striVe 1000
r_0_X.1b
0 0 2 Apr 23 16:38:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid nwell vertex
r_1_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid diff vertex
r_2_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid dnwell vertex
r_3_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid tap vertex
r_4_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid lvtn vertex
r_5_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid hvtp vertex
r_6_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid hvi vertex
r_7_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid tunm vertex
r_8_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid poly vertex
r_9_X.1b
0 0 2 Apr 23 16:38:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid npc vertex
r_10_X.1b
0 0 2 Apr 23 16:38:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid nsdm vertex
r_11_X.1b
0 0 2 Apr 23 16:38:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid psdm vertex
r_12_X.1b
0 0 2 Apr 23 16:38:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid licon1 vertex
r_13_X.1b
0 0 2 Apr 23 16:38:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid li1 vertex
r_14_X.1b
0 0 2 Apr 23 16:38:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid mcon vertex
r_15_X.1b
0 0 2 Apr 23 16:38:34 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid met1 vertex
r_16_X.1b
0 0 2 Apr 23 16:38:34 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid via vertex
r_17_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid met2 vertex
r_18_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid vhvi vertex
r_19_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid via2 vertex
r_20_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid met3 vertex
r_21_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid via3 vertex
r_22_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid met4 vertex
r_23_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid via4 vertex
r_24_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid met5 vertex
r_25_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid nsm vertex
r_26_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid pad vertex
r_27_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid ldntm vertex
r_28_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid hvntm vertex
r_29_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid pnp vertex
r_30_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid capacitor vertex
r_31_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid ncm vertex
r_32_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid inductor vertex
r_33_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid rpm vertex
r_34_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid hvtr vertex
r_35_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop1 vertex
r_36_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop2 vertex
r_37_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop3 vertex
r_38_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop4 vertex
r_39_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop5 vertex
r_40_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop6 vertex
r_41_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop7 vertex
r_42_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid metop8 vertex
r_43_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NTMdrop vertex
r_44_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LVTNMdrop vertex
r_45_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid HVTPMdrop vertex
r_46_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LI1Mdrop vertex
r_47_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LICM1drop vertex
r_48_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid PSDMdrop vertex
r_49_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NSDMdrop vertex
r_50_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid FOMdrop vertex
r_51_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NTMadd vertex
r_52_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LVTNMadd vertex
r_53_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid HVTPMadd vertex
r_54_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LI1Madd vertex
r_55_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LICM1add vertex
r_56_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid PSDMadd vertex
r_57_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NSDMadd vertex
r_58_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid FOMadd vertex
r_59_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid PMM2mk vertex
r_60_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid CU1Mmk vertex
r_61_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid RPMmk vertex
r_62_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid PBOmk vertex
r_63_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid PDMmk vertex
r_64_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NSMmk vertex
r_65_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid MM5mk vertex
r_66_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid VIM4mk vertex
r_67_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid MM4mk vertex
r_68_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid VIM3mk vertex
r_69_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid MM3mk vertex
r_70_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid VIM2mk vertex
r_71_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid CTM1mk vertex
r_72_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LI1Mmk vertex
r_73_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LICM1mk vertex
r_74_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid PSDMmk vertex
r_75_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NSDMmk vertex
r_76_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LDNTMmk vertex
r_77_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NPCMmk vertex
r_78_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid HVNTMmk vertex
r_79_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NTMmk vertex
r_80_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LVOMmk vertex
r_81_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid ONOMmk vertex
r_82_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid TUNMmk vertex
r_83_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid HVTRMmk vertex
r_84_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid HVTPMmk vertex
r_85_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid LVTNMmk vertex
r_86_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid NWMmk vertex
r_87_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid DNMmk vertex
r_88_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid FOMmk vertex
r_89_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cfom vertex
r_90_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid clvtnm vertex
r_91_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid chvtpm vertex
r_92_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid conom vertex
r_93_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid clvom vertex
r_94_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cntm vertex
r_95_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid chvntm vertex
r_96_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cnpc vertex
r_97_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cnsdm vertex
r_98_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cpsdm vertex
r_99_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cli1m vertex
r_100_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cviam3 vertex
r_101_X.1b
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1b: off 0.005 grid cviam4 vertex
r_102_X.1a
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid P1Mmk vertex
r_103_X.1a
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid P1Madd vertex
r_104_X.1a
0 0 2 Apr 23 16:38:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid P1Mdrop vertex
r_105_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid VIMmk vertex
r_106_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid MM1mk vertex
r_107_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid MM2mk vertex
r_108_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid pmm vertex
r_109_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid rdl vertex
r_110_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid pmm2 vertex
r_111_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid ubm vertex
r_112_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1a: off 0.001 grid bump vertex
r_113_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1: off 0.001 grid capm vertex
r_114_X.1a
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.1: off 0.001 grid cap2m vertex
r_113_X.2
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan diffNOtSealUHVI edge
r_114_X.2
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan tapNotSealUHVI edge
r_115_X.2
0 0 2 Apr 23 16:38:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan poly_noESD_noAnch edge
r_116_X.2
0 0 2 Apr 23 16:38:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan li1Peri_noSEAL_noAnch edge
r_117_X.2
0 0 2 Apr 23 16:38:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan licon_nonSEAL edge
r_118_X.2
0 0 2 Apr 23 16:38:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan mcon_nonSEAL edge
r_119_X.2
0 0 2 Apr 23 16:38:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan via_nonSEAL edge
r_120_X.2
0 0 2 Apr 23 16:38:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan via2_nonSEAL edge
r_121_X.2
0 0 2 Apr 23 16:38:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan via3_nonSEAL edge
r_122_X.2
0 0 2 Apr 23 16:38:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2: non-manhattan via4_nonSEAL edge
r_123_X.2a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.2a: difftap enclosed in areaid.analog must be rectangular
r_124_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal nwell edge
r_125_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal diff edge
r_126_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal dnwell edge
r_127_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal lvtn edge
r_128_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal hvtp edge
r_129_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal hvi edge
r_130_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal tunm edge
r_131_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal npc edge
r_132_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal nsdm edge
r_133_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal psdm edge
r_134_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal met1 edge
r_135_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal met2 edge
r_136_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal vhvi edge
r_137_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal met3 edge
r_138_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal met4 edge
r_139_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal met5 edge
r_140_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal nsm edge
r_141_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal pad edge
r_142_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal ldntm edge
r_143_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal hvntm edge
r_144_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal pnp edge
r_145_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal capacitor edge
r_146_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal ncm edge
r_147_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal inductor edge
r_148_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal rpm edge
r_149_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal hvtr edge
r_150_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop1 edge
r_151_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop2 edge
r_152_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop3 edge
r_153_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop4 edge
r_154_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop5 edge
r_155_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop6 edge
r_156_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop7 edge
r_157_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal metop8 edge
r_158_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NTMdrop edge
r_159_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LVTNMdrop edge
r_160_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal HVTPMdrop edge
r_161_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LI1Mdrop edge
r_162_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LICM1drop edge
r_163_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal PSDMdrop edge
r_164_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NSDMdrop edge
r_165_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal P1Mdrop edge
r_166_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal FOMdrop edge
r_167_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NTMadd edge
r_168_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LVTNMadd edge
r_169_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal HVTPMadd edge
r_170_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LI1Madd edge
r_171_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LICM1add edge
r_172_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal PSDMadd edge
r_173_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NSDMadd edge
r_174_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal P1Madd edge
r_175_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal FOMadd edge
r_176_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cfom edge
r_177_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal clvtnm edge
r_178_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal chvtpm edge
r_179_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal conom edge
r_180_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal clvom edge
r_181_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cntm edge
r_182_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal chvntm edge
r_183_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cnpc edge
r_184_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cnsdm edge
r_185_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cpsdm edge
r_186_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cli1m edge
r_187_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cviam3 edge
r_188_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cviam4 edge
r_189_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal PMM2mk edge
r_190_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal CU1Mmk edge
r_191_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal RPMmk edge
r_192_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal PBOmk edge
r_193_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal PDMmk edge
r_194_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NSMmk edge
r_195_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal MM5mk edge
r_196_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal VIM4mk edge
r_197_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal MM4mk edge
r_198_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal VIM3mk edge
r_199_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal MM3mk edge
r_200_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal VIM2mk edge
r_201_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal MM2mk edge
r_202_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal VIMmk edge
r_203_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal MM1mk edge
r_204_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal CTM1mk edge
r_205_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LI1Mmk edge
r_206_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LICM1mk edge
r_207_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal PSDMmk edge
r_208_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NSDMmk edge
r_209_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LDNTMmk edge
r_210_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NPCMmk edge
r_211_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal HVNTMmk edge
r_212_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NTMmk edge
r_213_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal P1Mmk edge
r_214_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LVOMmk edge
r_215_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal ONOMmk edge
r_216_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal TUNMmk edge
r_217_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal HVTRMmk edge
r_218_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal HVTPMmk edge
r_219_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal LVTNMmk edge
r_220_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal NWMmk edge
r_221_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal DNMmk edge
r_222_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal FOMmk edge
r_223_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal tap_SEAL edge
r_224_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal tap_ENID edge
r_225_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal poly_ESD edge
r_226_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal "li1" in core edge
r_227_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal li1_SEAL edge
r_228_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal licon_SEAL edge
r_229_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal mcon_SEAL edge
r_230_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal via_SEAL edge
r_231_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal via2_SEAL edge
r_232_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal via3_SEAL edge
r_233_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal capm edge
r_234_X.3a
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.3a: non-octagonal cap2m edge
r_233_X.5
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: met5Pin must be enclosed by met5
r_234_X.5
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: met4Pin must be enclosed by met4
r_235_X.5
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: met3Pin must be enclosed by met3
r_236_X.5
0 0 2 Apr 23 16:38:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: met2Pin must be enclosed by met2
r_237_X.5
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: met1Pin must be enclosed by met1
r_238_X.5
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: li1Pin must be enclosed by li1
r_239_X.5
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: polyPin must be enclosed by poly
r_240_X.5
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.5: diffPin must be enclosed by diff
r_241_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: NTMdrop must be enclosed by COREID
r_242_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: LVTNMdrop must be enclosed by COREID
r_243_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: HVTPMdrop must be enclosed by COREID
r_244_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: LI1Mdrop must be enclosed by COREID
r_245_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: LICM1drop must be enclosed by COREID
r_246_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: PSDMdrop must be enclosed by COREID
r_247_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: NSDMdrop must be enclosed by COREID
r_248_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: P1Mdrop must be enclosed by COREID
r_249_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: NTMadd must be enclosed by COREID
r_250_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: LVTNMadd must be enclosed by COREID
r_251_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: HVTPMadd must be enclosed by COREID
r_252_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: LI1Madd must be enclosed by COREID
r_253_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: LICM1add must be enclosed by COREID
r_254_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: PSDMadd must be enclosed by COREID
r_255_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: NSDMadd must be enclosed by COREID
r_256_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: P1Madd must be enclosed by COREID
r_257_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: FOMadd must be enclosed by COREID
r_258_X.9
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.9: FOM outside advSeal_6um must be enclosed by COREID
r_259_X.10
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.10: diffres must not overlap licon1
r_260_X.10
0 0 2 Apr 23 16:38:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.10: polyres must not overlap licon1
r_261_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.635 min. spacing of moduleCutAREA & q0nwellnotBuildSpace
r_262_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.635 min. enclosure of q0nwellnotBuildSpace by moduleCutAREA
r_263_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.135 min. spacing of moduleCutAREA & q0diffnotBuildSpace
r_264_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.135 min. enclosure of q0diffnotBuildSpace by moduleCutAREA
r_265_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 3.15 min. spacing of moduleCutAREA & q0dnwellnotBuildSpace
r_266_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 3.15 min. enclosure of q0dnwellnotBuildSpace by moduleCutAREA
r_267_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.135 min. spacing of moduleCutAREA & q0tapnotBuildSpace
r_268_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.135 min. enclosure of q0tapnotBuildSpace by moduleCutAREA
r_269_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0lvtnnotBuildSpace
r_270_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0lvtnnotBuildSpace by moduleCutAREA
r_271_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0hvtpnotBuildSpace
r_272_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0hvtpnotBuildSpace by moduleCutAREA
r_273_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.35 min. spacing of moduleCutAREA & q0hvinotBuildSpace
r_274_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.35 min. enclosure of q0hvinotBuildSpace by moduleCutAREA
r_275_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.25 min. spacing of moduleCutAREA & q0tunmnotBuildSpace
r_276_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.25 min. enclosure of q0tunmnotBuildSpace by moduleCutAREA
r_277_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.105 min. spacing of moduleCutAREA & q0polynotBuildSpace
r_278_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.105 min. enclosure of q0polynotBuildSpace by moduleCutAREA
r_279_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.135 min. spacing of moduleCutAREA & q0npcnotBuildSpace
r_280_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.135 min. enclosure of q0npcnotBuildSpace by moduleCutAREA
r_281_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0nsdmnotBuildSpace
r_282_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0nsdmnotBuildSpace by moduleCutAREA
r_283_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0psdmnotBuildSpace
r_284_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0psdmnotBuildSpace by moduleCutAREA
r_285_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.085 min. spacing of moduleCutAREA & q0licon1notBuildSpace
r_286_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.085 min. enclosure of q0licon1notBuildSpace by moduleCutAREA
r_287_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.085 min. spacing of moduleCutAREA & q0li1notBuildSpace
r_288_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.085 min. enclosure of q0li1notBuildSpace by moduleCutAREA
r_289_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.095 min. spacing of moduleCutAREA & q0mconnotBuildSpace
r_290_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.095 min. enclosure of q0mconnotBuildSpace by moduleCutAREA
r_291_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.07 min. spacing of moduleCutAREA & q0met1notBuildSpace
r_292_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.07 min. enclosure of q0met1notBuildSpace by moduleCutAREA
