RULE NO.,DESCRIPTION,LAYOUT RULE
Layer,MT --- MetalTop,
MT.1,Width,0.36/0.44*
MT.2a,Space,0.38/0.46*
MT.2b,Space between wide (length & width > 10um) MetalTop,0.50/0.60*
MT.3,"MetalTop coverage over the entire die shall be >30%

(Refer to section 10.3 for Dummy Metal-fill guidelines. Customer needs

to ensure enough dummy metal to satisfy Metaln coverage) ",
MT.4,Minimum MetalTop area,0.5625μm2