RULE NO.,DESCRIPTION,Rules
LRES.1,Minimum width of Poly2 resistor,0.8
LRES.2,Minimum space between Poly2 resistors,0.4
LRES.3,Minimum space from Poly2 resistor to COMP,0.6
LRES.4,Minimum space from Poly2 resistor to unrelated Poly2,0.6
LRES.5,Minimum Nplus implant overlap of Poly2 resistor,0.3
LRES.6,Minimum salicide block overlap of Poly2 resistor in width direction,0.28
LRES.7,Space from salicide block to contact on Poly2 resistor,0.22
LRES.8*,Maximum current density of Poly2 resistor (mA/m),1
LRES.9,"Nplus Poly2 resistor shall be covered by RES_MK marking.

RES_MK length shall be coincide with resistor length (Defined by

SAB length) and width covering the width of Poly2.

If the size of single RES_MK mark layer is greater than 15000um2

and both side (X and Y) are greater than 80um. Then the minimum

spacing to adjacent RES_MK layer",20