r_293_X.12a
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.085 min. spacing of moduleCutAREA & q0vianotBuildSpace
r_294_X.12b
0 0 2 Apr 23 16:40:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.085 min. enclosure of q0vianotBuildSpace by moduleCutAREA
r_295_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.07 min. spacing of moduleCutAREA & q0met2notBuildSpace
r_296_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.07 min. enclosure of q0met2notBuildSpace by moduleCutAREA
r_297_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.1 min. spacing of moduleCutAREA & q0via2notBuildSpace
r_298_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.1 min. enclosure of q0via2notBuildSpace by moduleCutAREA
r_299_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.15 min. spacing of moduleCutAREA & q0met3notBuildSpace
r_300_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.15 min. enclosure of q0met3notBuildSpace by moduleCutAREA
r_301_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.1 min. spacing of moduleCutAREA & q0via3notBuildSpace
r_302_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.1 min. enclosure of q0via3notBuildSpace by moduleCutAREA
r_303_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.15 min. spacing of moduleCutAREA & q0met4notBuildSpace
r_304_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.15 min. enclosure of q0met4notBuildSpace by moduleCutAREA
r_305_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.4 min. spacing of moduleCutAREA & q0via4notBuildSpace
r_306_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.4 min. enclosure of q0via4notBuildSpace by moduleCutAREA
r_307_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.8 min. spacing of moduleCutAREA & q0met5notBuildSpace
r_308_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.8 min. enclosure of q0met5notBuildSpace by moduleCutAREA
r_309_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 2 min. spacing of moduleCutAREA & q0nsmnotBuildSpace
r_310_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 2 min. enclosure of q0nsmnotBuildSpace by moduleCutAREA
r_311_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.635 min. spacing of moduleCutAREA & q0padnotBuildSpace
r_312_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.635 min. enclosure of q0padnotBuildSpace by moduleCutAREA
r_313_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.35 min. spacing of moduleCutAREA & q0ldntmnotBuildSpace
r_314_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.35 min. enclosure of q0ldntmnotBuildSpace by moduleCutAREA
r_315_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0hvntmnotBuildSpace
r_316_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0hvntmnotBuildSpace by moduleCutAREA
r_317_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0ncmnotBuildSpace
r_318_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0ncmnotBuildSpace by moduleCutAREA
r_319_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 5 min. spacing of moduleCutAREA & q0rdlnotBuildSpace
r_320_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 5 min. enclosure of q0rdlnotBuildSpace by moduleCutAREA
r_321_X.12a
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12a: 0.19 min. spacing of moduleCutAREA & q0hvtrnotBuildSpace
r_322_X.12b
0 0 2 Apr 23 16:40:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12b: 0.19 min. enclosure of q0hvtrnotBuildSpace by moduleCutAREA
r_323_X.12d
0 0 2 Apr 23 16:41:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12d: 0.14 min. spacing of moduleCutAREA & q1met1notBuildSpace
r_324_X.12e
0 0 2 Apr 23 16:41:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12e: 0.14 min. enclosure of q1met1notBuildSpace by moduleCutAREA
r_325_X.12d
0 0 2 Apr 23 16:41:04 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12d: 0.14 min. spacing of moduleCutAREA & q1met2notBuildSpace
r_326_X.12e
0 0 2 Apr 23 16:41:04 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12e: 0.14 min. enclosure of q1met2notBuildSpace by moduleCutAREA
r_327_X.12d
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12d: 0.2 min. spacing of moduleCutAREA & q1met3notBuildSpace
r_328_X.12e
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12e: 0.2 min. enclosure of q1met3notBuildSpace by moduleCutAREA
r_329_X.12d
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12d: 0.2 min. spacing of moduleCutAREA & q1met4notBuildSpace
r_330_X.12e
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12e: 0.2 min. enclosure of q1met4notBuildSpace by moduleCutAREA
r_331_X.12e
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.12e: 0.42 min. spacing of moduleCutAREA & capm
r_326_X.18b
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.18b: 0.42 min. enclosure of capm by moduleCutAREA
r_327_X.18a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.18a: 0.42 min. spacing of moduleCutAREA & cap2m
r_328_X.18b
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.18b: 0.42 min. enclosure of cap2m by moduleCutAREA
r_331_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cfom allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_332_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer clvtnm allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_333_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer chvtpm allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_334_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer conom allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_335_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer clvom allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_336_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cntm allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_337_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer chvntm allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_338_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cnpc allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_339_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cnsdm allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_340_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cpsdm allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_341_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cli1m allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_342_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cviam3 allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_343_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer cviam4 allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_344_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer PMM2mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_345_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer CU1Mmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_346_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer RPMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_347_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer PBOmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_348_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer PDMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_349_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer NSMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_350_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer MM5mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_351_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer VIM4mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_352_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer MM4mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_353_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer VIM3mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_354_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer MM3mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_355_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer VIM2mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_356_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer MM2mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_357_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer VIMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_358_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer MM1mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_359_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer CTM1mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_360_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer LI1Mmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_361_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer LICM1mk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_362_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer PSDMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_363_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer NSDMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_364_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer LDNTMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_365_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer NPCMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_366_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer HVNTMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_367_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer NTMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_368_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer P1Mmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_369_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer LVOMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_370_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer ONOMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_371_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer TUNMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_372_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer HVTRMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_373_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer HVTPMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_374_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer LVTNMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_375_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer NWMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_376_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer DNMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_377_X.15a
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.15a: X.15a: layer FOMmk allowed inside areaid:mt or inside areaid.sl or inside areaid.ft
r_378_X.16
0 0 2 Apr 23 16:41:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.16: extentDie must not overlap moduleCutAREA
r_379_X.19
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.19: SEAL ring is not at origin (0,0)
r_380_X.21
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.21: prune must overlap areaidMTorSC
r_381_X.23b
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23b: diff must not straddle SEALID
r_382_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: tap must not overlap SEALID
r_383_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: poly must not overlap SEALID
r_384_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: li1 must not overlap SEALID
r_385_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: met1 must not overlap SEALID
r_386_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: met2 must not overlap SEALID
r_387_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: met3 must not overlap SEALID
r_388_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: met4 must not overlap SEALID
r_389_X.23c
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.23c: met5 must not overlap SEALID
r_390_X.26
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.26: SEALID_6um must overlap diff
r_391_X.25
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.25: pnp layer must be within specified fixed layout cells s8rf_pnp/s8rf_pnp5x
r_392_X.28
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.28: 6 min. width of SEALID
r_393_dnwell.2
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.2: 3 min. width of dnwell
r_394_dnwell.3
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.3: 6.3 min. spacing/notch of dnwellNotPhotoNotUHVI
r_395_dnwell.4
0 0 2 Apr 23 16:41:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.4: dnwell must not overlap pnp
r_396_dnwell.5
0 0 2 Apr 23 16:41:08 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.5: PDIFF not Exempt cells must not straddle dnwell
r_397_dnwell.7
0 0 2 Apr 23 16:41:08 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.7: dnwell cannot straddle localSub
r_398_nwell.1
0 0 2 Apr 23 16:41:08 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.1: 0.84 min. width of nwell
r_399_nwell.2a
0 0 2 Apr 23 16:41:08 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.2a: 1.27 min. spacing/notch of nwell
r_400_nwell.4
0 0 2 Apr 23 16:41:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.4: nwell_nonUHVI must overlap metal contacted tap to nwell
r_401_nwell.5
0 0 2 Apr 23 16:41:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.5: 0.4 min. enclosure of dnwellNotTechCDLOWVTID by filledNwell
r_402_nwell.5
0 0 2 Apr 23 16:41:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.5: dnwellNotTechCDLOWVTID must be enclosed by filledNwell
r_403_nwell.6
0 0 2 Apr 23 16:41:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.6: 1.03 min enclosure of nwellHole by dnwell
r_404_nwell.7
0 0 2 Apr 23 16:41:10 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.7: 4.5 min spacing between nwell and dnwell on separate nets
r_405_hvtp.1
0 0 2 Apr 23 16:41:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.1: 0.38 min. width of hvtp
r_406_hvtp.2
0 0 2 Apr 23 16:41:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.2: 0.38 min. spacing/notch of hvtp
r_407_hvtp.3
0 0 2 Apr 23 16:41:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.3: 0.18 min. enclosure of PFET_PERI by hvtp
r_408_hvtp.4
0 0 2 Apr 23 16:41:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.4: 0.18 min. spacing of PFET_PERI & hvtp
r_409_hvtp.5
0 0 2 Apr 23 16:41:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.5: 0.265 min. area of hvtp
r_410_hvtp.6
0 0 2 Apr 23 16:41:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.6: 0.265 min. area of hvtpHoles
r_411_hvtp.c1
0 0 2 Apr 23 16:41:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtp.c1: Min/Max enclosure of nwell by hvtp 
r_412_lvtn.1a
0 0 2 Apr 23 16:41:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.1a: 0.38 min. width of lvtn
r_413_lvtn.2
0 0 2 Apr 23 16:41:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.2: 0.38 min. spacing/notch of lvtn
r_414_lvtn.3a
0 0 2 Apr 23 16:41:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.3a: 0.18 min. spacing of Gate in Periphery outside UHVI layer & "lvtn" in periphery
r_415_lvtn.3b
0 0 2 Apr 23 16:41:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.3b: 0.19 min spacing of lvtn(peri) to pfet along S/D direction
r_416_lvtn.4b
0 0 2 Apr 23 16:41:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.4b: 0.18 min. enclosure of Gate in Periphery outside UHVI layer by "lvtn" in periphery
r_417_lvtn.9
0 0 2 Apr 23 16:41:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.9: 0.38 min. spacing of lvtn & hvtp
r_418_lvtn.9
0 0 2 Apr 23 16:41:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.9: lvtn must not overlap hvtp
r_419_lvtn.10
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.10: 0.38 min enclosure of lvtn by (nwell not overlapping Varactor Channel)
r_420_lvtn.12
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.12: 0.38 min. spacing of lvtn & coreNwell
r_421_lvtn.13
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.13: 0.265 min. area of lvtn
r_422_lvtn.14
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
lvtn.14: 0.265 min. area of lvtnHoles
r_423_hvtr.1
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtr.1: 0.38 min. width of hvtr
r_424_hvtr.2
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtr.2: 0.38 min. spacing of hvtr & hvtp
r_425_hvtr.2
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtr.2: hvtr must not overlap hvtp
r_426_hvtr.3
0 0 2 Apr 23 16:41:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvtr.3: 0.18 min. enclosure of PFET by hvtr
r_427_difftap.1
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.1: 0.15 min. width of diff across areaid:ce
r_428_difftap.1
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.1: 0.15 min. width of diff in PERI
r_429_difftap.c1
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c1: 0.14 min. width of diff in COREID
r_430_difftap.1
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.1: 0.15 min. width of tap across areaid:ce
r_431_difftap.1
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.1: 0.15 min. width of tap in PERI
r_432_difftap.c1
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c1: 0.14 min. width of tap in COREID
r_433_difftap.2
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.2: 0.42 min. width of GATE_PERI_noSC
r_434_difftap.2b
0 0 2 Apr 23 16:41:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.2b: 0.36 min. width of GATE_PERI_SC
r_435_difftap.3
0 0 2 Apr 23 16:41:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.3: 0.27 min. spacing/notch of diff or tap
r_436_difftap.4
0 0 2 Apr 23 16:41:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.4: 0.29 min. width of tap butting diff
r_437_difftap.5
0 0 2 Apr 23 16:41:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.5: 0.4 min. width of "tap" in periphery butting & between diff
r_438_difftap.6
0 0 2 Apr 23 16:41:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.6: diff and tap are not allowed to extend beyond their abutting edge
r_439_difftap.7
0 0 2 Apr 23 16:41:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.7: 0.13 spacing of diff/tap butting edge to non-coincident diff/tap edge
r_440_difftap.8
0 0 2 Apr 23 16:41:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.8: 0.18 min. enclosure of PDIFF_PERI_nonESDuhvi by nwell
r_441_difftap.9
0 0 2 Apr 23 16:41:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.9: 0.34 min. spacing of NDIFF_PERI_nonESDuhvi & nwell_noesd
r_442_difftap.10
0 0 2 Apr 23 16:41:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.10: 0.18 min. enclosure of NTAP_nonESD_nonuhvi by nwell
r_443_difftap.11
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.11: 0.13 min. spacing of PTAP_nonUHVI & nwell
r_444_difftap.c1
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c1: 0.14 min. width of "gate" in core
r_445_difftap.c5
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c5: 0.38 min. width of "tap" in core butting & between diff
r_446_difftap.c8
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c8: 0.15 min. enclosure of "pdiff" in core by nwell
r_447_difftap.c10
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c10: 0.15 min. enclosure of "ntap" in core by nwell
r_448_difftap.c12
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c12: 0.18 min. enclosure of adj. sides of "pdiff" in core by nwell
r_449_difftap.c13
0 0 2 Apr 23 16:41:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c13: 0.32 min. spacing of "ndiff" in core & nwell
r_450_difftap.c14
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c14: 0.34 min. enclosure of adj. sides of "ndiff" in core by chipNotNwell
r_451_tunm.1
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.1: 0.41 min. width of tunm
r_452_tunm.2
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.2: 0.5 min. spacing/notch of tunm
r_453_tunm.3
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.3: 0.095 min. extension of tunm beyond gate
r_454_tunm.4
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.4: 0.095 min. spacing of GATE_outsidetunm & tunm
r_455_tunm.5
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.5: gate must not straddle tunm
r_456_tunm.6a
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.6a: tunm outside deep nwell is not allowed 
r_457_tunm.7
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.7: 0.672 min. area of tunm
r_458_tunm.8
0 0 2 Apr 23 16:41:24 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
tunm.8: tunm must be enclosed by COREID
r_459_nsd.1
0 0 2 Apr 23 16:41:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.1: 0.38 min. width of nsdm across areaid:ce
r_460_nsd.1
0 0 2 Apr 23 16:41:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.1: 0.38 min. width of nsdm in PERI
r_461_nsd.c1b
0 0 2 Apr 23 16:41:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.c1b: 0.29 min. width of nsdm in COREID
r_462_nsd.2
0 0 2 Apr 23 16:41:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.2: 0.38 min. spacing/notch of "nsdm" in periphery
r_463_nsd.2
0 0 2 Apr 23 16:41:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.2: 0.38 min. spacing of nsdm across COREID boundary
r_464_nsd.5a
0 0 2 Apr 23 16:41:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.5a: 0.125 min. enclosure of n+ diff by nsdm
r_465_nsd.5b
0 0 2 Apr 23 16:41:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.5b: 0.125 min. enclosure of n+ tap in peri by nsdm
r_466_nsd.7
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.7: 0.13 min. spacing of nsdm & opposite implant diffTap
r_467_nsd.8
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.8: nsdm must not overlap pdiff/ptap (source of extendedDrain fet exempted)
r_468_nsd.9
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.9: ndiff/ntap (source of extendedDrain fet and gated_npn exempted) must be enclosed by nsdmZENERID
r_469_nsd.10a
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.10a: 0.265 min. area of nsdm
r_470_nsd.11
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.11: 0.265 min. area of nsdmHole
r_471_nsd.c1a
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.c1a: 0.38 min. width of nsdm (opposite parallel)
r_472_nsd.c2a
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.c2a: 0.38 min. spacing/notch of "nsdm" in core
r_473_nsd.c2b
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.c2b: 0.29 min. spacing/notch of "nsdm" in core
r_474_nsd.c5a
0 0 2 Apr 23 16:41:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsd.c5a: 0.13 min. enclosure of n+ tap in core by nsdm
r_475_psd.1
0 0 2 Apr 23 16:41:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.1: 0.38 min. width of psdm across areaid:ce
r_476_psd.1
0 0 2 Apr 23 16:41:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.1: 0.38 min. width of psdm in PERI
r_477_psd.c1b
0 0 2 Apr 23 16:41:40 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.c1b: 0.29 min. width of psdm in COREID
r_478_psd.2
0 0 2 Apr 23 16:41:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.2: 0.38 min. spacing/notch of "psdm" in periphery
r_479_psd.2
0 0 2 Apr 23 16:41:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.2: 0.38 min. spacing of psdm across COREID boundary
r_480_psd.5a
0 0 2 Apr 23 16:41:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.5a: 0.125 min. enclosure of p+ diff by psdm
r_481_psd.5b
0 0 2 Apr 23 16:41:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.5b: 0.125 min. enclosure of p+ tap in peri by psdm
r_482_psd.7
0 0 2 Apr 23 16:41:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.7: 0.13 min. spacing of psdm & opposite implant diffTap
r_483_psd.8
0 0 2 Apr 23 16:41:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.8: psdm must not overlap ndiff/ntap (source of extendedDrain fet exempted)
r_484_psd.9
0 0 2 Apr 23 16:41:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.9: pdiff/ptap (source of extendedDrain fet exempted) must be enclosed by psdmZENERID
r_485_psd.10b
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.10b: 0.255 min. area of psdm
r_486_psd.11
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.11: 0.265 min. area of psdmHole
r_487_psd.c1a
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.c1a: 0.38 min. width of psdm (opposite parallel)
r_488_psd.c2a
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.c2a: 0.38 min. spacing/notch of "psdm" in core
r_489_psd.c2b
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.c2b: 0.29 min. spacing/notch of "psdm" in core
