cii_l1 = pp_5cii_background.enclosing(pp_5cii_foreground, 0.16.um, projection).polygons(0.001)
    pp5cii_l1.output('PP.5cii', 'PP.5cii : Extension beyond COMP: For Inside DNWELL, inside LVPWELL: (ii) For LVPWELL overlap of Pplus < 0.43um for the LVPWELL tap. : 0.16µm')
    pp5cii_l1.forget

    pp_5cii_background.forget

    pp_5cii_extend.forget

    pp_5cii_foreground.forget

    pp_5di_background = pplus.outside(dnwell).edges
    pp_5di_foreground = pcomp.outside(dnwell).edges.not(nplus.edges).not(nwell.outside(dnwell).sized(0.429.um))
    # Rule PP.5di: Extension beyond COMP: For Outside DNWELL (i) For Pplus to NWELL space >= 0.43um for Pfield or LVPWELL tap. is 0.02µm
    logger.info('Executing rule PP.5di')
    pp5di_l1 = pp_5di_background.enclosing(pp_5di_foreground, 0.02.um, projection).polygons(0.001)
    pp5di_l1.output('PP.5di', 'PP.5di : Extension beyond COMP: For Outside DNWELL (i) For Pplus to NWELL space >= 0.43um for Pfield or LVPWELL tap. : 0.02µm')
    pp5di_l1.forget

    pp_5di_background.forget

    pp_5di_foreground.forget

    pp_5dii_background = pplus.outside(dnwell).edges
    pp_5dii_foreground = pcomp.outside(dnwell).edges.not(nplus.edges).and(nwell.outside(dnwell).sized(0.429.um))
    # Rule PP.5dii: Extension beyond COMP: For Outside DNWELL (ii) For Pplus to NWELL space < 0.43um for Pfield or LVPWELL tap. is 0.16µm
    logger.info('Executing rule PP.5dii')
    pp5dii_l1 = pp_5dii_background.enclosing(pp_5dii_foreground, 0.16.um, projection).polygons(0.001)
    pp5dii_l1.output('PP.5dii', 'PP.5dii : Extension beyond COMP: For Outside DNWELL (ii) For Pplus to NWELL space < 0.43um for Pfield or LVPWELL tap. : 0.16µm')
    pp5dii_l1.forget

    pp_5dii_background.forget

    pp_5dii_foreground.forget

    # Rule PP.6: Overlap with PCOMP butted to NCOMP. is 0.22µm
    logger.info('Executing rule PP.6')
    pp6_l1 = comp.interacting(pplus).enclosing(ncomp.interacting(pplus), 0.22.um, projection).polygons
    pp6_l1.output('PP.6', 'PP.6 : Overlap with PCOMP butted to NCOMP. : 0.22µm')
    pp6_l1.forget

    # Rule PP.7: Space to unrelated unsalicided Poly2. is 0.18µm
    logger.info('Executing rule PP.7')
    pp7_l1  = pplus.separation(poly2.and(sab), 0.18.um, euclidian).polygons(0.001)
    pp7_l1.output('PP.7', 'PP.7 : Space to unrelated unsalicided Poly2. : 0.18µm')
    pp7_l1.forget

    # Rule PP.8a: Minimum Pplus area (um2). is 0.35µm²
    logger.info('Executing rule PP.8a')
    pp8a_l1  = pplus.with_area(nil, 0.35.um)
    pp8a_l1.output('PP.8a', 'PP.8a : Minimum Pplus area (um2). : 0.35µm²')
    pp8a_l1.forget

    # Rule PP.8b: Minimum area enclosed by Pplus (um2). is 0.35µm²
    logger.info('Executing rule PP.8b')
    pp8b_l1  = pplus.holes.with_area(nil, 0.35.um)
    pp8b_l1.output('PP.8b', 'PP.8b : Minimum area enclosed by Pplus (um2). : 0.35µm²')
    pp8b_l1.forget

    # Rule PP.9: Overlap of unsalicided Poly2. is 0.18µm
    logger.info('Executing rule PP.9')
    pp9_l1 = pplus.enclosing(poly2.not_interacting(resistor).and(sab), 0.18.um, euclidian).polygons(0.001)
    pp9_l2 = poly2.not_interacting(resistor).and(sab).not_outside(pplus).not(pplus)
    pp9_l  = pp9_l1.or(pp9_l2)
    pp9_l.output('PP.9', 'PP.9 : Overlap of unsalicided Poly2. : 0.18µm')
    pp9_l1.forget
    pp9_l2.forget
    pp9_l.forget

    # Rule PP.10: Overlap of unsalicided COMP. is 0.18µm
    logger.info('Executing rule PP.10')
    pp10_l1 = pplus.enclosing(comp.and(sab), 0.18.um, euclidian).polygons(0.001)
    pp10_l1.output('PP.10', 'PP.10 : Overlap of unsalicided COMP. : 0.18µm')
    pp10_l1.forget

    pp_11_in_dnwell = pplus.interacting(pplus.edges.and(ncomp.edges).and(lvpwell.inside(dnwell).sized(0.429.um)))
    pp_11_out_dnwell = pplus.interacting(pplus.edges.and(ncomp.edges).and(nwell.outside(dnwell).not(nwell.outside(dnwell).sized(-0.429.um))))
    # Rule PP.11: Butting Pplus and NCOMP is forbidden within 0.43um of Nwell edge (for outside DNWELL) and of LVPWELL edge (for inside DNWELL case).
    logger.info('Executing rule PP.11')
    pp11_l1 = pp_11_in_dnwell.or(pp_11_out_dnwell)
    pp11_l1.output('PP.11', 'PP.11 : Butting Pplus and NCOMP is forbidden within 0.43um of Nwell edge (for outside DNWELL) and of LVPWELL edge (for inside DNWELL case).')
    pp11_l1.forget

    pp_11_in_dnwell.forget

    pp_11_out_dnwell.forget

    # Rule PP.12: Overlap with N-channel Poly2 gate extension is forbidden within 0.32um of N-channel gate.
    logger.info('Executing rule PP.12')
    pp12_l1 = pplus.interacting(pplus.edges.separation(ngate.edges.and(ncomp.edges), 0.32.um, euclidian).polygons(0.001))
    pp12_l1.output('PP.12', 'PP.12 : Overlap with N-channel Poly2 gate extension is forbidden within 0.32um of N-channel gate.')
    pp12_l1.forget


end #FEOL