10.6.3 Sample layout of matched pair devices
================================================

**Sample layout of matched pair transistors:**

   - Transistor “A” expected to be matched with transistor “B”

   - Total width of transistor A = 2*W

   - “D” are the dummy transistors not connected to the circuit

    **(a) Cross coupled connection layout**

    .. image:: images/match_pair4.png
        :width: 600
        :align: center
        :alt: Cross coupled connection layout

    **(b) Interleave kind of transistor layout**

    .. image:: images/match_pair5.png
        :width: 600
        :align: center
        :alt:  Interleave kind of transistor layout

**Sample layout of matched pair Capacitors:**

   - Capacitor “A” expected to be matched with Capacitor “B”

   - Total area of capacitor “A” = 2* unit cell area (for Cross couple layout below)

   - “D” are the dummy capacitors not connected to the circuit

    **(a) Cross coupled connection layout**

    .. image:: images/match_pair6.png
        :width: 600
        :align: center
        :alt: Cross coupled connection layout

    **(b) Side by side layout**

    .. image:: images/match_pair7.png
        :width: 600
        :align: center
        :alt: Side by side layout

**Sample layout of matched pair Resistors:**

   - Resistor “A” expected to be matched with Resistor “B”

   - Total length of resistor “A” = 4* L.

   - “D” are the dummy resistors not connected to the circuit

    **(a) Cross coupled type of layout**

    .. image:: images/match_pair8.png
        :width: 600
        :align: center
        :alt: Cross coupled type of layout

    **(b) Non-Interleaved type of layout.**

    .. image:: images/match_pair9.png
        :width: 600
        :align: center
        :alt: Non-Interleaved type of layout