r_490_psd.c5b
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
psd.c5b: 0.12 min. enclosure of p+ tap in core by psdm
r_491_hvi.1
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvi.1: 0.6 min. width of hvi_peri
r_492_hvi.2a
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvi.2a: 0.7 min. spacing/notch of hvi_peri
r_493_hvi.4
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvi.4: hvi must not overlap tunm
r_494_hvi.5
0 0 2 Apr 23 16:41:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvi.5: 0.7 min. spacing between non-butting hvi and nwell
r_495_nwell.8
0 0 2 Apr 23 16:41:49 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.8: 2 min. spacing of HV_nwell & nwell
r_496_hv.nwell.1
0 0 2 Apr 23 16:41:49 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.nwell.1: 2.5 min. spacing of nwell with text (shv_nwell) & nwell
r_497_nwell.9
0 0 2 Apr 23 16:41:50 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.9: HVnwell must be enclosed by hvi
r_498_nwell.10
0 0 2 Apr 23 16:41:52 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.10: LVnwell should not be on the same net as HVnwell
r_499_difftap.14
0 0 2 Apr 23 16:41:52 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.14: 0.29 min. width of Hdiff in periphery not Hv Pdiff Res
r_500_difftap.14a
0 0 2 Apr 23 16:41:52 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.14a: 0.15 min. width of Hv Pdiff Res in periphery
r_501_difftap.15a
0 0 2 Apr 23 16:41:52 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.15a: 0.3 min. spacing/notch of Hdiff in periphery
r_502_difftap.15b
0 0 2 Apr 23 16:41:53 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.15b: 0.37 min. spacing of n+ diff inside hvi in periphery & ptapHV_PERI_noAbut
r_503_difftap.16
0 0 2 Apr 23 16:41:53 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.16: 0.7 min. width of tapHV butting diffHV_noUHVI
r_504_difftap.16
0 0 2 Apr 23 16:41:53 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.16: 0.7 min. width of tapHV_noUHVI butting & between Hdiff
r_505_difftap.17
0 0 2 Apr 23 16:41:53 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.17: 0.33 min. enclosure of p+ Hdiff (no ESD)(no UHVI) by HV_nwell
r_506_difftap.18
0 0 2 Apr 23 16:41:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.18: 0.43 min. spacing of ndiff_nonESDuhvi & HV_nwell
r_507_difftap.19
0 0 2 Apr 23 16:41:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.19: 0.33 min. enclosure of n+ Htap (no ESD)(no UHVI) by HV_nwell
r_508_difftap.20
0 0 2 Apr 23 16:41:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.20: 0.43 min. spacing of PTAP_noPwellRes_noUHVI & HV_nwell
r_509_difftap.21
0 0 2 Apr 23 16:41:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.21: "diffTap" in periphery must not straddle hvi
r_510_difftap.22
0 0 2 Apr 23 16:41:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.22: 0.18 min. enclosure of Hdiff/Htap in periphery without UHVI by hvi
r_511_difftap.23
0 0 2 Apr 23 16:41:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.23: 0.18 min. spacing of diffTapNoHv_PERI & hvi
r_512_difftap.24
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.24: 0.43 min. spacing of ndiffHV_nonESDuhvi & nwell
r_513_difftap.c11
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.c11: 0.15 min. width of Hdiff in COREID
r_514_poly.13
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.13: 0.5 min. width of poly over diff inside hvi in periphery
r_515_poly.14
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.14: gate must not straddle hvi
r_516_poly.1a
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.1a: 0.15 min. width of poly
r_517_poly.1b
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.1b: poly.1b: 0.350 min. channel length of pfet overlapping lvtn 
r_518_poly.2
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.2: 0.21 min. spacing/notch of "poly" in periphery
r_519_poly.2
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.2: 0.21 min. spacing of poly2noXmt across COREID boundary
r_520_poly.c3
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.c3: poly.c3: 0.175 min. spacing of poly (except for poly.c2)
r_521_poly.c2
0 0 2 Apr 23 16:41:56 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.c2: poly.c2: 0.160 min. spacing of poly for poly core gap
r_522_poly.3
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.3: 0.33 min. width of poly resistor
r_523_poly.4
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.4: 0.075 min. spacing of "poly" in periphery & diff
r_524_poly.5
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.5: 0.055 min. spacing of "poly" in periphery & tap
r_525_poly.6
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.6: 0.3 min. extension of diff edge butting tap beyond gate edge in periphery
r_526_poly.7
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.7: 0.25 min. extension of diff beyond gate edge in periphery
r_527_poly.8
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.8: 0.13 min. extension of poly beyond gate end in periphery
r_528_poly.9
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.9: 0.48 min. spacing of poly resistor & diffTap
r_529_poly.9
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.9: poly resistor must not overlap diffTap
r_530_poly.9
0 0 2 Apr 23 16:41:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.9: 0.48 min. spacing of poly resistor & poly
r_531_poly.10
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.10: poly must not overlap any inner corner of diff
r_532_poly.11
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.11: No 90 degree bends of poly on diff
r_533_poly.12
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.12: PolyNotLvNwellnoUHVI must not overlap "tap" in periphery
r_534_poly.15
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.15: poly must not overlap diffres
r_535_poly.c1
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.c1: 0.03 min. spacing of "poly" in core & diff
r_536_poly.c1
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.c1: 0.03 min. spacing of "poly" in core & tap
r_537_dnwell.6
0 0 2 Apr 23 16:41:58 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.6: rfNMOS must be enclosed by dnwell
r_538_poly.X.1a
0 0 2 Apr 23 16:42:00 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.X.1a: 0.5 min. width of dummy_nhv
r_539_poly.X.1a
0 0 2 Apr 23 16:42:00 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.X.1a: 0.15 min. width of dummy_nlowvt
r_540_poly.X.1a
0 0 2 Apr 23 16:42:01 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.X.1a: 0.15 min. width of dummy_nshort
r_541_poly.X.1a
0 0 2 Apr 23 16:42:01 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.X.1a: 0.15 min. width of dummy_pshort
r_542_poly.X.1a
0 0 2 Apr 23 16:42:01 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.X.1a: 0.35 min. width of dummy_plowvt
r_543_POLY.X.1
0 0 2 Apr 23 16:42:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
POLY.X.1: This is an invalid nfet
r_544_POLY.X.1
0 0 2 Apr 23 16:42:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
POLY.X.1: This is an invalid pfet
r_545_POLY.X.1
0 0 2 Apr 23 16:42:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
POLY.X.1: This nhvnative is only allow in the FGR
r_546_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pmedlvt_W0p84_L0p15_2F device has an invalid W/L. Please see MRGA
r_547_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_548_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p15_2F device has an invalid W/L. Please see MRGA
r_549_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p65_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_551_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_552_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_553_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_555_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W0p84_L0p15_2F device has an invalid W/L. Please see MRGA
r_556_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p65_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_558_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_559_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_560_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_561_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p15_2F device has an invalid W/L. Please see MRGA
r_562_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_563_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p68_L0p15_4F device has an invalid W/L. Please see MRGA
r_564_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_565_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W5p0_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_566_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_567_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p65_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_569_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This ppu device has an invalid W/L. Please see MRGA
r_570_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p68_L0p15_2F device has an invalid W/L. Please see MRGA
r_571_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p65_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_572_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pmedlvt_W1p68_L0p15_4F device has an invalid W/L. Please see MRGA
r_573_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p65_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_574_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W1p65_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_576_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pshort_W3p0_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_577_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_pmedlvt_W1p68_L0p15_2F device has an invalid W/L. Please see MRGA
r_578_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W0p42_L0p15_2F device has an invalid W/L. Please see MRGA
r_579_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W0p84_L0p15_2F device has an invalid W/L. Please see MRGA
r_580_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W7p0_L0p5_M10_b device has an invalid W/L. Please see MRGA
r_582_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W5p0_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_583_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This npass device has an invalid W/L. Please see MRGA
r_584_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W1p65_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_585_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W3p0_L0p5_M10_b device has an invalid W/L. Please see MRGA
r_586_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This sonos_p device has an invalid W/L. Please see MRGA
r_587_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This nhvnativeesd device has an invalid W/L. Please see MRGA
r_588_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This npd device has an invalid W/L. Please see MRGA
r_589_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This ntvnative device has an invalid W/L. Please see MRGA
r_590_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W5p0_L0p5_M4_b device has an invalid W/L. Please see MRGA
r_591_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W1p65_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_592_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p15_4F device has an invalid W/L. Please see MRGA
r_593_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This fnpass device has an invalid W/L. Please see MRGA
r_594_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W1p65_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_595_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_596_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p15_8F device has an invalid W/L. Please see MRGA
r_597_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_598_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_599_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_600_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W5p0_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_601_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W0p84_L0p15_4F device has an invalid W/L. Please see MRGA
r_602_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W3p0_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_603_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W5p0_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_604_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W5p0_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_606_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W3p0_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_607_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This sonos_e device has an invalid W/L. Please see MRGA
r_608_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W5p0_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_609_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W3p0_L0p5_M4_b device has an invalid W/L. Please see MRGA
r_610_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_611_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W1p65_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_612_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W3p0_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_614_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W5p0_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_615_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W5p0_L0p5_M2_b device has an invalid W/L. Please see MRGA
r_616_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W0p84_L0p15_8F device has an invalid W/L. Please see MRGA
r_617_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W1p65_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_618_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_619_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W5p0_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_620_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This nshortesd device has an invalid W/L. Please see MRGA
r_621_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W5p0_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_622_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W3p0_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_624_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W5p0_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_625_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W1p65_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_626_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W5p0_L0p5_M10_b device has an invalid W/L. Please see MRGA
r_627_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W3p0_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_628_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W3p0_L0p5_M2_b device has an invalid W/L. Please see MRGA
r_629_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W1p65_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_630_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This nlvtpass device has an invalid W/L. Please see MRGA
r_631_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W1p65_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_632_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W5p0_L0p15_M4_b device has an invalid W/L. Please see MRGA
r_633_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W1p65_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_634_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W5p0_L0p18_M4_b device has an invalid W/L. Please see MRGA
r_635_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W3p0_L0p15_2F device has an invalid W/L. Please see MRGA
r_636_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W3p0_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_637_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W5p0_L0p18_M2_b device has an invalid W/L. Please see MRGA
r_638_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nhv_W7p0_L0p5_M4_b device has an invalid W/L. Please see MRGA
r_639_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This nhvesd device has an invalid W/L. Please see MRGA
r_640_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W1p65_L0p25_M2_b device has an invalid W/L. Please see MRGA
r_641_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nlowvt_W1p65_L0p25_M4_b device has an invalid W/L. Please see MRGA
r_642_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This s8rf_nshort_W1p65_L0p15_M2_b device has an invalid W/L. Please see MRGA
r_643_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This pvhv device has an invalid W/L. Please see MRGA
r_644_Poly.X.1
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
Poly.X.1: This nvhv device has an invalid W/L. Please see MRGA
r_645_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W0p42_L0p15_2F_cell should be rectangular
r_646_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.42 min. width of s8rf_nlowvt_W0p42_L0p15_2F_cell
r_647_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.42 max. width of s8rf_nlowvt_W0p42_L0p15_2F_cell
r_648_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.14 min. length of s8rf_nlowvt_W0p42_L0p15_2F_cell
r_649_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.14 max. length of s8rf_nlowvt_W0p42_L0p15_2F_cell
r_650_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W0p84_L0p15_2F_cell should be rectangular
r_651_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 min. width of s8rf_nlowvt_W0p84_L0p15_2F_cell
r_652_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 max. width of s8rf_nlowvt_W0p84_L0p15_2F_cell
r_653_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.14 min. length of s8rf_nlowvt_W0p84_L0p15_2F_cell
r_654_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.14 max. length of s8rf_nlowvt_W0p84_L0p15_2F_cell
r_655_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W0p84_L0p15_4F_cell should be rectangular
r_656_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 min. width of s8rf_nlowvt_W0p84_L0p15_4F_cell
r_657_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 max. width of s8rf_nlowvt_W0p84_L0p15_4F_cell
r_658_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 2 min. length of s8rf_nlowvt_W0p84_L0p15_4F_cell
r_659_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 2 max. length of s8rf_nlowvt_W0p84_L0p15_4F_cell
r_660_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W0p84_L0p15_8F_cell should be rectangular
r_661_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 min. width of s8rf_nlowvt_W0p84_L0p15_8F_cell
r_662_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 max. width of s8rf_nlowvt_W0p84_L0p15_8F_cell
r_663_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3.72 min. length of s8rf_nlowvt_W0p84_L0p15_8F_cell
r_664_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3.72 max. length of s8rf_nlowvt_W0p84_L0p15_8F_cell
r_665_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W3p0_L0p15_2F_cell should be rectangular
r_666_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.14 min. width of s8rf_nlowvt_W3p0_L0p15_2F_cell
r_667_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.14 max. width of s8rf_nlowvt_W3p0_L0p15_2F_cell
r_668_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 min. length of s8rf_nlowvt_W3p0_L0p15_2F_cell
r_669_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 max. length of s8rf_nlowvt_W3p0_L0p15_2F_cell
r_670_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W3p0_L0p15_4F_cell should be rectangular
r_671_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 2 min. width of s8rf_nlowvt_W3p0_L0p15_4F_cell
r_672_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 2 max. width of s8rf_nlowvt_W3p0_L0p15_4F_cell
r_673_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 min. length of s8rf_nlowvt_W3p0_L0p15_4F_cell
r_674_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 max. length of s8rf_nlowvt_W3p0_L0p15_4F_cell
r_675_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_nlowvt_W3p0_L0p15_8F_cell should be rectangular
r_676_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 min. width of s8rf_nlowvt_W3p0_L0p15_8F_cell
r_677_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 max. width of s8rf_nlowvt_W3p0_L0p15_8F_cell
r_678_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3.72 min. length of s8rf_nlowvt_W3p0_L0p15_8F_cell
r_679_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3.72 max. length of s8rf_nlowvt_W3p0_L0p15_8F_cell
r_680_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_pshort_W0p84_L0p15_2F_cell should be rectangular
r_681_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 min. width of s8rf_pshort_W0p84_L0p15_2F_cell
r_682_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 0.84 max. width of s8rf_pshort_W0p84_L0p15_2F_cell
r_683_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 min. length of s8rf_pshort_W0p84_L0p15_2F_cell
r_684_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 max. length of s8rf_pshort_W0p84_L0p15_2F_cell
r_685_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_pshort_W1p68_L0p15_2F_cell should be rectangular
r_686_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 min. width of s8rf_pshort_W1p68_L0p15_2F_cell
r_687_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 max. width of s8rf_pshort_W1p68_L0p15_2F_cell
r_688_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.68 min. length of s8rf_pshort_W1p68_L0p15_2F_cell
r_689_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.68 max. length of s8rf_pshort_W1p68_L0p15_2F_cell
r_690_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_pshort_W1p68_L0p15_4F_cell should be rectangular
r_691_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.68 min. width of s8rf_pshort_W1p68_L0p15_4F_cell
r_692_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.68 max. width of s8rf_pshort_W1p68_L0p15_4F_cell
r_693_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.97 min. length of s8rf_pshort_W1p68_L0p15_4F_cell
r_694_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.97 max. length of s8rf_pshort_W1p68_L0p15_4F_cell
r_695_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_pshort_W3p0_L0p15_2F_cell should be rectangular
r_696_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 min. width of s8rf_pshort_W3p0_L0p15_2F_cell
r_697_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 max. width of s8rf_pshort_W3p0_L0p15_2F_cell
r_698_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 min. length of s8rf_pshort_W3p0_L0p15_2F_cell
r_699_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 3 max. length of s8rf_pshort_W3p0_L0p15_2F_cell
r_700_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: s8rf_pshort_W5p0_L0p15_2F_cell should be rectangular
r_701_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 min. width of s8rf_pshort_W5p0_L0p15_2F_cell
r_702_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 1.11 max. width of s8rf_pshort_W5p0_L0p15_2F_cell
r_703_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 5 min. length of s8rf_pshort_W5p0_L0p15_2F_cell
r_704_diff.13
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
diff.13: 5 max. length of s8rf_pshort_W5p0_L0p15_2F_cell
r_705_poly.16
0 0 2 Apr 23 16:42:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
poly.16: Poly of the RF FETs defined in Table H5 cannot overlap
r_706_npc.1
0 0 2 Apr 23 16:42:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npc.1: 0.27 min. width of npc
r_707_npc.2
0 0 2 Apr 23 16:42:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npc.2: 0.27 min. spacing/notch of npc
r_708_npc.4
0 0 2 Apr 23 16:42:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npc.4: 0.09 min. spacing of npc & gate
r_709_npc.4
0 0 2 Apr 23 16:42:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npc.4: npc must not overlap gate
r_710_npc.5
0 0 2 Apr 23 16:42:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npc.5: 0.095 max enclosure of poly overlapping slotted_licon by npcm
r_711_licon.2
0 0 2 Apr 23 16:42:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.2: 0.17 min. spacing/notch of "licon1" in periphery
r_712_licon.2
0 0 2 Apr 23 16:42:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.2: 0.17 min. spacing of licon1 across COREID boundary
