RULE NO.,DESCRIPTION ,"LAYOUT 
RULE"
MSLOT.1,Maximum metal width without slotting,30
MSLOT.2,Minimum slot width (slot mark layers),2
MSLOT.3,Slot length (slot mark layers),
,a. Minimum,10
,b. Maximum,250
MSLOT.4,Slot space (slot mark layers),
,a. Minimum,10
,b. Maximum,30
MSLOT.5,Minimum slot (slot mark layers) to metal edge spacing,10
MSLOT.6,"For multiple slots that spans the metal width, slots should be staggered.",
MSLOT.7,Minimum space from via-n to metal-n slot,0.2
MSLOT.8,Minimum space from via-(n-1) / contact to  metal-n slot,0.2
,(a) MetalTop area directly under the Pad,
,(b) MIM bottom plate directly under FuseTop,
,(c) MetalTop directly under FuseWindow_D,
,(d) Metal3 area (for MIM top plate connection) directly enclosed by FuseTop,
,(e) MetalTop area directly under UBM layers,
,Minimum distance to these layers,5
MSLOT.10,"Slot mark layer on the metal hole (same metal level,

e.g. Metal1_Slot on the Metal1 hole) are not allowed",