r_713_licon.3
0 0 2 Apr 23 16:42:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.3: 0.17 min. width of ring licon1
r_714_licon.3
0 0 2 Apr 23 16:42:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.3: 0.175 max. width of ring licon1
r_715_licon.3
0 0 2 Apr 23 16:42:15 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.3: ring licon1 must be enclosed by SEALID
r_716_licon.4
0 0 2 Apr 23 16:42:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.4: licon1 must overlap li1 and (poly or diff or tap)
r_717_licon.5a
0 0 2 Apr 23 16:42:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.5a: 0.04 min. enclosure of "licon1" in periphery by diff
r_718_licon.5b
0 0 2 Apr 23 16:42:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.5b: 0.06 min. spacing of tapLicon_PERI & diffTap butting edge
r_719_licon.5c
0 0 2 Apr 23 16:42:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.5c: 0.06 min. enclosure of adj. sides of "licon1" in periphery by diff
r_720_licon.6
0 0 2 Apr 23 16:42:21 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.6: "licon1" in periphery must not straddle tap
r_721_licon.7
0 0 2 Apr 23 16:42:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.7: 0.12 min. enclosure of adj. sides of "licon1" in periphery by noButtTap
r_722_licon.8
0 0 2 Apr 23 16:42:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.8: 0.05 min. enclosure of "poly_licon1" in periphery by poly
r_723_licon.8a
0 0 2 Apr 23 16:42:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.8a: 0.08 min. enclosure of adj. sides of "poly_licon1" in periphery by poly
r_724_licon.10
0 0 2 Apr 23 16:42:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.10: 0.25 min. spacing of varLiconPer & varChannel
r_725_licon.11
0 0 2 Apr 23 16:42:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11: 0.055 min. spacing of "licon1 on diffTap" in periphery & gateNoSC
r_726_licon.11
0 0 2 Apr 23 16:42:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11: "licon1 on diffTap" in periphery must not overlap gateNoSC
r_727_licon.11a
0 0 2 Apr 23 16:42:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11a: 0.05 min. spacing of "licon1 on diffTap" in periphery & (gate and areaid.sc) except 0.15 phighvt
r_728_licon.11a
0 0 2 Apr 23 16:42:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11a: "licon1 on diffTap" in periphery must not overlap (gate and areaid.sc) except 0.15 phighvt
r_729_licon.11b
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11b: 0.05 min. spacing of "licon1 on diffTap" in periphery & gateSCPhighvt
r_730_licon.11b
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11b: "licon1 on diffTap" in periphery must not overlap gateSCPhighvt
r_731_licon.11c
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11c: 0.04 min. spacing of "licon1 on diffTap" in periphery & licon11cGate
r_732_licon.11c
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11c: "licon1 on diffTap" in periphery must not overlap licon11cGate
r_733_licon.11d
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11d: 0.045 min. spacing of "licon1 on diffTap" in periphery & licon11dGate
r_734_licon.11d
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.11d: "licon1 on diffTap" in periphery must not overlap licon11dGate
r_735_licon.1
0 0 2 Apr 23 16:42:29 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1: rectLCON1OutRpm should be rectangular
r_736_licon.1
0 0 2 Apr 23 16:42:30 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1: 0.17 min. width of rectLCON1OutRpm
r_737_licon.1
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1: 0.17 max. length of rectLCON1OutRpm
r_738_licon.1b/c
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1b/c: rectLCON1AndRpm should be rectangular
r_739_licon.1b/c
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1b/c: 0.19 min. width of rectLCON1AndRpm
r_740_licon.1b/c
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1b/c: 0.19 max. width of rectLCON1AndRpm
r_741_licon.1b/c
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1b/c: 2 min. length of rectLCON1AndRpm
r_742_licon.1b/c
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.1b/c: 2 max. length of rectLCON1AndRpm
r_743_licon.2b
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.2b: 0.35 min. spacing/notch of rectLCON1AndRpm
r_744_licon.2c
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.2c: min spacing between slotted licon in lateral dir is 0.510
r_745_licon.2d
0 0 2 Apr 23 16:42:31 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.2d: 0.51 min. spacing of rectLCON1AndRpm & rectLCON1OutRpm
r_746_licon.9
0 0 2 Apr 23 16:42:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.9: 0.11 min. spacing of polyLicon1OutRpm & psdm
r_747_licon.9
0 0 2 Apr 23 16:42:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.9: polyLicon1OutRpm must not overlap psdm
r_748_licon.13
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.13: 0.09 min. spacing of "licon1 on diffTap" in periphery & npc
r_749_licon.13
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.13: "licon1 on diffTap" in periphery must not overlap npc
r_750_licon.14
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.14: 0.19 min. spacing of poly_licon1 & "diffTap" in periphery
r_751_licon.15
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.15: 0.1 min. enclosure of "poly_licon1" in periphery by npc
r_752_licon.15
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.15: "poly_licon1" in periphery must be enclosed by npc
r_753_npcon.c6
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npcon.c6: 0.045 min. enclosure of "poly_licon1" in core by npc
r_754_npcon.c6
0 0 2 Apr 23 16:42:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
npcon.c6: "poly_licon1" in core must be enclosed by npc
r_755_licon.16
0 0 2 Apr 23 16:42:34 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.16: source must enclose at least one licon in peri
r_756_licon.16
0 0 2 Apr 23 16:42:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.16: tap must enclose at least one licon in peri
r_757_licon.17
0 0 2 Apr 23 16:42:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.17: licon1 overlapping poly must not overlap diffTap
r_758_licon.18
0 0 2 Apr 23 16:42:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.18: npc must enclose poly_licon
r_759_licon.19
0 0 2 Apr 23 16:42:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.19: poly on HV varactor must not interact with licon
r_760_licon.c1
0 0 2 Apr 23 16:42:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.c1: 0.13 min. spacing of poly_licon1 & "diffTap" in core
r_761_licon.c3
0 0 2 Apr 23 16:42:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.c3: 0.165 min. spacing/notch of "licon1" in core
r_762_licon.c4
0 0 2 Apr 23 16:42:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
licon.c4: "poly_licon1" in core must not overlap psdm
r_763_li.1
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.1: 0.17 min. width of liNoVppCaps across areaid:ce
r_764_li.1
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.1: 0.17 min. width of liNoVppCaps in PERI
r_765_li.c1
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.c1: 0.14 min. width of liNoVppCaps in COREID
r_766_li.1a
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.1a: 0.14 min. width of liVppCaps
r_767_li.3
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.3: 0.17 min. spacing/notch of li1_3_PERI
r_768_li.3
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.3: 0.17 min. spacing of li1 across COREID boundary
r_769_li.3a
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.3a: 0.14 min. spacing/notch of li1_3a_PERI
r_770_li.4
0 0 2 Apr 23 16:43:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.4: "licon1" in periphery must be enclosed by li1
r_771_li.5
0 0 2 Apr 23 16:43:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.5: 0.08 min. enclosure of adj. sides of "licon1" in periphery by li1
r_772_li.6
0 0 2 Apr 23 16:43:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.6: 0.0561 min. area of li1 across areaid:ce
r_773_li.6
0 0 2 Apr 23 16:43:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.6: 0.0561 min. area of li1 
r_774_li.7
0 0 2 Apr 23 16:43:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.7: 0.29 min. width of li1AndResNoESD
r_775_li.c1
0 0 2 Apr 23 16:43:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.c1: 0.14 min. width of "li1" in core
r_776_li.c2
0 0 2 Apr 23 16:43:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
li.c2: 0.14 min. spacing/notch of "li1" in core
r_777_ct.1
0 0 2 Apr 23 16:43:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.1: non-ring mcon should be rectangular
r_778_ct.1
0 0 2 Apr 23 16:43:50 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.1: 0.17 min. width of non-ring mcon
r_779_ct.1
0 0 2 Apr 23 16:44:01 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.1: 0.17 max. length of non-ring mcon
r_780_ct.2
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.2: 0.19 min. spacing/notch of mcon
r_781_ct.3
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.3: 0.17 min. width of ring-shaped mcon
r_782_ct.3
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.3: 0.175 max. width of ring-shaped mcon
r_783_ct.3
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.3: ring-shaped mcon must be enclosed by SEALID
r_784_ct.4
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.4: "mcon" in periphery must be enclosed by li1
r_785_ct.c1
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.c1: "mcon" in core must overlap li1
r_786_ct.c2
0 0 2 Apr 23 16:44:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ct.c2: 0.19 min. spacing/notch of "mcon" in core
r_787_m1.1
0 0 2 Apr 23 16:44:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.1: 0.14 min. width of met1
r_788_m1.2
0 0 2 Apr 23 16:44:16 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.2: 0.14 min. spacing/notch of met1
r_789_m1.3b
0 0 2 Apr 23 16:44:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.3b: 0.28 min. spacing between huge met1 and normal met1  
r_790_m1.3a
0 0 2 Apr 23 16:44:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.3a: 0.28 min. spacing/notch of huge met1+nearby met1  
r_791_m1.4
0 0 2 Apr 23 16:44:30 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.4: 0.03 min. enclosure of mcon_PERI_4 by met1
r_792_m1.4
0 0 2 Apr 23 16:44:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.4: mcon_PERI_4 must be enclosed by met1
r_793_m1.4a
0 0 2 Apr 23 16:44:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.4a: 0.005 min. enclosure of mcon_PERI_4a by met1
r_794_m1.4a
0 0 2 Apr 23 16:44:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.4a: mcon_PERI_4a must be enclosed by met1
r_795_m1.5
0 0 2 Apr 23 16:44:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.5: 0.06 min. enclosure of adj. sides of "mcon" in periphery by met1
r_796_m1.6
0 0 2 Apr 23 16:44:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.6: 0.083 min. area of met1
r_797_m1.7
0 0 2 Apr 23 16:45:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.7: 0.14 min. area of met1Hole
r_798_m1.7
0 0 2 Apr 23 16:45:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.7: 0.14 min. area of met1HoleEmpty
r_799_m1.c1
0 0 2 Apr 23 16:45:05 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.c1: "mcon" in core must be enclosed by met1
r_800_via.1a
0 0 2 Apr 23 16:45:06 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.1a: via outside of moduleCut should be rectangular
r_801_via.1a
0 0 2 Apr 23 16:45:07 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.1a: 0.15 min. width of via outside of moduleCut
r_802_via.1a
0 0 2 Apr 23 16:45:08 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.1a: 0.15 max. length of via outside of moduleCut
r_803_via.1b
0 0 2 Apr 23 16:45:08 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.1b: via size inside module cut must be 0.150 or 0.230 or 0.280 
r_804_via.2
0 0 2 Apr 23 16:45:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.2: 0.17 min. spacing/notch of via
r_805_via.3
0 0 2 Apr 23 16:45:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.3: 0.2 min. width of ring-shaped via
r_806_via.3
0 0 2 Apr 23 16:45:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.3: 0.205 max. width of ring-shaped via
r_807_via.3
0 0 2 Apr 23 16:45:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.3: ring-shaped via must be enclosed by SEALID
r_808_via.4a
0 0 2 Apr 23 16:45:21 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.4a: 0.055 min. enclosure of 0.15um via by met1
r_809_via.4a
0 0 2 Apr 23 16:45:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.4a: 0.15um via must be enclosed by met1
r_810_via.4b
0 0 2 Apr 23 16:45:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.4b: 0.03 min. enclosure of 0.23 via within modulecut by met1
r_811_via.4b
0 0 2 Apr 23 16:45:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.4b: 0.23 via within modulecut must be enclosed by met1
r_812_via.4c
0 0 2 Apr 23 16:45:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.4c: 0 min. enclosure of 0.28 via within modulecut by met1
r_813_via.4c
0 0 2 Apr 23 16:45:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.4c: 0.28 via within modulecut must be enclosed by met1
r_814_via.5a
0 0 2 Apr 23 16:45:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.5a: 0.085 min. enclosure of adj. sides of 0.15um via by met1
r_815_via.5b
0 0 2 Apr 23 16:45:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.5b: 0.06 min. enclosure of adj. sides of 0.23 via within modulecut by met1
r_816_via.5c
0 0 2 Apr 23 16:45:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via.5c: 0 min. enclosure of adj. sides of 0.28 via within modulecut by met1
r_817_m2.1
0 0 2 Apr 23 16:46:04 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.1: 0.14 min. width of met2
r_818_m2.2
0 0 2 Apr 23 16:46:04 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.2: 0.14 min. spacing/notch of met2
r_819_m2.3b
0 0 2 Apr 23 16:46:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.3b: 0.28 min. spacing between huge met2 and normal met2  
r_820_m2.3a
0 0 2 Apr 23 16:46:09 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.3a: 0.28 min. spacing/notch of huge met2+nearby met2  
r_821_m2.4
0 0 2 Apr 23 16:46:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.4: 0.055 min. enclosure of "via" in periphery by met2
r_822_m2.4
0 0 2 Apr 23 16:46:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.4: "via" in periphery must be enclosed by met2
r_823_m2.5
0 0 2 Apr 23 16:46:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.5: 0.085 min. enclosure of adj. sides of via by met2
r_824_m2.6
0 0 2 Apr 23 16:46:23 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.6: 0.0676 min. area of met2
r_825_m2.7
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.7: 0.14 min. area of met2Hole
r_826_m2.7
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.7: 0.14 min. area of met2HoleEmpty
r_827_m2.c4
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.c4: 0.04 min. enclosure of "via" in core by met2
r_828_m2.c4
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.c4: "via" in core must be enclosed by met2
r_829_varac.1
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.1: Min channel length of varactor channel is 0.180
r_830_varac.2
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.2: Min channel width of varactor channel is 1.000
r_831_varac.3
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.3: 0.18 min. spacing of varChannel & hvtp
r_832_varac.4
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.4: 0.25 min. spacing of varChannel & liconOnTap
r_833_varac.5
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.5: 0.15 min. enclosure of polyonVarChannel by nwell
r_834_varac.6
0 0 2 Apr 23 16:46:26 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.6: 0.27 min. spacing of taponVarChannel & difftapNotVarChannel
r_835_varac.7
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.7: nwell overlapping varacChannel must not overlap p+ diff
r_836_varac.8
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
varac.8: 0.255 min. enclosure of varChannel by hvtp
r_837_photo.2
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.2: 3.000 min/max width of photoDiode
r_838_photo.3
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.3: 5 min. spacing/notch of photoDiode
r_839_photo.4
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.4: 5.3 min. spacing of photoDiode & dnwellNotPhoto
r_840_photo.5
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.5: edges of photoDiode (dnwell overlapping areaid.po) must be coincident with areaid.po
r_841_photo.6
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.6: photoDiode must be enclosed by dnwell ring
r_842_photo.7
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.7: photoDiode must be enclosed by p+tap ring
r_843_photo.8
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.8: 0.840 min/max width of nwell inside photoDiode
r_844_photo.9
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.9: 1.080 min/max enclosure of nwell inside photoDiode by photoDiode
r_845_photo.10
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.10: 0.410 min/max width of tap inside photoDiode
r_846_photo.11
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
photo.11: 0.215 min/max enclosure of tap by nwell inside photoDiode
r_847_via2.1d
0 0 2 Apr 23 16:46:27 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.1d: via size inside module cut must be 0.200, 0.280, 1.200, OR 1.500
r_848_via2.1a
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.1a: rectVIA2noMT should be rectangular
r_849_via2.1a
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.1a: 0.2 min. width of rectVIA2noMT
r_850_via2.1a
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.1a: 0.2 max. length of rectVIA2noMT
r_851_via2.2
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.2: 0.2 min. spacing/notch of via2
r_852_via2.3
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.3: 0.2 min. width of ring-shaped via2
r_853_via2.3
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.3: 0.205 max. width of ring-shaped via2
r_854_via2.3
0 0 2 Apr 23 16:46:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.3: ring-shaped via2 must be enclosed by SEALID
r_855_via2.4
0 0 2 Apr 23 16:46:30 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.4: 0.04 min. enclosure of via2 by met2
r_856_via2.4
0 0 2 Apr 23 16:46:30 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.4: via2 must be enclosed by met2
r_857_via2.4a
0 0 2 Apr 23 16:46:30 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.4a: 0.14 min. enclosure of rectVIA2Big by met2
r_858_via2.4a
0 0 2 Apr 23 16:46:30 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.4a: rectVIA2Big must be enclosed by met2
r_859_via2.5
0 0 2 Apr 23 16:46:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via2.5: 0.085 min. enclosure of adj. sides of via2 by met2
r_860_m3.1
0 0 2 Apr 23 16:46:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.1: 0.3 min. width of met3
r_861_m3.2
0 0 2 Apr 23 16:46:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.2: 0.3 min. spacing/notch of met3
r_862_m3.4
0 0 2 Apr 23 16:46:34 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.4: 0.065 min. enclosure of via2 by met3
r_863_m3.4
0 0 2 Apr 23 16:46:34 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.4: via2 must be enclosed by met3
r_864_m3.6
0 0 2 Apr 23 16:46:34 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.6: 0.24 min. area of met3
r_865_m3.3d
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.3d: 0.4 min. spacing between huge met3 and normal met3  
r_866_m3.3c
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.3c: 0.4 min. spacing/notch of huge met3+nearby met3  
r_867_via3.1
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.1: rectVIA3noMT should be rectangular
r_868_via3.1
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.1: 0.2 min. width of rectVIA3noMT
r_869_via3.1
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.1: 0.2 max. length of rectVIA3noMT
r_870_via3.1a
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.1a: via size inside module cut must be 0.200 OR 0.800
r_871_via3.2
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.2: 0.2 min. spacing/notch of via3
r_872_via3.3
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.3: 0.2 min. width of ring-shaped via3
r_873_via3.3
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.3: 0.205 max. width of ring-shaped via3
r_874_via3.3
0 0 2 Apr 23 16:46:35 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.3: ring-shaped via3 must be enclosed by SEALID
r_875_via3.4
0 0 2 Apr 23 16:46:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.4: 0.06 min. enclosure of non-ring via3 by met3
r_876_via3.4
0 0 2 Apr 23 16:46:36 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.4: non-ring via3 must be enclosed by met3
r_877_via3.5
0 0 2 Apr 23 16:46:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via3.5: 0.09 min. enclosure of adj. sides of via3 by met3
r_878_m4.1
0 0 2 Apr 23 16:46:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.1: 0.3 min. width of met4
r_879_m4.2
0 0 2 Apr 23 16:46:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.2: 0.3 min. spacing/notch of met4
r_880_m4.3
0 0 2 Apr 23 16:46:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.3: 0.065 min. enclosure of via3 by met4
r_881_m4.3
0 0 2 Apr 23 16:46:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.3: via3 must be enclosed by met4
r_882_m4.4a
0 0 2 Apr 23 16:46:37 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.4a: 0.24 min. area of met4
r_883_m4.5b
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.5b: 0.4 min. spacing between huge met4 and normal met4  
r_884_m4.5a
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.5a: 0.4 min. spacing/notch of huge met4+nearby met4  
r_885_via4.1
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.1: non-ring via4 should be rectangular
r_886_via4.1
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.1: 0.8 min. width of non-ring via4
r_887_via4.1
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.1: 0.8 max. length of non-ring via4
r_888_via4.2
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.2: 0.8 min. spacing/notch of via4
r_889_via4.3
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.3: 0.8 min. width of ring-shaped via4
r_890_via4.3
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.3: 0.805 max. width of ring-shaped via4
r_891_via4.3
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.3: ring-shaped via4 must be enclosed by SEALID
r_892_via4.4
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.4: 0.19 min. enclosure of non-ring via4 by met4
r_893_via4.4
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
via4.4: non-ring via4 must be enclosed by met4
r_894_m5.1
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m5.1: 1.6 min. width of met5
r_895_m5.2
0 0 2 Apr 23 16:46:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m5.2: 1.6 min. spacing/notch of met5
r_896_m5.3
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m5.3: 0.31 min. enclosure of via4 by met5
r_897_m5.3
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m5.3: via4 must be enclosed by met5
r_898_m5.4
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m5.4: 4 min. area of met5
r_899_pad.2
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.2: 1.27 min. spacing/notch of pad
r_900_pad.3
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.3: hugepad with area less than 30000.0 not allowed
r_901_denmos.1
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.1: 1.055 min. width of gate of Drain Extended nFET
r_902_denmos.2
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.2: 0.28 min. width of deNFetSource not overlapping poly
r_903_denmos.3
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.3: 0.925 min. width of deNFetSource overlapping poly
r_904_denmos.4
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.4: 0.17 min. width of drain  of Drain Extended nFET
r_905_denmos.5
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.5: min/max extension between de_nFET_source over nwell 0.225 
r_906_denmos.6
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.6: min/max spacing  between de_nFET_source and de_nFET_drain 1.585 
r_907_denmos.7
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.7: min channel width 5.000 
r_908_denmos.8
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.8: 90 degree angles are not permitted for nwell over poly
r_909_denmos.10
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.10: 0.66 min. enclosure of drain  of Drain Extended nFET by nwell
r_910_denmos.11
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.11: 0.86 min. spacing of ptap & nwellOVRdeNFetDrain
r_911_denmos.12
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.12: 2.4 min. spacing of nwellOVRdeNFetDrain
r_912_denmos.13
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.13: 0.13 min. enclosure of source of Drain Extended nFET by nsdm
r_913_denmos.13
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
denmos.13: source of Drain Extended nFET must be enclosed by nsdm
r_915_depmos.1
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.1: 1.05 min. width of gate of Drain Extended pFET
r_916_depmos.2
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.2: 0.28 min. width of dePFetSourceNotpoly
r_917_depmos.3
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.3: 0.92 min. width of dePFetSource  overlapping poly
r_918_depmos.4
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.4: 0.17 min. width of drain of Drain Extended pFET
r_919_depmos.5
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.5: min/max extension between de_pFET_source beyond nwell 0.260 
r_920_depmos.6
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.6: min/max spacing  between de_pFET_source and de_pFET_drain 1.190 
r_921_depmos.7
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.7: min channel width 5.000 
r_922_depmos.8
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.8: 90 degree angles are not permitted for nwellhole over poly
r_923_depmos.10
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.10: 0.86 min. enclosure of drain of Drain Extended pFET by nwellhole
r_924_depmos.11
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.11: 0.66 min. spacing of ntap & dePFetDrainNwellhole
r_925_depmos.12
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.12: 0.13 min. enclosure of source of Drain Extended pFET by psdm
r_926_depmos.12
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.12: source of Drain Extended pFET must be enclosed by psdm
r_927_depmos.13
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
depmos.13: pvhv_depmos13 must be enclosed by moduleCutAREA
r_928_extd.1
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
extd.1: difftap must not straddle ENID
r_929_extd.2
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
extd.2:  diff tap must have two or three coincident edges with areaid.en if enclosed by areaid.en
r_930_extd.3
0 0 2 Apr 23 16:46:39 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
extd.3: deFetPoly must overlap polyGap
r_928_uhvi.1
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
uhvi.1: difftap must not straddle uhvi
r_929_uhvi.2
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
uhvi.2: poly must not straddle uhvi
r_931_uhvi.3
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
uhvi.3: pwbmNotLOWVTID must be enclosed by uhvi
r_928_uhvi.4
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
uhvi.4: dnwell must not straddle uhvi
r_928_uhvi.5
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
uhvi.5: UHVI must enclose areaid.ext
r_928_uhvi.6
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
uhvi.6: UHVI must enclose dnwell
r_928_pwbm.1
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwbm.1: 0.84 min. width of pwbm
r_929_pwbm.2
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwbm.2: 1.27 min. spacing/notch of pwbm inside uhvi
r_923_pwbm.3
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwbm.3: 0 min. enclosure of dnwell and uhvi by pwbm hole
r_923_pwbm.4
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwbm.4: dnwell_uhvi must be enclosed by pwbm_and_holes
r_924_pwbm.5
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwbm.5: 0.84 min. spacing of pwbm_holes
r_928_pwde.1
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwde.1: 0.84 min. width of pwde
r_929_pwde.2
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwde.2: 1.27 min. spacing of pwde_uhvi
r_923_pwde.3
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwde.3: 0 min. enclosure of pwde_uhvi and pwbm_uhvi
r_923_pwde.4
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwde.4: pwde must be enclosed by uhvi
r_923_pwde.5
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwde.5: pwde_uhvi must be enclosed by dnwell
r_923_pwde.6
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwde.6: 1.00 min. enclosure of pwde_uhvi by dnwell_uhvi
r_923_dnwell.3a
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.3a: dnwell in UHVI on same net cannot be less than 2.5 
r_923_dnwell.3d
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.3d: dnwell in UHVI on different nets cannot be less than 12.0 
r_924_dnwell.3b
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.3b: 12.0 min. spacing of dnwell_uhvi and dnwell_outside_uhvi
r_924_dnwell.3c
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
dnwell.3c: 9.5 min. spacing of dnwell_uhvi and nwell_outside_uhvi
r_923_nwell.5a
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.5a: 0 min. enclosure of nwell_uhvi by dnwell_uhvi
r_923_nwell.5b
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nwell.5b: nwell outside of UHVI cannot be on the same net with nwell inside UHVI
r_924_difftap.26
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
difftap.26: 0.5 min. spacing of pwbm and diffTap_nonUHVI
r_396_ultv.3
0 0 2 Apr 23 16:46:41 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ulvt.3: LOWVTID must not straddle uhvi
r_931_pwres.1
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.1: pwres must be enclosed by DnwNoRing
r_932_pwres.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.2: PwresDnw should be rectangular
r_933_pwres.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.2: 2.65 min. width of PwresDnw
r_934_pwres.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.2: 2.65 max. width of PwresDnw
r_935_pwres.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.2: 26.5 min. length of PwresDnw
r_936_pwres.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.2: 265 max. length of PwresDnw
r_937_pwres.5
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.5: pwres Tap to nwell spacing must be 0.220
r_938_pwres.6
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.6: 0.53 min. width of PwresTerm
r_939_pwres.6
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.6: Exceeds allowed width of pwell res tap
r_940_pwres.7a
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.7a: Tap in pwell must enclose 12 licon1 
r_941_pwres.7b
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.7b: Tap in pwell must enclose 12 mcon 
r_942_pwres.8a
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.8a: poly must not overlap PwresDnw
r_943_pwres.8b
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.8b: diff must not overlap PwresDnw
r_944_pwres.9
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.9: Nwell around pwell res must have strapped tap with metal
r_945_pwres.11
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.11: Pwell res must abut nwell edges on opposite sides
r_946_pwres.10
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pwres.10: Pwell res must abut 2 pwres_terminal on opposite sides
r_947_rfdiode.1
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rfdiode.1: non-manhattan RFDIODEID edge
r_948_rfdiode.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rfdiode.2: areaid.re must be coincident with nwell for the rf nwell diode
r_949_rfdiode.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rfdiode.3: areaid.re must be coincident with inner nwell ring edge for rf pwell-deep nwell diode
r_950_nsm.1
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.1: 3 min. width of nsm
r_951_nsm.2
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.2: 4 min. spacing/notch of nsm
r_952_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of diff_not_NSM3_exempt & nsm OR NSMmk
r_953_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: diff_not_NSM3_exempt must not overlap nsm OR NSMmk
r_954_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of tap_not_NSM3_exempt & nsm OR NSMmk
r_955_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: tap_not_NSM3_exempt must not overlap nsm OR NSMmk
r_956_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of fomDummyDRC_not_NSM3_exempt & nsm OR NSMmk
r_957_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: fomDummyDRC_not_NSM3_exempt must not overlap nsm OR NSMmk
r_958_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of FOMmk_not_NSM3_exempt & nsm OR NSMmk
r_959_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: FOMmk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_960_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of poly_not_NSM3_exempt & nsm OR NSMmk
r_961_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: poly_not_NSM3_exempt must not overlap nsm OR NSMmk
r_962_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of P1Mmk_not_NSM3_exempt & nsm OR NSMmk
r_963_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: P1Mmk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_964_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of li1_not_NSM3_exempt & nsm OR NSMmk
r_965_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: li1_not_NSM3_exempt must not overlap nsm OR NSMmk
r_966_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of LI1Mmk_not_NSM3_exempt & nsm OR NSMmk
r_967_nsm.3
0 0 2 Apr 23 16:46:42 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: LI1Mmk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_968_nsm.3
0 0 2 Apr 23 16:46:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of met1_not_NSM3_exempt & nsm OR NSMmk
r_969_nsm.3
0 0 2 Apr 23 16:46:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: met1_not_NSM3_exempt must not overlap nsm OR NSMmk
r_970_nsm.3
0 0 2 Apr 23 16:46:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of MM1mk_not_NSM3_exempt & nsm OR NSMmk
r_971_nsm.3
0 0 2 Apr 23 16:46:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: MM1mk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_972_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of met2_not_NSM3_exempt & nsm OR NSMmk
r_973_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: met2_not_NSM3_exempt must not overlap nsm OR NSMmk
r_974_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of MM2Mk_not_NSM3_exempt & nsm OR NSMmk
r_975_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: MM2Mk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_976_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of met3_not_NSM3_exempt & nsm OR NSMmk
r_977_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: met3_not_NSM3_exempt must not overlap nsm OR NSMmk
r_978_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of MM3mk_not_NSM3_exempt & nsm OR NSMmk
r_979_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: MM3mk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_980_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of met4_not_NSM3_exempt & nsm OR NSMmk
r_981_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: met4_not_NSM3_exempt must not overlap nsm OR NSMmk
r_982_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of MM4mk_not_NSM3_exempt & nsm OR NSMmk
r_983_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: MM4mk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_984_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of met5_not_NSM3_exempt & nsm OR NSMmk
r_985_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: met5_not_NSM3_exempt must not overlap nsm OR NSMmk
r_986_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: 1 min. spacing of MM5mk_not_NSM3_exempt & nsm OR NSMmk
r_987_nsm.3
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3: MM5mk_not_NSM3_exempt must not overlap nsm OR NSMmk
r_988_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of diff_not_NSM3a_exempt by frameBndr
r_989_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of tap_not_NSM3a_exempt by frameBndr
r_990_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of fomDummyDRC_not_NSM3a_exempt by frameBndr
r_991_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of FOMmk_not_NSM3a_exempt by frameBndr
r_992_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of poly_not_NSM3a_exempt by frameBndr
r_993_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of P1Mmk_not_NSM3a_exempt by frameBndr
r_994_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of li1_not_NSM3a_exempt by frameBndr
r_995_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of LI1Mmk_not_NSM3a_exempt by frameBndr
r_996_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of met1_not_NSM3a_exempt by frameBndr
r_997_nsm.3a
0 0 2 Apr 23 16:46:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of MM1mk_not_NSM3a_exempt by frameBndr
r_998_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of met2_not_NSM3a_exempt by frameBndr
r_999_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of MM2Mk_not_NSM3a_exempt by frameBndr
r_1000_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of met3_not_NSM3a_exempt by frameBndr
r_1001_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of MM3mk_not_NSM3a_exempt by frameBndr
r_1002_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of met4_not_NSM3a_exempt by frameBndr
r_1003_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of MM4mk_not_NSM3a_exempt by frameBndr
r_1004_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of met5_not_NSM3a_exempt by frameBndr
r_1005_nsm.3a
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3a: 3 min. enclosure of MM5mk_not_NSM3a_exempt by frameBndr
r_1006_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of diff_not_NSM3b_exempt & dieCut
r_1007_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of tap_not_NSM3b_exempt & dieCut
r_1008_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of fomDummyDRC_not_NSM3b_exempt & dieCut
r_1009_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of FOMmk_not_NSM3b_exempt & dieCut
r_1010_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of poly_not_NSM3b_exempt & dieCut
r_1011_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of P1Mmk_not_NSM3b_exempt & dieCut
r_1012_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of li1_not_NSM3b_exempt & dieCut
r_1013_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of LI1Mmk_not_NSM3b_exempt & dieCut
r_1014_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of met1_not_NSM3b_exempt & dieCut
r_1015_nsm.3b
0 0 2 Apr 23 16:46:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of MM1mk_not_NSM3b_exempt & dieCut
r_1016_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of met2_not_NSM3b_exempt & dieCut
r_1017_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of MM2Mk_not_NSM3b_exempt & dieCut
r_1018_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of met3_not_NSM3b_exempt & dieCut
r_1019_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of MM3mk_not_NSM3b_exempt & dieCut
r_1020_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of met4_not_NSM3b_exempt & dieCut
r_1021_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of MM4mk_not_NSM3b_exempt & dieCut
r_1022_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of met5_not_NSM3b_exempt & dieCut
r_1023_nsm.3b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
nsm.3b: 3 min. spacing of MM5mk_not_NSM3b_exempt & dieCut
r_1024_ncm.X.3
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.X.3: ncm_CORE not tech_CD must not overlap "ndiff" in periphery
r_1025_ncm.1
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.1: 0.38 min. width of ncmPeri
r_1026_ncm.2a
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.2a: 0.38 min. spacing/notch of ncmPeri
r_1027_ncm.7
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.7: 0.265 min. area of ncm
r_1028_ncm.8
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.8: 0.265 min. area of ncmHoles
r_1029_ncm.c8
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.c8: 0.235 min. enclosure of PDIFF by ncm_CORE not tech_CD
r_1030_ncm.c9
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.c9: 0.235 min. spacing of ncm_CORE not tech_CD & ndiff
r_1031_ncm.c9
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.c9: ncm_CORE not tech_CD must not overlap ndiff
r_1032_ncm.c10
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ncm.c10: 0.38 min. spacing of nwellOutCore & ncm_CORE not tech_CD
r_1033_ldntm.c1
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ldntm.c1: 0.7 min. width of ldntmCore
r_1034_ldntm.c2
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ldntm.c2: 0.7 min. spacing/notch of ldntmCore
r_1035_ldntm.c3
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ldntm.c3: enclosure of ndiff by ldntm must be more than  0.180 
r_1036_ldntm.c4
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ldntm.c4: 0.125 min. enclosure of nFet by ldntmCore
r_1037_ldntm.c5
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ldntm.c5: ldntm not allowed outside areaid.ce 
r_1038_ldntm.c6
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
ldntm.c6: 0.18 min. spacing of ldntmCoreExempt & pdiff
r_1039_rpm.1a
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.1a: 1.27 min. width of rpm
r_1039_urpm.1a
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
urpm.1a: 1.27 min. width of urpm
r_1046_rpm.2
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.2: 0.84 min. spacing/notch of rpm
r_1046_urpm.2
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
urpm.2: 0.84 min. spacing/notch of urpm
r_1047_rpm.3
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.3: 0.2 min. enclosure of precResistor by rpm
r_1047_urpm.3
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
urpm.3: 0.2 min. enclosure of precResistor by rpm
r_1048_rpm.3
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.3: precResistor must be enclosed by rpm
r_1049_rpm.4
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.4: 0.11 min. enclosure of precResistor by psdm
r_1050_rpm.4
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.4: precResistor must be enclosed by psdm
r_1051_rpm.5
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.5: 0.095 min. enclosure of precResistor by npc
r_1052_rpm.5
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.5: precResistor must be enclosed by npc
r_1053_rpm.6
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.6: 0.2 min. spacing of rpm & nsdm
r_1054_rpm.6
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.6: rpm must not overlap nsdm
r_1055_rpm.7
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.7: 0.2 min. spacing of rpm & poly
r_1056_rpm.8
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.8: poly must not straddle rpm
r_1057_rpm.9
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.9: 0.185 min. spacing of precResistor & hvntm
r_1058_rpm.9
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.9: precResistor must not overlap hvntm
r_1059_rpm.10
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.10: 2 min. spacing of rpmNotXmt & pwbm
r_1060_rpm.10
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rpm.10: rpmNotXmt must not overlap pwbm
r_1061_hvntm.X.1
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.X.1: hvntm must be drawn inside hvi
r_1062_hvntm.1
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.1: 0.7 min. width of hvntm_peri
r_1063_hvntm.2
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.2: 0.7 min. spacing/notch of hvntm_peri
r_1064_hvntm.3
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.3: 0.185 min. enclosure of ndiffInHviPeri by hvntm_peri
r_1065_hvntm.4
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.4: 0.185 min. spacing of hvntm_peri & ndiffOutsideHvi
r_1066_hvntm.4
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.4: hvntm_peri must not overlap ndiffOutsideHvi
r_1067_hvntm.5
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.5: 0.185 min. spacing of hvntm_peri & PDIFF_notENID
r_1068_hvntm.5
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.5: hvntm_peri must not overlap PDIFF_notENID
r_1069_hvntm.6a
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.6a: 0.185 min. spacing of hvntm_peri & PTAPnoButtDiff
r_1070_hvntm.6a
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.6a: hvntm_peri must not overlap ptap
r_1071_hvntm.6b
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.6b: hvntm_peri must not overlap diffpTapButtEdge_sz
r_1072_hvntm.7
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.7: 0 min. enclosure of ESD_nwell_tap_hvi by hvntm_peri
r_1073_hvntm.7
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.7: ESD_nwell_tap_hvi must be enclosed by hvntm_peri
r_1074_hvntm.9
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.9: hvntm must not overlap COREID
r_1075_hvntm.10
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hvntm.10: hvntm must overlap hvi
r_1076_cfom_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cfom_nikon: FOMmk in the nikon cross has the wrong polarity
r_1077_cfom_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cfom_nikon: FOMmk is missing from the nikon cross in the layout.
r_1078_cdnm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cdnm_nikon: DNMmk in the nikon cross has the wrong polarity
r_1079_cdnm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cdnm_nikon: DNMmk is missing from the nikon cross in the layout.
r_1080_cnwm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnwm_nikon: NWMmk in the nikon cross has the wrong polarity
r_1081_cnwm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnwm_nikon: NWMmk is missing from the nikon cross in the layout.
r_1082_chvtpm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvtpm_nikon: HVTPMmk in the nikon cross has the wrong polarity
r_1083_chvtpm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvtpm_nikon: HVTPMmk is missing from the nikon cross in the layout.
r_1084_clvtnm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clvtnm_nikon: LVTNMmk in the nikon cross has the wrong polarity
r_1085_clvtnm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clvtnm_nikon: LVTNMmk is missing from the nikon cross in the layout.
r_1086_clvom_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clvom_nikon: LVOMmk in the nikon cross has the wrong polarity
r_1087_clvom_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clvom_nikon: LVOMmk is missing from the nikon cross in the layout.
r_1088_cp1m_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cp1m_nikon: P1Mmk in the nikon cross has the wrong polarity
r_1089_cp1m_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cp1m_nikon: P1Mmk is missing from the nikon cross in the layout.
r_1090_cntm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm_nikon: NTMmk in the nikon cross has the wrong polarity
r_1091_cntm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm_nikon: NTMmk is missing from the nikon cross in the layout.
r_1092_chvntm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm_nikon: HVNTMmk in the nikon cross has the wrong polarity
r_1093_chvntm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm_nikon: HVNTMmk is missing from the nikon cross in the layout.
r_1094_cldntm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cldntm_nikon: LDNTMmk in the nikon cross has the wrong polarity
r_1095_cldntm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cldntm_nikon: LDNTMmk is missing from the nikon cross in the layout.
r_1096_cnpc_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnpc_nikon: NPCMmk in the nikon cross has the wrong polarity
r_1097_cnpc_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnpc_nikon: NPCMmk is missing from the nikon cross in the layout.
r_1098_cnsdm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnsdm_nikon: NSDMmk in the nikon cross has the wrong polarity
r_1099_cnsdm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnsdm_nikon: NSDMmk is missing from the nikon cross in the layout.
r_1100_cpsdm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cpsdm_nikon: PSDMmk in the nikon cross has the wrong polarity
r_1101_cpsdm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cpsdm_nikon: PSDMmk is missing from the nikon cross in the layout.
r_1102_clicm1_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clicm1_nikon: LICM1mk in the nikon cross has the wrong polarity
r_1103_clicm1_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clicm1_nikon: LICM1mk is missing from the nikon cross in the layout.
r_1104_cli1m_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cli1m_nikon: LI1Mmk in the nikon cross has the wrong polarity
r_1105_cli1m_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cli1m_nikon: LI1Mmk is missing from the nikon cross in the layout.
r_1106_cctm1_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cctm1_nikon: CTM1mk in the nikon cross has the wrong polarity
r_1107_cctm1_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cctm1_nikon: CTM1mk is missing from the nikon cross in the layout.
r_1108_cmm1_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm1_nikon: MM1mk in the nikon cross has the wrong polarity
r_1109_cmm1_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm1_nikon: MM1mk is missing from the nikon cross in the layout.
r_1110_cviam_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam_nikon: VIMmk in the nikon cross has the wrong polarity
r_1111_cviam_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam_nikon: VIMmk is missing from the nikon cross in the layout.
r_1112_cmm2_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm2_nikon: MM2mk in the nikon cross has the wrong polarity
r_1113_cmm2_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm2_nikon: MM2mk is missing from the nikon cross in the layout.
r_1114_cnsm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnsm_nikon: NSMmk in the nikon cross has the wrong polarity
r_1115_cnsm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cnsm_nikon: NSMmk is missing from the nikon cross in the layout.
r_1116_cpdm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cpdm_nikon: PDMmk in the nikon cross has the wrong polarity
r_1117_cpdm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cpdm_nikon: PDMmk is missing from the nikon cross in the layout.
r_1118_cviam2_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam2_nikon: VIM2mk in the nikon cross has the wrong polarity
r_1119_cviam2_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam2_nikon: VIM2mk is missing from the nikon cross in the layout.
r_1120_cmm3_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm3_nikon: MM3mk in the nikon cross has the wrong polarity
r_1121_cmm3_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm3_nikon: MM3mk is missing from the nikon cross in the layout.
r_1122_cviam3_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam3_nikon: VIM3mk in the nikon cross has the wrong polarity
r_1123_cviam3_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam3_nikon: VIM3mk is missing from the nikon cross in the layout.
r_1124_cmm4_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm4_nikon: MM4mk in the nikon cross has the wrong polarity
r_1125_cmm4_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm4_nikon: MM4mk is missing from the nikon cross in the layout.
r_1126_cviam4_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam4_nikon: VIM4mk in the nikon cross has the wrong polarity
r_1127_cviam4_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cviam4_nikon: VIM4mk is missing from the nikon cross in the layout.
r_1128_cmm5_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm5_nikon: MM5mk in the nikon cross has the wrong polarity
r_1129_cmm5_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cmm5_nikon: MM5mk is missing from the nikon cross in the layout.
r_1130_crpm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
crpm_nikon: RPMmk in the nikon cross has the wrong polarity
r_1131_crpm_nikon
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
crpm_nikon: RPMmk is missing from the nikon cross in the layout.
r_1132_areaid.1
0 0 2 Apr 23 16:46:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
areaid.1: Unapproved cells contain areaid.ce layer
r_1133_vpp.5
0 0 2 Apr 23 16:46:53 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5: 1.5 min spacing of (li1, poly, or met1/2) overlapping cap.dg to other li1
r_1134_vpp.5
0 0 2 Apr 23 16:46:53 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5: 1.5 min spacing of (li1, poly, or met1/2) overlapping cap.dg to other poly
r_1135_vpp.5
0 0 2 Apr 23 16:46:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5: 1.5 min spacing of (li1, poly, or met1/2) overlapping cap.dg to other met1
r_1136_vpp.5
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5: 1.5 min spacing of (li1, poly, or met1/2) overlapping cap.dg to other met2
r_1137_vpp.5a
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5a: 0.25 max PD ratio of met3.dg to capacitor.dg
r_1138_vpp.5b
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5b: 0.3 max PD ratio of met4.dg to capacitor.dg
r_1139_vpp.5c
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.5c: 0.4 max PD ratio of met5.dg to capacitor.dg
r_1140_vpp.10
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.10: capacitors are not allow to overlap
r_1141_vpp.11
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.11: 0.87 Minimum vpp_over_MOSCAP density over related gate
r_1142_vpp.12a
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.12a: capacitor in s8rf2_xcmvpp8p6x7p9_m3_lim5shield must overlap only 9.0 met4 2.01x2.01 polygons
r_1143_vpp.12b
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.12b: capacitor in s8rf2_xcmvpp11p5x11p7_m3_lim5shield must overlap only 16.0 met4 2.01x2.01 polygons
r_1144_vpp.12c
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.12c: capacitor in s8rf2_xcmvpp4p4x4p6_m3_lim5shield must overlap only 4.0 met4 1.5x1.5 polygons
r_1145_vpp.1
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.1: 1.43 min. width of capacitor
r_1146_vpp.1b
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.1b: 11.35 max. width of vpp_1b_err
r_1147_vpp.1c
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.1c: vppM3shieldA should be rectangular
r_1148_vpp.1c
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.1c: 3.88 min. width of vppM3shieldA
r_1149_vpp.1c
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.1c: 3.88 max. length of vppM3shieldA
r_1150_vpp.3
0 0 4 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.3: vpp3NotXmt must not overlap poly
vpp.3: vpp3NotXmt must not overlap diff
vpp.3: vpp3NotXmt must not overlap tap
r_1151_vpp.4
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.4: capacitor must not straddle nwell
r_1152_vpp.4
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.4: capacitor must not straddle dnwell
r_1153_vpp.8
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.8: 1.5 min. enclosure of capacitor by nwell
r_1154_vpp.9
0 0 2 Apr 23 16:46:59 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vpp.9: 1.5 min. spacing of capacitor & nwell
r_1155_vhvi.vhv.5
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.vhv.5: diffusion not in drain-extended devices must not be connected to VHVSrcDrn
r_1156_vhvi.1
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.1: 0.02 min. width of vhvi
r_1157_vhvi.2
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.2: vhvi must not overlap areaid.ce
r_1158_vhvi.3
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.3: VHVGate must overlap hvi
r_1159_vhvi.4
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.4: poly connected to same net as VHVsourcedrain must be tagged by vhvi
r_1160_vhvi.5
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.5: vhvi must not straddle VHVSrcDrn
r_1161_vhvi.6
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.6: vhvi overlapping VHVSrcDrn must not overlap poly
r_1162_vhvi.7
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.7: vhvi must not straddle VHVPoly
r_1163_vhvi.8
0 0 2 Apr 23 16:47:43 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
vhvi.8: 11.24 min. spacing of VHVnwell & VHVnwellNoConn
r_1164_hv.diff.1a
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.1a: Min space between hv_srcdrn and hv_srcdrn/diff for edges not butting tap is 0.3
r_1165_hv.diff.1b
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.1b: 0.3 min. spacing of diffResButtHV & diff
r_1166_hv.diff.1b
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.1b: 0.3 min. spacing of diffDiodeHV & diff
r_1167_hv.diff.2
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.2: 0.43 min. spacing of nwellConHVdiff & ndiff (not for source of drain extended device)
r_1168_hv.diff.3a
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.3a: 0.55 min. spacing of HVnSrcDrn & nwell
r_1169_hv.diff.3b
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.3b: 0.55 min. spacing of diffResButtHV & nwell
r_1170_hv.diff.3b
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.diff.3b: 0.55 min. spacing of diffDiodeHV & nwell
r_1171_hv.poly.1
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.1: hv poly can be drawn over only one diff
r_1172_hv.poly.1
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.1: hvPolyExmpt must not straddle nwell
r_1173_hv.poly.1
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.1: hvpoly cannot cross nwell boundary (except nwell hole edge
r_1174_hv.poly.2
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.2: 0.3 min. spacing of hvPolyExmpt & unrelDiff
r_1175_hv.poly.3
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.3: 0.55 min. spacing of hvPolyExmpt2 & nwell
r_1176_hv.poly.4
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.4: 0.3 min. enclosure of hvPolyExmpt2 by nwell
r_1177_hv.poly.6a
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.6a: 0.16 min extension of poly beyond hv gate is
r_1178_hv.poly.6b
0 0 2 Apr 23 16:48:28 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
hv.poly.6b: 0.16 min extension of hvpoly beyond gate 
r_1179_X.22
0 0 2 Apr 23 16:50:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating poly_float or poly_tie text not over poly
r_1180_X.22
0 0 2 Apr 23 16:50:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: poly marked with poly_float not floating
r_1181_X.22
0 0 2 Apr 23 16:50:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on poly is floating
r_1182_X.22
0 0 2 Apr 23 16:50:32 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on poly is texted as both tied and floating (IP Level)
r_1183_X.22
0 0 2 Apr 23 16:52:06 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating li1_float or li1_tie text not over li1
r_1184_X.22
0 0 2 Apr 23 16:52:06 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: li1 marked with li1_float not floating
r_1185_X.22
0 0 2 Apr 23 16:52:06 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on li1 is floating
r_1186_X.22
0 0 2 Apr 23 16:52:06 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on li1 is texted as both tied and floating (IP Level)
r_1187_X.22
0 0 2 Apr 23 16:58:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating m1_float or m1_tie text not over met1
r_1188_X.22
0 0 2 Apr 23 16:58:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: met1 marked with m1_float not floating
r_1189_X.22
0 0 2 Apr 23 16:58:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on met1 is floating
r_1190_X.22
0 0 2 Apr 23 16:58:33 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on met1 is texted as both tied and floating (IP Level)
r_1191_X.22
0 0 2 Apr 23 17:05:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating m2_float or m2_tie text not over met2
r_1192_X.22
0 0 2 Apr 23 17:05:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: met2 marked with m2_float not floating
r_1193_X.22
0 0 2 Apr 23 17:05:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on met2 is floating
r_1194_X.22
0 0 2 Apr 23 17:05:02 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on met2 is texted as both tied and floating (IP Level)
r_1195_X.22
0 0 2 Apr 23 17:07:10 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating m3_float or m3_tie text not over met3
r_1196_X.22
0 0 2 Apr 23 17:07:10 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: met3 marked with m3_float not floating
r_1197_X.22
0 0 2 Apr 23 17:07:10 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on met3 is floating
r_1198_X.22
0 0 2 Apr 23 17:07:10 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on met3 is texted as both tied and floating (IP Level)
r_1199_X.22
0 0 2 Apr 23 17:07:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating m4_float or m4_tie text not over met4
r_1200_X.22
0 0 2 Apr 23 17:07:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: met4 marked with m4_float not floating
r_1201_X.22
0 0 2 Apr 23 17:07:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on met4 is floating
r_1202_X.22
0 0 2 Apr 23 17:07:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on met4 is texted as both tied and floating (IP Level)
r_1203_X.22
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Floating m5_float or m5_tie text not over met5
r_1204_X.22
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: met5 marked with m5_float not floating
r_1205_X.22
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Nets on met5 is floating
r_1206_X.22
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.22: Metal on met5 is texted as both tied and floating (IP Level)
r_1207_X.24
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
X.24: condiode label must be in isolated pwell
r_1208_pad.20
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.20: met1 shielding pad, must not float
r_1209_pad.20
0 0 2 Apr 23 17:07:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.20: met1 shielding pad, must not connected to pad
r_1210_m1.x.1
0 0 2 Apr 23 17:07:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.x.1: <70% metal density when 700x700 window 100% covered by mm1.waffledrop
r_1211_m1.x.1
0 0 2 Apr 23 17:07:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.x.1: <65% metal density when 700x700 window 80-100% covered by mm1.waffledrop
r_1212_m1.x.1
0 0 2 Apr 23 17:07:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.x.1: <60% metal density when 700x700 window 60-80% covered by mm1.waffledrop
r_1213_m1.x.1
0 0 2 Apr 23 17:07:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.x.1: <50% metal density when 700x700 window 50-60% covered by mm1.waffledrop
r_1214_m1.x.1
0 0 2 Apr 23 17:07:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.x.1: <40% metal density when 700x700 window 40-50% covered by mm1.waffledrop
r_1215_m1.x.1
0 0 2 Apr 23 17:07:22 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m1.x.1: <30% metal density when 700x700 window 30-40% covered by mm1.waffledrop
r_1216_m2.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.x.1: <70% metal density when 700x700 window 100% covered by mm2.waffledrop
r_1217_m2.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.x.1: <65% metal density when 700x700 window 80-100% covered by mm2.waffledrop
r_1218_m2.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.x.1: <60% metal density when 700x700 window 60-80% covered by mm2.waffledrop
r_1219_m2.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.x.1: <50% metal density when 700x700 window 50-60% covered by mm2.waffledrop
r_1220_m2.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.x.1: <40% metal density when 700x700 window 40-50% covered by mm2.waffledrop
r_1221_m2.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m2.x.1: <30% metal density when 700x700 window 30-40% covered by mm2.waffledrop
r_1222_m3.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.x.1: <70% metal density when 700x700 window 100% covered by mm3.waffledrop
r_1223_m3.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.x.1: <65% metal density when 700x700 window 80-100% covered by mm3.waffledrop
r_1224_m3.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.x.1: <60% metal density when 700x700 window 60-80% covered by mm3.waffledrop
r_1225_m3.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.x.1: <50% metal density when 700x700 window 50-60% covered by mm3.waffledrop
r_1226_m3.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.x.1: <40% metal density when 700x700 window 40-50% covered by mm3.waffledrop
r_1227_m3.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m3.x.1: <30% metal density when 700x700 window 30-40% covered by mm3.waffledrop
r_1228_m4.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.x.1: <70% metal density when 700x700 window 100% covered by mm4.waffledrop
r_1229_m4.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.x.1: <65% metal density when 700x700 window 80-100% covered by mm4.waffledrop
r_1230_m4.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.x.1: <60% metal density when 700x700 window 60-80% covered by mm4.waffledrop
r_1231_m4.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.x.1: <50% metal density when 700x700 window 50-60% covered by mm4.waffledrop
r_1232_m4.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.x.1: <40% metal density when 700x700 window 40-50% covered by mm4.waffledrop
r_1233_m4.x.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
m4.x.1: <30% metal density when 700x700 window 30-40% covered by mm4.waffledrop
r_1234_metblk.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: 0.14 min. spacing of met1 & met1Block
r_1235_metblk.1
0 0 2 Apr 23 17:07:25 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: met1 must not overlap met1Block
r_1236_metblk.3
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.3: 0.145 min. spacing of met1Block & met1Routing
r_1237_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: 0.14 min. spacing of met2 & met2Block
r_1238_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: met2 must not overlap met2Block
r_1239_metblk.3
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.3: 0.145 min. spacing of met2Block & met2Routing
r_1240_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: 0.3 min. spacing of met3 & met3Block
r_1241_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: met3 must not overlap met3Block
r_1242_metblk.3
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.3: 0.305 min. spacing of met3Block & met3Routing
r_1243_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: 0.3 min. spacing of met4 & met4Block
r_1244_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: met4 must not overlap met4Block
r_1245_metblk.3
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.3: 0.305 min. spacing of met4Block & met4Routing
r_1246_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: 1.6 min. spacing of met5 & met5Block
r_1247_metblk.1
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.1: met5 must not overlap met5Block
r_1248_metblk.3
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.3: 1.605 min. spacing of met5Block & met5Routing
r_1249_metblk.2
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.2: 0.17 min. spacing of li1 & li1Block
r_1250_metblk.2
0 0 2 Apr 23 17:07:38 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.2: li1 must not overlap li1Block
r_1251_metblk.4
0 0 2 Apr 23 17:07:44 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.4: 0.17 min. spacing of li1Block & li1Routing
r_1252_metblk.6
0 0 2 Apr 23 17:07:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.6: prBoundary.boundary not allowed in layout
r_1253_metblk.7
0 0 2 Apr 23 17:07:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.7: poly.boundary not allowed in layout
r_1254_metblk.7
0 0 2 Apr 23 17:07:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.7: diff.boundary not allowed in layout
r_1255_metblk.7
0 0 2 Apr 23 17:07:46 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
metblk.7: tap.boundary not allowed in layout
r_1256_fomdmy.1
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.1: 0.5 min. width of fomDummyDRC
r_1257_fomdmy_1a
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy_1a: max width of fom dummy 25.0 
r_1258_fomdmy.2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.2: 0.4 min. spacing/notch of fomDummyDRC
r_1259_fomdmy.4
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.4: 1 min. spacing of fomDummyDRC & SEALID
r_1260_fomdmy.4
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.4: fomDummyDRC must not overlap SEALID
r_1261_fomdmy.6
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.6: 3.25 min. spacing of fomDummyDRC & fuse
r_1262_fomdmy.6
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.6: fomDummyDRC must not overlap fuse
r_1263_fomdmy.7
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.7: 0.13 min. spacing of fomDummyDRC & nsdm
r_1264_fomdmy.7
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.7: fomDummyDRC must not overlap nsdm
r_1265_fomdmy.7
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.7: 0.13 min. spacing of fomDummyDRC & psdm
r_1266_fomdmy.7
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.7: fomDummyDRC must not overlap psdm
r_1267_fomdmy.8
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.8: 0.18 min. enclosure of fomDummyDRC by nwell
r_1268_fomdmy.9
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.9: 0.34 min. spacing of fomDummyDRC & nwell
r_1269_fomdmy.10
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.10: 0.43 min. enclosure of fomDummyDRC by HVnwell
r_1270_fomdmy.11
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.11: 0.33 min. spacing of fomDummyDRC & HVnwell
r_1271_fomdmy.12
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.12: 0.5 min. enclosure of fomDummyDRC by FRAMEID
r_1272_fomdmy.13
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
fomdmy.13: 0.5 min. spacing of fomDummyDRC & dieCut
r_1273_rdl.1
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.1: 10 min. width of rdl
r_1274_rdl.2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.2: 10 min. spacing/notch of rdl
r_1275_rdl.2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.2: 10 min. spacing/notch of rdl
r_1276_rdl.3
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.3: 10.75 min. enclosure of pad by nonCSPRDL
r_1277_rdl.4
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.4: 15 min. enclosure of rdl by SEALnoHoles_ORIGIN
r_1278_rdl.5
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.5: (rdl OR ccu1m.mk) in scribe must not overlap areaid.ft.
r_1279_rdl.6
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
rdl.6: 19.66 min. spacing of nonCSPRDL & pad
r_1280_mf.1&2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.1&2: metal4 fuse should be rectangular
r_1281_mf.1&2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.1&2: 0.8 min. width of metal4 fuse
r_1282_mf.1&2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.1&2: 0.8 max. width of metal4 fuse
r_1283_mf.1&2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.1&2: 7.2 min. length of metal4 fuse
r_1284_mf.1&2
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.1&2: 7.2 max. length of metal4 fuse
r_1285_mf.3
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.3: 2.75 min. spacing of target
r_1286_mf.5
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.5: 0.83 max extension of met4 beyond fuse boundary
r_1287_mf.22
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.22: 1.96 min. spacing of METxContact
r_1288_mf.6
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.6: 3.295 min. spacing of target & met1
r_1289_mf.6
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.6: target must not overlap met1
r_1290_mf.7
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.7: 3.295 min. spacing of target & li1
r_1291_mf.7
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.7: target must not overlap li1
r_1292_mf.8
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.8: 2.655 min. spacing of target & poly
r_1293_mf.8
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.8: target must not overlap poly
r_1294_mf.9
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.9: 2.635 min. spacing of target & tap
r_1295_mf.9
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.9: target must not overlap tap
r_1296_mf.10
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.10: 3.245 min. spacing of target & diff
r_1297_mf.10
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.10: target must not overlap diff
r_1298_mf.11
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.11: 3.315 min. spacing of target & nwell
r_1299_mf.11
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.11: target must not overlap nwell
r_1300_mf.19
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.19: 3.295 min. spacing of target & met2
r_1301_mf.19
0 0 2 Apr 23 17:07:47 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.19: target must not overlap met2
r_1302_mf.12
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.12: mf.12: 2.40x0.50 size of a fuse_shield
r_1303_mf.4
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.4: 3.295 min. spacing of target & METnotFUSE
r_1304_mf.13
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.13: 2.195 min. spacing of target & fuseShield
r_1305_mf.14
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.14: max shield to target spacing
r_1306_mf.15a
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.15a: fuseShield is allowed for non_isolated fuse edges ONLY
r_1307_mf.15b
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.15b: fuseShield is required between peri metal and non isolated fuse edges
r_1308_mf.18
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.18: 0.6 min&max space between fuse_shield and met4
r_1309_mf.20
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.20: only one fuse allowed per metal line
r_1310_mf.24
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.24: 3.295 min. spacing of target & met5
r_1311_mf.24
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
mf.24: target must not overlap met5
r_1312_pad.1
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.1: padPL pcells should be used for bondpad
r_1313_pad.1
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.1: padPL pcells should have text plastic to be used for bondpad
r_1314_pad.16
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.16: Hermetic package pads are not supported inthis flow
r_1315_pad.4/4a
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.4/4a: 2.7 min. enclosure of bondpadNormal by met5
r_1316_pad.5
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.5: Zero Spacing between lower level met4 ring and Advanced Bondpad
r_1317_pad.6
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6: 5 min. spacing of smallGroupingY & met5OutsidePad
r_1318_pad.7
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7: 10 min. spacing of largeGroupingY & met5OutsidePad
r_1319_pad.6
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6: 5 min. spacing of smallGroupingX & met5OutsidePad
r_1320_pad.7
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7: 10 min. spacing of largeGroupingX & met5OutsidePad
r_1321_pad.6
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6: 5 min. spacing of smallGroupingY & met4OutsidePad
r_1322_pad.7
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7: 10 min. spacing of largeGroupingY & met4OutsidePad
r_1323_pad.6
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6: 5 min. spacing of smallGroupingX & met4OutsidePad
r_1324_pad.7
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7: 10 min. spacing of largeGroupingX & met4OutsidePad
r_1325_pad.10
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.10: bondpadNormalNoprobe must not overlap met4
r_1326_pad.11
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.11: Bondpad should not have 90 degree corner
r_1327_pad.11
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.11: Bondpad should have 45 degree corner
r_1328_pad.11
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.11: Bondpad should have only 4 45 degree corner
r_1329_pad.11
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.11: Bondpad should have only 4 orthogonal edges
r_1330_pad.12
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.12: 7.0 Min length of 45 degree bevel on Bond pad
r_1331_pad.13
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.13: 8.8 Max length of 45 degree bevel on Bond pad
r_1332_pad.14
0 0 2 Apr 23 17:07:48 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.14: 16.99 min. enclosure of anyPadPlastic by solid_seal
r_1333_pad.15
58 58 2 Apr 23 17:07:48 2020                   
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.15: 500.0 Max spacing between bondpad opening and edge of scribe line(outer end of seal ring)
p 1 8
CN striVe c 1 0 0 1 0 0
872520 3276780
877470 3271830
927570 3271830
932520 3276780
932520 3336880
927570 3341830
877470 3341830
872520 3336880
p 2 8
872520 3473780
877470 3468830
927570 3468830
932520 3473780
932520 3533880
927570 3538830
877470 3538830
872520 3533880
p 3 8
869215 1903950
874165 1899000
934265 1899000
939215 1903950
939215 1954050
934265 1959000
874165 1959000
869215 1954050
p 4 8
869215 2172950
874165 2168000
934265 2168000
939215 2172950
939215 2223050
934265 2228000
874165 2228000
869215 2223050
p 5 8
869215 2309950
874165 2305000
934265 2305000
939215 2309950
939215 2360050
934265 2365000
874165 2365000
869215 2360050
p 6 8
869215 2447950
874165 2443000
934265 2443000
939215 2447950
939215 2498050
934265 2503000
874165 2503000
869215 2498050
p 7 8
869215 2584950
874165 2580000
934265 2580000
939215 2584950
939215 2635050
934265 2640000
874165 2640000
869215 2635050
p 8 8
869215 2721950
874165 2717000
934265 2717000
939215 2721950
939215 2772050
934265 2777000
874165 2777000
869215 2772050
p 9 8
869215 2858950
874165 2854000
934265 2854000
939215 2858950
939215 2909050
934265 2914000
874165 2914000
869215 2909050
p 10 8
869215 2995950
874165 2991000
934265 2991000
939215 2995950
939215 3046050
934265 3051000
874165 3051000
869215 3046050
p 11 8
869215 3132950
874165 3128000
934265 3128000
939215 3132950
939215 3183050
934265 3188000
874165 3188000
869215 3183050
p 12 8
869600 1370950
874550 1366000
934650 1366000
939600 1370950
939600 1421050
934650 1426000
874550 1426000
869600 1421050
p 13 8
869600 1502950
874550 1498000
934650 1498000
939600 1502950
939600 1553050
934650 1558000
874550 1558000
869600 1553050
p 14 8
869600 1634950
874550 1630000
934650 1630000
939600 1634950
939600 1685050
934650 1690000
874550 1690000
869600 1685050
p 15 8
869600 1766950
874550 1762000
934650 1762000
939600 1766950
939600 1817050
934650 1822000
874550 1822000
869600 1817050
p 16 8
869600 2035950
874550 2031000
934650 2031000
939600 2035950
939600 2086050
934650 2091000
874550 2091000
869600 2086050
p 17 8
1106500 3752850
1111450 3747900
1161550 3747900
1166500 3752850
1166500 3812950
1161550 3817900
1111450 3817900
1106500 3812950
p 18 8
1129500 1132050
1134450 1127100
1184550 1127100
1189500 1132050
1189500 1192150
1184550 1197100
1134450 1197100
1129500 1192150
p 19 8
1237500 3752850
1242450 3747900
1292550 3747900
1297500 3752850
1297500 3812950
1292550 3817900
1242450 3817900
1237500 3812950
p 20 8
1287500 1132050
1292450 1127100
1342550 1127100
1347500 1132050
1347500 1192150
1342550 1197100
1292450 1197100
1287500 1192150
p 21 8
1368500 3752850
1373450 3747900
1423550 3747900
1428500 3752850
1428500 3812950
1423550 3817900
1373450 3817900
1368500 3812950
p 22 8
1445500 1132050
1450450 1127100
1500550 1127100
1505500 1132050
1505500 1192150
1500550 1197100
1450450 1197100
1445500 1192150
p 23 8
1498500 3752850
1503450 3747900
1553550 3747900
1558500 3752850
1558500 3812950
1553550 3817900
1503450 3817900
1498500 3812950
p 24 8
1603500 1132050
1608450 1127100
1658550 1127100
1663500 1132050
1663500 1192150
1658550 1197100
1608450 1197100
1603500 1192150
p 25 8
1629500 3752850
1634450 3747900
1684550 3747900
1689500 3752850
1689500 3812950
1684550 3817900
1634450 3817900
1629500 3812950
p 26 8
1761500 1132050
1766450 1127100
1816550 1127100
1821500 1132050
1821500 1192150
1816550 1197100
1766450 1197100
1761500 1192150
p 27 8
1765500 3753235
1770450 3748285
1820550 3748285
1825500 3753235
1825500 3813335
1820550 3818285
1770450 3818285
1765500 3813335
p 28 8
1901500 3753235
1906450 3748285
1956550 3748285
1961500 3753235
1961500 3813335
1956550 3818285
1906450 3818285
1901500 3813335
p 29 8
1919500 1131665
1924450 1126715
1974550 1126715
1979500 1131665
1979500 1191765
1974550 1196715
1924450 1196715
1919500 1191765
p 30 8
2036500 3753235
2041450 3748285
2091550 3748285
2096500 3753235
2096500 3813335
2091550 3818285
2041450 3818285
2036500 3813335
p 31 8
2082500 1131665
2087450 1126715
2137550 1126715
2142500 1131665
2142500 1191765
2137550 1196715
2087450 1196715
2082500 1191765
p 32 8
2172500 3753235
2177450 3748285
2227550 3748285
2232500 3753235
2232500 3813335
2227550 3818285
2177450 3818285
2172500 3813335
p 33 8
2244500 1131665
2249450 1126715
2299550 1126715
2304500 1131665
2304500 1191765
2299550 1196715
2249450 1196715
2244500 1191765
p 34 8
2308500 3753235
2313450 3748285
2363550 3748285
2368500 3753235
2368500 3813335
2363550 3818285
2313450 3818285
2308500 3813335
p 35 8
2407500 1131665
2412450 1126715
2462550 1126715
2467500 1131665
2467500 1191765
2462550 1196715
2412450 1196715
2407500 1191765
p 36 8
2443500 3753235
2448450 3748285
2498550 3748285
2503500 3753235
2503500 3813335
2498550 3818285
2448450 3818285
2443500 3813335
p 37 8
2570500 1131665
2575450 1126715
2625550 1126715
2630500 1131665
2630500 1191765
2625550 1196715
2575450 1196715
2570500 1191765
p 38 8
2579500 3753235
2584450 3748285
2634550 3748285
2639500 3753235
2639500 3813335
2634550 3818285
2584450 3818285
2579500 3813335
p 39 8
2715500 3753235
2720450 3748285
2770550 3748285
2775500 3753235
2775500 3813335
2770550 3818285
2720450 3818285
2715500 3813335
p 40 8
2733500 1131665
2738450 1126715
2788550 1126715
2793500 1131665
2793500 1191765
2788550 1196715
2738450 1196715
2733500 1191765
p 41 8
2851500 3753235
2856450 3748285
2906550 3748285
2911500 3753235
2911500 3813335
2906550 3818285
2856450 3818285
2851500 3813335
p 42 8
2896500 1131665
2901450 1126715
2951550 1126715
2956500 1131665
2956500 1191765
2951550 1196715
2901450 1196715
2896500 1191765
p 43 8
2986500 3753235
2991450 3748285
3041550 3748285
3046500 3753235
3046500 3813335
3041550 3818285
2991450 3818285
2986500 3813335
p 44 8
3059500 1131665
3064450 1126715
3114550 1126715
3119500 1131665
3119500 1191765
3114550 1196715
3064450 1196715
3059500 1191765
p 45 8
3122500 3753235
3127450 3748285
3177550 3748285
3182500 3753235
3182500 3813335
3177550 3818285
3127450 3818285
3122500 3813335
p 46 8
3222500 1131665
3227450 1126715
3277550 1126715
3282500 1131665
3282500 1191765
3277550 1196715
3227450 1196715
3222500 1191765
p 47 8
3258500 3753235
3263450 3748285
3313550 3748285
3318500 3753235
3318500 3813335
3313550 3818285
3263450 3818285
3258500 3813335
p 48 8
3482400 1433950
3487350 1429000
3547450 1429000
3552400 1433950
3552400 1484050
3547450 1489000
3487350 1489000
3482400 1484050
p 49 8
3482400 1632950
3487350 1628000
3547450 1628000
3552400 1632950
3552400 1683050
3547450 1688000
3487350 1688000
3482400 1683050
p 50 8
3482400 1831950
3487350 1827000
3547450 1827000
3552400 1831950
3552400 1882050
3547450 1887000
3487350 1887000
3482400 1882050
p 51 8
3482400 2031950
3487350 2027000
3547450 2027000
3552400 2031950
3552400 2082050
3547450 2087000
3487350 2087000
3482400 2082050
p 52 8
3482400 2230950
3487350 2226000
3547450 2226000
3552400 2230950
3552400 2281050
3547450 2286000
3487350 2286000
3482400 2281050
p 53 8
3482785 2429950
3487735 2425000
3547835 2425000
3552785 2429950
3552785 2480050
3547835 2485000
3487735 2485000
3482785 2480050
p 54 8
3482785 2633950
3487735 2629000
3547835 2629000
3552785 2633950
3552785 2684050
3547835 2689000
3487735 2689000
3482785 2684050
p 55 8
3482785 2838950
3487735 2834000
3547835 2834000
3552785 2838950
3552785 2889050
3547835 2894000
3487735 2894000
3482785 2889050
p 56 8
3482785 3042950
3487735 3038000
3547835 3038000
3552785 3042950
3552785 3093050
3547835 3098000
3487735 3098000
3482785 3093050
p 57 8
3482785 3246950
3487735 3242000
3547835 3242000
3552785 3246950
3552785 3297050
3547835 3302000
3487735 3302000
3482785 3297050
p 58 8
3482785 3450950
3487735 3446000
3547835 3446000
3552785 3450950
3552785 3501050
3547835 3506000
3487735 3506000
3482785 3501050
r_1334_pad.17
0 0 2 Apr 23 17:07:52 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.17: 1.5 min. spacing/notch of met1UndPadMetOnly
r_1335_pad.18
0 0 2 Apr 23 17:07:52 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.18: 0.14 min width of met1 under pad metal
r_1336_pad.17
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.17: 1.5 min. spacing/notch of met2UndPadMetOnly
r_1337_pad.18
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.18: 0.14 min width of met2 under pad metal
r_1338_pad.17
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.17: 1.5 min. spacing/notch of met3UndPadMetOnly
r_1339_pad.18
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.18: 0.3 min width of met3 under pad metal
r_1340_pad.19
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.19: 25 max width of met1 under pad metal
r_1341_pad.19
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.19: 25 max width of met2 under pad metal
r_1342_pad.19
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.19: 6 max width of met3 under pad metal
r_1343_pad.2.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.2.1: 60 min width  of padPLFP in x direction
r_1344_pad.3.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.3.1: 60 min length of padPLFP in y direction
r_1345_pad.4.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.4.1: 60 min width  of padPLSTG in x direction
r_1346_pad.5.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.5.1: 60 min length of padPLSTG in y direction
r_1347_pad.6.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6.1: 60 min width  of padPLHP in x direction
r_1348_pad.6.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6.1: 60 min length of padPLHP in y direction
r_1349_pad.6.1a
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6.1a: 58 min width  of padPLHPcu in x direction
r_1350_pad.6.1b
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6.1b: 60 min length of padPLHPcu in y direction
r_1351_pad.6.1a/b
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.6.1a/b: 58x60 min dimensions of padPLHPcu which are not within 50 of other pad
r_1352_pad.7.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7.1: 50 min width  of padPLWLBI in x direction
r_1353_pad.8.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.8.1: 60 min length of padPLWLBI in y direction
r_1354_pad_2/3.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad_2/3.1: bondpadCuPillarSz should be rectangular
r_1355_pad_2/3.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad_2/3.1: 39 min. width of bondpadCuPillarSz
r_1356_pad_2/3.1
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad_2/3.1: 39 max. length of bondpadCuPillarSz
r_1357_pad.1.2
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.1.2: 8 min space of padPLFP in x direction to padPLFP/HP/STG/WLBI
r_1358_pad.2.2
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.2.2: 15 min space of padPLHPorg in x direction to padPLHP/STG/WLBI
r_1359_pad.2.2a
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.2.2a: 7 min space of padPLHPcu in x direction to padPLHPcu/STG/WLBI
r_1360_pad.3.2
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.3.2: 50 min space of padPLWLBI in x direction to padPLSTG/WLBI
r_1361_pad.4.2
0 0 2 Apr 23 17:07:54 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.4.2: 30 min space of padPLSTG in x direction to padPLSTG
r_1362_pad.9.1
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.9.1: 150.0um Max Width/Length of bond pad
r_1363_pad_6_2
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad_6_2: 39.8 min. spacing of padCenterSTGinDieXy
r_1364_pad_6_2
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad_6_2: 39.8 min. spacing of padCenterSTGinDieYy
r_1365_pad_5_2_4
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad_5_2_4: 9 min. spacing of padSTGinDieXsp & bondPadSTG
r_1366_pad.7.2.1
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7.2.1: 284 min space of padPLSTG in x direction to adjacent scribe
r_1367_pad.7.2.2
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7.2.2: 200 min space of padPLFP  in x direction to adjacent scribe
r_1368_pad.7.2.2
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
pad.7.2.2: 200 min space of padPLWLBI in x direction to adjacent scribe
r_1369_cupad.1
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.1: 5 min. width of pad opening inside inductor
r_1370_cupad.2
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.2: 0 min. enclosure of pad opening inside inductor by pmm
r_1371_cupad.2
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.2: pad opening inside inductor must be enclosed by pmm
r_1372_cupad.3
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.3: 2.7 min. enclosure of pad opening inside inductor by met5
r_1373_cupad.3
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.3: pad opening inside inductor must be enclosed by met5
r_1374_cupad.4
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.4: 10.75 min. enclosure of pmm  inside inductor by rdl
r_1375_cupad.4
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cupad.4: pmm  inside inductor must be enclosed by rdl
r_1376_scribe.5
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide diff >= 10.0x10.0um within 150.0 of scribe junction
r_1377_scribe.5
0 0 2 Apr 23 17:07:55 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide poly >= 10.0x10.0um within 150.0 of scribe junction
r_1378_scribe.5
0 0 2 Apr 23 17:08:04 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide li1 >= 10.0x10.0um within 150.0 of scribe junction
r_1379_scribe.5
0 0 2 Apr 23 17:08:10 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide met1 >= 10.0x10.0um within 150.0 of scribe junction
r_1380_scribe.5
0 0 2 Apr 23 17:08:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide met2 >= 10.0x10.0um within 150.0 of scribe junction
r_1381_scribe.5
0 0 2 Apr 23 17:08:12 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide met3 >= 10.0x10.0um within 150.0 of scribe junction
r_1382_scribe.5
0 0 2 Apr 23 17:08:18 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide mcon >= 10.0x10.0um within 150.0 of scribe junction
r_1383_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide licon1 >= 10.0x10.0um within 150.0 of scribe junction
r_1384_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide via >= 10.0x10.0um within 150.0 of scribe junction
r_1385_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide via2 >= 10.0x10.0um within 150.0 of scribe junction
r_1386_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide met4 >= 10.0x10.0um within 150.0 of scribe junction
r_1387_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide met5 >= 10.0x10.0um within 150.0 of scribe junction
r_1388_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide via3 >= 10.0x10.0um within 150.0 of scribe junction
r_1389_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide via4 >= 10.0x10.0um within 150.0 of scribe junction
r_1390_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide mm1mk >= 10.0x10.0um within 150.0 of scribe junction
r_1391_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide mm2mk >= 10.0x10.0um within 150.0 of scribe junction
r_1392_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide mm3mk >= 10.0x10.0um within 150.0 of scribe junction
r_1393_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide p1mmk >= 10.0x10.0um within 150.0 of scribe junction
r_1394_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide fommk >= 10.0x10.0um within 150.0 of scribe junction
r_1395_scribe.5
0 0 2 Apr 23 17:08:19 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide ctm1mk >= 10.0x10.0um within 150.0 of scribe junction
r_1396_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide licm1mk >= 10.0x10.0um within 150.0 of scribe junction
r_1397_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide li1mmk >= 10.0x10.0um within 150.0 of scribe junction
r_1398_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide vimmk >= 10.0x10.0um within 150.0 of scribe junction
r_1399_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide vim2mk >= 10.0x10.0um within 150.0 of scribe junction
r_1400_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide mm4mk >= 10.0x10.0um within 150.0 of scribe junction
r_1401_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide mm5mk >= 10.0x10.0um within 150.0 of scribe junction
r_1402_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide vim3mk >= 10.0x10.0um within 150.0 of scribe junction
r_1403_scribe.5
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.5: Wide vim4mk >= 10.0x10.0um within 150.0 of scribe junction
r_1404_scribe.6a
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.6a: pad inside frame or moduleCut without text label
r_1405_scribe.6d
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.6d: mconOrVia must not overlap EUTESTPAD
r_1406_scribe.6e
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.6e: EUTESTPAD must be enclosed by areaid module cut AND areaid etest
r_1407_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: nwell drawn layer cannot straddle areaid:ModuleCut
r_1408_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: diff drawn layer cannot straddle areaid:ModuleCut
r_1409_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: dnwell drawn layer cannot straddle areaid:ModuleCut
r_1410_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: tap drawn layer cannot straddle areaid:ModuleCut
r_1411_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: lvtn drawn layer cannot straddle areaid:ModuleCut
r_1412_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: hvtp drawn layer cannot straddle areaid:ModuleCut
r_1413_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: hvi drawn layer cannot straddle areaid:ModuleCut
r_1414_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: tunm drawn layer cannot straddle areaid:ModuleCut
r_1415_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: poly drawn layer cannot straddle areaid:ModuleCut
r_1416_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: npc drawn layer cannot straddle areaid:ModuleCut
r_1417_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: nsdm drawn layer cannot straddle areaid:ModuleCut
r_1418_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: psdm drawn layer cannot straddle areaid:ModuleCut
r_1419_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: licon1 drawn layer cannot straddle areaid:ModuleCut
r_1420_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: li1 drawn layer cannot straddle areaid:ModuleCut
r_1421_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: mcon drawn layer cannot straddle areaid:ModuleCut
r_1422_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: met1 drawn layer cannot straddle areaid:ModuleCut
r_1423_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: via drawn layer cannot straddle areaid:ModuleCut
r_1424_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: met2 drawn layer cannot straddle areaid:ModuleCut
r_1425_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: vhvi drawn layer cannot straddle areaid:ModuleCut
r_1426_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: via2 drawn layer cannot straddle areaid:ModuleCut
r_1427_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: met3 drawn layer cannot straddle areaid:ModuleCut
r_1428_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: via3 drawn layer cannot straddle areaid:ModuleCut
r_1429_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: met4 drawn layer cannot straddle areaid:ModuleCut
r_1430_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: via4 drawn layer cannot straddle areaid:ModuleCut
r_1431_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: met5 drawn layer cannot straddle areaid:ModuleCut
r_1432_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: nsm drawn layer cannot straddle areaid:ModuleCut
r_1433_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: pad drawn layer cannot straddle areaid:ModuleCut
r_1434_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: ldntm drawn layer cannot straddle areaid:ModuleCut
r_1435_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: hvntm drawn layer cannot straddle areaid:ModuleCut
r_1436_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: pmm drawn layer cannot straddle areaid:ModuleCut
r_1437_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: pnp drawn layer cannot straddle areaid:ModuleCut
r_1438_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: capacitor drawn layer cannot straddle areaid:ModuleCut
r_1439_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: ncm drawn layer cannot straddle areaid:ModuleCut
r_1440_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: pmm2 drawn layer cannot straddle areaid:ModuleCut
r_1441_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: inductor drawn layer cannot straddle areaid:ModuleCut
r_1442_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: rdl drawn layer cannot straddle areaid:ModuleCut
r_1443_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: rpm drawn layer cannot straddle areaid:ModuleCut
r_1444_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: hvtr drawn layer cannot straddle areaid:ModuleCut
r_1445_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: ubm drawn layer cannot straddle areaid:ModuleCut
r_1446_scribe.7
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.7: bump drawn layer cannot straddle areaid:ModuleCut
r_1447_scribe.8
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.8: Etest-pad-67 and Etest-pad-35 should not exist in the same module
r_1448_scribe.9
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.9: Etest pad Width and Length is either 67.00 um or 35.00um
r_1449_scribe.10
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.10: Min/Max Spacing between Etest pad (67um*67um) with in same module should be 90.5um
r_1450_scribe.10
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.10: Min/MaxSpacing between Etest pad (67um*67um)with in same module should be 90.5um 
r_1451_scribe.11
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.11: Min/Max Spacing between Etest pad (35um*35um) with in same module should be 55um
r_1452_scribe.11
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.11: Min/MaxSpacing between Etest pad (35um*35um)with in same module should be 55um 
r_1453_scribe.12
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.12: 7.5 min. enclosure of ETESTPAD by areaid module cut
r_1454_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.50um min. enclosure of Etest pad by met1
r_1455_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.5 min. enclosure of ETESTPAD_met1 by met1
r_1456_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.50um min. enclosure of Etest pad by met2
r_1457_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.5 min. enclosure of ETESTPAD_met2 by met2
r_1458_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.50um min. enclosure of Etest pad by met3
r_1459_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.5 min. enclosure of ETESTPAD_met3 by met3
r_1460_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.50um min. enclosure of Etest pad by met4
r_1461_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.5 min. enclosure of ETESTPAD_met4 by met4
r_1462_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.50um min. enclosure of Etest pad by met5
r_1463_scribe.13
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.13: 2.5 min. enclosure of ETESTPAD_met5 by met5
r_1464_scribe.14
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.14: Minimum Utest pad Width and Length is 10um
r_1465_scribe.15
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.15: Min Spacing between Utest pad opening should be 15um
r_1466_scribe.16
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.16: Min Spacing between Utest pad and Etest pad opening should be 7um
r_1467_scribe.17
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.17: 2.5 min. enclosure of UTESTPAD by met5
r_1468_scribe.18
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.18: Spacing of E-test pad opening to E-test pad opening in the same module must all be equal
r_1469_scribe.18
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.18: Spacing of E-test pad opening to E-test pad opening in the same module must all be equal
r_1470_scribe.19
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.19: 76 min. width of realScribeLine
r_1471_scribe.20
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.20: Pad.dg is to be drawn from 3.0um from scribe edge to 13.0um from scribe edge
r_1472_scribe.21
0 0 2 Apr 23 17:08:20 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
scribe.21: Scribe must not enclose pdm.dg nor pdm.mk except for etest pads, die pad rings
r_733_capm.x.1
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.x.1: ccapm mask should not be used
r_734_capm.1
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.1: 1 min. width of capm
r_735_capm.2a
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.2a: 0.84 min. spacing/notch of capm
r_736_capm.2b
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.2b: 1.2 min spacing between bottom plates
r_737_capm.2b
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.2b: 1.2 min. spacing of m3_bot_plate 
r_738_capm.3
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.3: 0.14 min. enclosure of capm by met3
r_739_capm.4
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.4: 0.14 min. enclosure of via3 by capm
r_740_capm.5
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.5: 0.14 min. spacing of capm & via3
r_741_capm.6
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.6: Maximum aspect ratio (L/W) is 20.00
r_742_capm.7
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.7: Only Rectangular or L-shape Capacitors allowed
r_743_capm.8
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.8: 0.14 min. spacing of capm & via2
r_744_capm.8
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.8: capm must not overlap via2
r_745_capm.9
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.9: capm must be enclosed by met3
r_745_capm.11
0 0 2 Apr 23 17:09:11 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
capm.11: min spacing of capm and met3 not overlapping capm
r_746_cap2m.1
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.1: 1 min. width of cap2m
r_747_cap2m.2a
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.2a: 0.84 min. spacing/notch of cap2m
r_748_cap2m.2b
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.2b: 1.2 min spacing between m4 bottom plates
r_749_cap2m.2b
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.2b: 1.2 min. spacing of m4_bot_plate
r_750_cap2m.3
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.3: 0.14 min. enclosure of cap2m by met4
r_751_cap2m.4
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.4: 0.20 min. enclosure of via4 by cap2m
r_752_cap2m.5
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.5: 0.20 min. spacing of cap2m & via4
r_753_cap2m.6
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.6: Maximum aspect ratio (L/W) is 20.00
r_754_cap2m.7
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.7: Only Rectangular or L-shape Capacitors allowed
r_755_cap2m.8
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.8: 0.14 min. spacing of cap2m & via3
r_756_cap2m.8
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.8: cap2m must not overlap via3
r_756_cap2m.11
0 0 2 Apr 23 17:09:13 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cap2m.11: min spacing of cap2m and met4 not overlapping cap2m
r_836_viatop.1
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.1: viatop should be rectangular
r_837_viatop.1
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.1: 0.42 min. width of viatop
r_838_viatop.1
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.1: 0.42 max. length of viatop
r_839_viatop_2
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop_2: 0.42 min. spacing/notch of viatop
r_840_viatop.3
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.3: Only min square ViaTop's are allowed
r_841_viatop.4
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.4: 0.29 min. enclosure of viatop by met5
r_842_viatop.4
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.4: viatop must be enclosed by met5
r_843_viatop.5
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop.5: ViaTop must not be placed over Pad
r_844_viatop_6
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop_6: 10.00 min. spacing of viatop to pad
r_845_viatop_7
0 0 2 Apr 23 17:09:57 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
viatop_7: viatop connected to gate must be connected to antenna diode
r_1473_chvtpm.1
0 0 2 Apr 23 17:10:00 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvtpm.1: 0.38 min. width of CLHVTPM
r_1474_chvtpm.2a
0 0 2 Apr 23 17:10:00 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvtpm.2a: 0.38 min. spacing/notch of CLHVTPM
r_1475_chvtpm.3
0 0 2 Apr 23 17:10:00 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvtpm.3: 0 min. enclosure of ((LVnwell not overlapping Var_channel) NOT lvtn) by CLHVTPM
r_1476_chvtpm.4
0 0 2 Apr 23 17:10:00 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvtpm.4: 0 min. enclosure of ((LVnwell overlapping Var_channel) AND hvtp) by CLHVTPM
r_1477_clvtnm.1
0 0 2 Apr 23 17:10:03 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clvtnm.1: 0.38 min. width of clvtnm in periphery
r_1478_clvtnm.2
0 0 2 Apr 23 17:10:04 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
clvtnm.2: 0.38 min. spacing/notch of CLLVTNM
r_1479_cntm.2
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.2: 0.7 min. spacing/notch of CLNTM
r_1480_cntm.1
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.1: 0.84 min. width of CLNTM
r_1481_cntm.3
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.3: 0 min. enclosure of nwell by CLNTM
r_1482_cntm.3
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.3: nwell must be enclosed by CLNTM
r_1483_cntm.4a
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.4a: 0 min. enclosure of hvitmp by CLNTM
r_1484_cntm.4a
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.4a: hvitmp must be enclosed by CLNTM
r_1485_cntm.7
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.7: 0 min. enclosure of ldntm by CLNTM
r_1486_cntm.7
0 0 2 Apr 23 17:10:14 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
cntm.7: ldntm must be enclosed by CLNTM
r_1487_chvntm.1
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.1: 0.7 min. width of CLHVNTM
r_1488_chvntm.2a
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.2a: 0.7 min. spacing/notch of CLHVNTM
r_1489_chvntm.4
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.4: 0.185 min. spacing of CLHVNTM & NDIFFnoHV
r_1490_chvntm.4
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.4: CLHVNTM must not overlap NDIFFnoHV
r_1491_chvntm.5
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.5: 0.185 min. spacing of CLHVNTM & PDIFF_noENID
r_1492_chvntm.5
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.5: CLHVNTM must not overlap PDIFF_noENID
r_1493_chvntm.3
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.3: 0.185 Min Enclosure of ndiff inside hvi by chvntm
r_1494_chvntm.6a
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.6a: 0.185 min. spacing of CLHVNTM & p+tap (except along the diff butting edge)
r_1495_chvntm.6a
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.6a: CLHVNTM must not overlap ptap
r_1496_chvntm.6b
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.6b: CLHVNTM must not overlap p+diff along diff butting edge (ESDnWellTap excluded)
r_1497_chvntm.7
0 0 2 Apr 23 17:10:17 2020                     
Rule File Pathname: /cadfiles/agui_work/calibre_workareas/7CS8M04AC/drc_efabless_20200423/CDRC_20200123_163711/caldrc.run
chvntm.7: ESDnWellTapHV must be enclosed by CLHVNTM
DENSITY_RDBS
0 0 24 Apr 23 17:10:17 2020
mm1_70_window_700_err.rdb 0
mm1_65_window_700_err.rdb 0
mm1_60_window_700_err.rdb 0
mm1_50_window_700_err.rdb 0
mm1_40_window_700_err.rdb 0
mm1_30_window_700_err.rdb 0
mm2_70_window_700_err.rdb 0
mm2_65_window_700_err.rdb 0
mm2_60_window_700_err.rdb 0
mm2_50_window_700_err.rdb 0
mm2_40_window_700_err.rdb 0
mm2_30_window_700_err.rdb 0
mm3_70_window_700_err.rdb 0
mm3_65_window_700_err.rdb 0
mm3_60_window_700_err.rdb 0
mm3_50_window_700_err.rdb 0
mm3_40_window_700_err.rdb 0
mm3_30_window_700_err.rdb 0
mm4_70_window_700_err.rdb 0
mm4_65_window_700_err.rdb 0
mm4_60_window_700_err.rdb 0
mm4_50_window_700_err.rdb 0
mm4_40_window_700_err.rdb 0
mm4_30_window_700_err.rdb 0